My machine keeps stopping half way through a wash . there are 5 buttons on the left of the machine with lights above . all writing has worn off . the 3rd light flashes when machine stops. do you know the reason for this . many thanks steve (hotpoint aquarius wmm53
This problem used to happen to me with an older washer. It also had a buzzer as well as a flashing light.
I discovered it was the "off-balance" warning.
Next time, try shifting the clothes around so that all the weight isn't on one side of the washer drum
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Susan, First make sure there is still power to the outlet washer is pluged into, may have tripped the breaker/fuse. Could be something as simple as a loose wire/plug, lid switch to something worse like control board. Have a good Tech. diagnose and estimate repair. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
What could cause my washing machine to stop before the ...diy.stackexchange.com/questions/21181/what-could-cause-my-washing...
What could cause my washing machine to stop before the ... i.e. it never reaches the end of the cycle ... What would cause my washing machine to stop at the rinse ...
Beko washing machine, WMA 1512 W stops half way through wash cycle and leaves conditioner in drawer
This video will show you how to keep your soap draw clear
and how to service the parts
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE
And don't forget to like us on
Hi just read your posting.Now select hot fill, high water level,and put 2 pkts of bicarb of soda in the empty tub.Start the cycle and let it fill and then let the machine wash for 5 to 10 mins.Do not let the water drain out.After 5 to 10 mins stop the cycle and let the water and bicarb soak over night.In the morning restart machine and this should clean the bowl.Please reply on how you got on or for further help.Looking forward to your reply.
Hi The light is
flashing due to the door lock error. The door lock is activated as the machine
experienced an error or was stopped in middle of a cycle. Or the door was being
pulled while the machine was running a cycle. Try unplugging your washer and
restart the washer to check if you are still getting the same blinking light.
If error is still not resolved then start the rinse/spin cycle & stop
the cycle, now press and hold the cancel button for 5-10 seconds. However,
if you are still not able to get the door open then you'll need to open the
door manually by disassembling the washer. Hope this helps... Please post back
for any further assistance. Daniel
there is so many reason why your washing machine has stop in the middle of the cycle. i give you simple tips to solve your problem 1. check your main plug if that is in proper connection 2. check if its block out or what ever 3. check the swicth 4. check the load if its over loading 5. check the motor by smelling if its burn....... i hope my simple tips can solve your problem....
52. (00110100) Eco - Diverter Top-up Fault diverter valve made be stuck in half open position ,may be a mechanical obstuction or the wax filled solenoid that actuates it may be faulty .located under machine beside pump .