Question about Audio Players & Recorders

1 Answer

Manual left behind in Afghanistan

My TV does not have a scart socket and I can't get the set top to work. Can anyone help me with setting up instructions? At the moment the aerial goes into the wall aerial socket to a roof aerial but cannot get the box to respond to the remote except for on and off so cannot get the menu to set it up.

Posted by on

  • pfsuzuki Feb 08, 2008

    Hi thanks for the responses. The set top box is a Wharfedale Digital terrestrial receiver DV832BN. Trouble is without the instructions don't know which buttons to press on the remote to tune

  • Jay Henderson
    Jay Henderson May 11, 2010

    Need more information to solve your problem. What kind of receiver is it? and is it a SETTOP BOX? Like a cable box or a satellite receiver?....Keep me posted and maybe we can get u up and running. Smiles.. GURU JAY

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Make sure yo have the leads connected correctly,after you connected an aerial lead from the box to the tv aerial input,make sure the box is switched on then tune the tv until you see a signal from the box (usually 35)if you do it through a video you may find its on the same frequency causing ghosting on the picture,in which case you will have to change the output frequency of the box or thee video

Posted on Feb 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i hookup a sanyo vhr h607 to my television


Unless the VCR has a digital tuner the only way to record off the TV will be to connect it by a scart socket and cable. However to record you would have to watch the TV show you are recording. An alternative is to get a set top box, which are fairly cheap and connect that to the VCR. Some VCR's have two scart sockets one for the TV and a spare one. You can connect the box via the spare one. When setting the recording you will have to select AV2. If the VCR has only one scart socket you might need a scart switching box.

Oct 17, 2014 | Sanyo VHR-H607 VHS VCR

1 Answer

I have a very elderly Philips CRT type TV previously owned by my late father. We use it for our grnadchildren to watch VHS tapes when they visit us as the live TV facility went with the switchover to...


hi if the tv has a scart socket plug scart lead from tv to settop box and it should work fine
crt model numbers are usually right at the back of tv at the bottom under the big bump on back sometimes on the side sometimes even underneath hope this helps need more info please email me

Jun 23, 2011 | Philips Televison & Video

1 Answer

I can't seem to get it to record any shows off my t.v.


the hdmi connections are input only.
if the tv has scart sockets on the back, and the recorder also, connect to these. the tv's scart needs to be either 2 way or out put shown with an arrow pointing out of a box for output and a 2way arrow for 2way scart.usually scart socket 2 is 2way. set the recorder as you would normally but set the channel to tye av or scart that you are using. please note that video plus will not work on the scart socket. you may also have to set the output for the scart socket via the menu.

Mar 12, 2010 | Televison & Video

1 Answer

How do I record on my magnavox dvd/vcr if I don'' have a set-top box?


The only thing you can do is connect a scart lead from the VCR to your TV and set the VCR on the aux position of the scart socket.
You can only watch the show you are recording though.
If the TV has only one scart socket and you are using it for something else. Then I suggest you get one of these:

41e6748.jpg

Feb 22, 2010 | Televison & Video

1 Answer

How to set up Archos DVR Station but unsure how


Hi awillis98 this is Mike Houston of DISH Network, with the Archos DVRstation there will be a USB connection from the device to the DISH Networkreceiver, one the DISH receiver has recognized the external hard drive you willsee pop-ups on the screen that will walk you through the steps to configureyour Archos device. I will send a link to help with the setup for the externalhard drive. http://www.dishnetwork.com/SupportSection/setup-ehd

Apr 21, 2009 | DISH Network ViP622 DVR DTV Receiver /...

1 Answer

Reception upgrade or what ?


Older sets are fitted with analogue tuners which can't handle digital signals. The only way round the problem is if the TV can be used as a monitor via a scart input. The external freesat or digital set top box contain digital tuners which can then display the required digital information on the TV. These external units have scart output sockets at the back, specifically for this purpose. So it's a scart lead from your external digital device to the scart input socket at the back of the TV. The remote control for your external box is then used to select the required programmes

Oct 24, 2008 | Panasonic Televison & Video

1 Answer

Scart Video Control


Do you still need instructions on how to use it?

May 15, 2008 | Televison & Video

1 Answer

Sony 40V3000 - Ghosting whilst viewing via SCART (Freeview is visable through picture)


have you tried plugging your sky box into another scart socket on your tv set

Mar 11, 2008 | Sony BRAVIA KDL-40V3000 Television

1 Answer

Can't re patch tv with set top box to watch tv


Hi.

Ok here goes.

1) Take airial lead from the wall socket in to antenna in on freeview box.

2) connect short usually black airial type lead in to antenna out socket on freeview. plug the other end of this lead in to aerial in on vcr.

3) connect the other end of this aerial type lead to airial plug on the back of tv.

4) now if you have 2 or more scart sockets on the back of tv set plug in the scarts in this order.
Freeview box scart with tv on it connect to scart 1 on tv set.
Freeview box vcr scart connect to vcr in scart socket on vcr.
Vcr scart marked tv plug scart from here to scart 2 on tv
If you have 3 scart sockets on tv you can connect dvd using scart to scart socket 3 on tv.

If Tv has only 1 scart the aerial leads will stay the same as I have stated,
Freeview must go to scart socket on tv set.
leave second scart from freeview to vcr plugged in so you can record freeview by putting vcr to line 1 or AV 1.
you will need to put tv on channel (0) & tune this channel to the video play a tape that you recognise then go to tv tuning & tune tv untill you see video playing then store this on channel (0).
DO NOT USE AUTO TUNING IT WILL PUT CHANNELS IN THE WRONG ORDER JUST USE MANUAL TUNING.

Now to view Dvd you will either need to purchase A scart switch box. Or have keep unpluging freeview scart from tv so you can plug in dvd .

If your tv has red yellow white phono sockets you can plug dvd in to these, you may need to purchase phono leads.

Hope this helps.

http://dysonmanuals.llc.nu/

Chris..

Jan 08, 2008 | Televison & Video

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

101642 Answers

 Grubhead
Grubhead

Level 3 Expert

4767 Answers

The Knight
The Knight

Level 3 Expert

71736 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...