Question about Zebra 110Xi III Plus Thermal Printer

3 Answers

Printer Locked I have a Zebra 110xiIII and when I turn it on all lights light, but nothing appears on the front panel display and the printer locks up... I want to know what I can do to solve this problem.... Thanks Julian

Posted by on

  • Anonymous Dec 03, 2008

    Turn on the printer Zebra XiIII Plus,the front panel display appears nothing and the noise from the Motor take place until the printer power off.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Replace the 3A fuse in the printer logic board

Posted on Dec 05, 2008

Do reset to printer. from setup key.

Posted on Mar 06, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 38 Answers

Time for a new main logic board.

Posted on Mar 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Using MS Access, I am printing labels to a Zebra 110XiIII printer. The output truncates the label to 2" instead of the 3.5" I have the report page settings saved as. I have been through the setup...


First check printer. Change setting "Print Width" to maximum width, save. Switch off. Hold down pause key while switching on (untill all but power light turns off). the subsequent prints should print across the full width. If this is OK fault is with label format.

If you are using windows printer driver check settings there this can over ride printer settings. If using ZPL the problem is most likely in the label format.

Jul 05, 2011 | Zebra 110XIIII Thermal Label Printer

1 Answer

Printer appears to be locked up


If the error light is on it means there is a problem, this should be flashed up on the LCD e.g head open or paper out etc. Try disconnecting the printer data cable and reboot, see if the data light is still on. If it is then you might have an issue with the Main Logic Board

Nov 11, 2009 | Zebra Z4M Printer

2 Answers

LP2844 Printing light


Click start on your computer, go to control panel-printers and faxes folder. Highlight your Zebra printer and select 'printing preferences'. You are looking for a place to turn up the heat settings "Head Settings" or "Heat Settings". These get reset down to the lowest setting when you continually open the cover without turning the printer off first....exposing the printhead to light.

Oct 01, 2009 | Zebra LP 2844 Thermal Printer

1 Answer

Zebra Z4M only feeds a small portion of the label.


You should try a factory reset. Power off the printer. Hold the "pause" and "feed" buttons down while powering up. Allthe lights will blink and when they stop blinking, release the "pause" and "feed" buttons. This will factory reset the printer.

Apr 24, 2009 | Zebra Z4M Printer

1 Answer

LIGHTS ON PRINTER LOCKED UP


Try a reset: press the PAUSE and FEED buttons and turn the printer, release the keys when label feed.

Jan 19, 2009 | Zebra Stripe S400 Label Printer

1 Answer

Zebra 4M Plus - There is no display info when powered on.


Ok so the printer is calibrating and printing which means the fault lies with the display, or power to the display pcb. Check the fuse on the mlb, if that is ok then order p/n G79302M (display panel)

Dec 31, 2008 | Zebra Z4Mplus Label Printer

1 Answer

ZEBRA Z4M LABEL PRINTER LOCKED UP


The printer is Z4M or Z4M plus? I found this error at z4m plus and the solution is to change the motherboard. Roberto Martinez Mexico bartech9@yahoo.com.mx

Nov 14, 2008 | Zebra Z4M Printer

Not finding what you are looking for?
Zebra 110Xi III Plus Thermal Printer Logo

Related Topics:

355 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zebra Printers & Copiers Experts

pkwc

Level 2 Expert

254 Answers

lancer284

Level 1 Expert

35 Answers

kenneth njonjo

Level 3 Expert

1575 Answers

Are you a Zebra Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...