Question about Canon PowerShot A80 Digital Camera

1 Answer

LCD color get mixed

Recently I am facing new problem with My Canon A80 that when I start my cam picture on LCD gets blur like all color mixed in simply like paint even I took picture put display off still the picture is not clear.... can any one pls help me out

Posted by on

  • Sgross Mar 10, 2008

    After spending hours trying to make sure my settings were not off, I went on line and discovered this posting. I have the same problem. When my Cannon A80 is in the picture taking mode, the screen is blurry, like dripping colors. When it is in the picture viewing mode, the previously stored pictures are fine. I called Cannon as you suggested and they are sending me a shipping label to mail them the camera to establish if it is the image sensor. I asked them to describe an image sensor gone bad, and bingo, sounds like my problem. If so, they said they would repair it and send it back. I am keeping my fingers crossed.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Canon Master
  • 4,738 Answers

This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is worldwide, and regardless of your camera's warranty status. Please check the following two links for more info:

http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html

http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819

Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110, IXUS V2/300/400/430/500, IXY Digital 200a/300a/400/450/500

Posted on Feb 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Viewfinder shows blurred images


First, rotate the mode selector dial to "Auto", then check to ensure that you're not in macro mode. Also make sure that your lens is clean and there are no smudge marks.

If you've done all the above, and you're still getting blurred images, this then might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check this link for more info.

Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110, IXUS V2/300/400/430/500, IXY Digital 30/30a/200a/300a/D320/400/ 450/500

Dec 19, 2009 | Canon PowerShot A80 Digital Camera

2 Answers

Lcd screen blurred and the viewer has a purple color to it


it is because of bad ccd imager chip in your Canon A75 camera that needs to be replaced.
Canon will replace it free of cost, click Canon CCD Imager Advisory for details.
Thanks.

Sep 27, 2009 | Canon PowerShot A75 Digital Camera

1 Answer

THE lCD broken but the cam normal ,still on, can take a picture


Certainly your camera is damage by mishandling. Sometimes repairs cost more than buying a new one. so better ask first the cost of repair before having it done. don't hate it's your fault anyway. Charge it to experience.

Sep 22, 2009 | Canon IXUS 860 IS Digital Camera

2 Answers

LCD screen doen't display the view


So camera doesn't give live view to take picture? and you can view old / stored  pictures OK, is it?
If yes, then it is problem of CCD imager in Canon A80 and this part needs to be replaced.
Canon will repair your A80 free of cost as per announced scheme of CCD imager support.
Click Canon CCD Advisory to know how to get free repair facility.

Jan 07, 2009 | Canon PowerShot A80 Digital Camera

2 Answers

Canon A80 CCD problem or something else?


Open the camera, look at the Flat-cable going from the CCD to the 'camera HW', there is a small connector where the latch mecanism is open,-meaning it does not put pressure on the commenctors and if you touch the flat-cable you can see the flicker/lines, simply use a pen tip to lock the connector latch again, or apply som glue to fix the connector.

Mar 23, 2008 | Canon PowerShot A80 Digital Camera

1 Answer

Blur image in viewfinder and LCD display


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:

http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html

http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819

Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110, IXUS V2/300/400/430/500, IXY Digital 200a/300a/400/450/500

Dec 23, 2007 | Canon PowerShot S1 IS Digital Camera

1 Answer

Only Red


This definitely sounds like a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:

http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html
http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819
Applicable cameras1.gif include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110, IXUS2.gif V2/300/400/430/500, IXY Digital 200a/300a/400/450/500

Dec 10, 2007 | Canon PowerShot S500 IXUS 500 Digital...

4 Answers

Lcd is blery


What you describe may be caused by several different faults. Do the pictures from the camera show the same blurry washed out look? It may be either the aperture is stuck wide open, or the shutter may be similarly stuck open. Can you describe the symptoms further?

Mar 06, 2007 | Canon PowerShot S410 / IXUS 430 Digital...

1 Answer

Blurness of the LCD of my Canon A80 Camera


This is a defective CCD known to Canon. They will repair it FREE of charge. Go here for more detail: http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=223&modelid=8044&keycode=2112&id=29819

Dec 04, 2006 | Canon PowerShot A80 Digital Camera

Not finding what you are looking for?
Canon PowerShot A80 Digital Camera Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Digital Cameras Experts

Doberman

Level 2 Expert

246 Answers

Tony

Level 3 Expert

2598 Answers

halotheracer
halotheracer

Level 2 Expert

68 Answers

Are you a Canon Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...