Question about Computers & Internet

1 Answer

Running vpn to the office through a netgear FVG318

I am trying to connect to my office through VPN.
Somehow the NAT in the netgear keeps the computer i am using from recieving valid packets.
I have vpn pass through on and I tested with port forwarding.No Luck.

I use a recently bought NETGEAR ProSafeā„¢ 802.11g Wireless VPN Firewall FVG318

Posted by on

  • jeddy941 Oct 02, 2008

    Trying to connect using hostname at one end. The FVG318 is NAT'd behind a Verizon modem. Can't get past IKE-phase 1 negotiation.

  • mbessler Feb 20, 2009

    Trying to connect using hostname at one end. The FVG318 is NAT'd behind a Verizon modem. Can't get past IKE-phase 1 negotiation.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Check all the computer having network cards enabled.if it is present give all the machines the ip address and share the partions of all the computers

Posted on Feb 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have two Cisco routers one is a 501Pix(located at branch Office), the other is a 515E Pix (located at main office). I've configured a vpn tunnel to the router at the main office. The router at the branch...


Hi,
  1. Please check whether the Tunnel Phase 1 and Phase 2 are Up.If Not Proceed Next, if Yes Proceed to point 4
  2. Please check the peer IP is reachable
  3. Please check the configuration and the encapsulation method used
  4. Check whether in the Match Address whether the IP has been Allowed If Yes Proceed Next
  5. The Branch PIX will be in the Outside interface of the Main PIX, security Level will be enabled so do NAT. If Yes Proceed next
  6. If unable to ping enable the Inspect ICMP in the global policy to enable ping If Yes
  7. If all The above are done. please check the routes between the 2 remote computer.
Please check all the above point, surely your problems will be solved

Feb 26, 2011 | Cisco PIX 501 Firewall

2 Answers

How to connect my MSSQL server through VPN by using PPTP


192.168.1.X is a local ip address ,, i trust that thhe vpn is in seperate places and is done with the wan ip over an internet connection?????

OK maybe the problem isnt on your side but the main office building,, when connecting , have someone looked for repeated attemps to connect by observing the fire wall,, if it appears to be blocked byu the firewall simply diasable any and try it out.. If it works then all you need to do is set the firewall correctly..

I was reading the ip address in your original post and those are local address,s are you certin the VPN is correct ???? did you use the correct STATIC IP ADDRESS ASSIGNED BY YOUR ISP??

Jan 20, 2008 | Cyberguard SG300 (00852503000366) Firewall

1 Answer

I have an older Cisco PIX 506 with two VPN connections. One links two offices (PIX-PIX VPN) together, another is for staff to access email & files. The file server on the local LAN the PIX is on are...


It could be a missing route... are the file server and email server on the same subnet? If they are then it is possibly not a routing issue.

Also it would be worth checking the tunneling settings for the VPNs... if you have specifed either only the fileserver subnet or specifically the file server address, then this could be the reason they can get to nothing else.

Hope that this has helped a little :)

Apr 09, 2010 | Cisco PIX 506E 3DES/AES bundle (chassis,...

1 Answer

How to login netgear prosafe vpn firewall


U can login to the prosafe vpn firewall using
http://192.168.1.1

And for further Queries u can read the documentation :
ftp://downloads.netgear.com/files/FVS338_RM_28Feb09.pdf

Jan 02, 2010 | NetGear ProSafe FVS338 (FVS338NA) Firewall

1 Answer

VPN tunnel establish using FQDN for remote end point address


Yes you can do as you expect.
ScreenOS Concepts & Examples ScreenOS Reference Guide, Volume 5: Virtual Private Networks Chapter 4 -- Site-to-Site Virtual Private Networks

"Route-Based Site-to-Site VPN, AutoKey IKE" Example
"Route-Based Site-to-Site VPN, Dynamic Peer" Example
"Route-Based Site-to-Site VPN, Manual Key" Example
"Setting AutoKey IKE Peer with FQDN" Example
"VPN Sites with Overlapping Addresses" Example ScreenOS 5.4: http://www.juniper.net/techpubs/software/screenos/screenos5.4.0/CE_v5.pdf

ScreenOS 6.0: http://www.juniper.net/techpubs/software/screenos/screenos6.0.0/CE_v5.pdf

May 03, 2009 | Juniper Networks (SSG-20-SH-WW)...

1 Answer

Cannot connect to company email and network through VPN


Could you please explain me how to you are trying to establish the vpn its a site to site or site to client
another thing if you are connecting to head office through mobile user client behind any natted device you should enable nat traversal in your firewall then only i will works.

Mar 25, 2009 | WatchGuard Technologies WatchGuard Firebox...

1 Answer

Private network > VPN > network firewll > priv net


Add a static route on the Sonicwall 2040 : 192.168.1.0/24 with the RV082 as gateway (the ip of the network shared between the RV082 and the Sonicwall)

Another solution is to enable NAT on RV082 for 192.168.1.0/24 network. Routing is preferable.

Feb 14, 2009 | Linksys RV082 10/100 8-Port VPN Router...

2 Answers

I want to create site to site vpn with sonicwall tz170+ 2003serv


Complete documentation is available on the below link

http://www.sonicwall.com/us/support/3134.html#heading_3139

Nov 17, 2008 | Sonicwall TZ 170 NFR (01-ssc-5564)...

1 Answer

VPN connects Remote desktop will not


Make sure that the firewall doe's nt block tcp traffic on port 3389.
Hope this help.
Usually all the traffic should be allowed thru the tunnel.

Sep 03, 2008 | Computers & Internet

2 Answers

Exchange server access problem.


If your cisco vpn client is behind the natted device then you need to allow nat traversal in the head office firewall and if you connect the vpn client through data card it will connect,

Aug 01, 2008 | D-Link NetDefend DFL-700 Firewall

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

578 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

98868 Answers

David Payne
David Payne

Level 3 Expert

14088 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...