- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
set time/datepush the pusher at 4:00 for couple second to start setting mode.pusher at 4:00 is to select time/date, pusher at 2:00 is to adjust time/date 2. if off sync between analog and digital clock happen. You need to resynstep 1: follow the instruction 1 to set digital clock to 12:00.step 2 : push and hold both pushers at 2:00 and 4:00 for couple second until it shows sync modestep 3: once it enter sync mode, you can use pushers at 2:00 and 4:00 to adjust the analog time to 12:00 same as digital.step 4: push the pusher at 3:00 to exit the sync mode. step 5: follow the instruction 1 to adjust digital time to correct time. Analog time will adjust it automatically.
mcdevito75 here, Sounds like the electronics in your Casio watch shifted just a bit and are on the high point of the button actuator. Look for a small watch repair shop in your area, they"ll have to open the watch and make an adjustment.
Click on my profile (escapement), then click on Tips and Tricks. There you will find links to all watch manuals. Try similar watch instructions till you find the right one, because GUCCI do not give manuals. Rate me, please
First look for the set button then press it ,a long press and If it is blinking that's the time you to select the hour ,the minutes,the day/date,the alarms and the special features of your watch.The right button the up and down or for scrolling.Try all of this so your time will set.
Hi Junell ,you can't pulled out the crown,because it is threaded.First unthreaded it before you pull,first pull is for DAY/DATE adjustment.Second or full pull is for Hour / Minute setting,that's all.Feel free to ask and post a message,so i can assist..
I called the local Fossil Outlet in Lancaster, PA and got them to explain how to change the time. By phone they are 717 396-0823
There are four buttons on the watch.
Press the set-el botton once followed by the mode button once and this will put you into the condition to make adjustments. Each time you press the mode button a different adjustment can be made....so you go from hour to minute and so on
Once you get to the adjustment you want to make you use the right two buttons to increase or decrease the setting
Im a watch technician,and when im make adjustment to a new watch for me i dont need any manual,the thing ive done is keep pushing and pressing the button and observed what happen and the result i write what im discover new to me.When setting a baby g watch find the set and press it for 10 seconds.then your watch will flashing then go to mode button and choose what you are going to set.The hour ,the date ,the alarm whatever is there to set desame you going to do , only the set button need along press.Message me whatever you discover .