Question about ASUS 52X CD Duplicator - Black 1-1 (HDW01X0444001) Burner

4 Answers

DVD stand alone

How do I keep up maintenance. How do clean the reader and duplicator when I am able to select only one source drive. I am having trouble with pixelation even if I am burning at 2X the speed

Posted by on

  • 2 more comments 
  • You KNow Dat Feb 06, 2008

    I cleaned the reader lense with a CD cleaner but the burner I am asking about. I am not able to clean that because I can not select it as a source. of course when I place the cleaning cd in there nothing happens because it is not a reader.

  • You KNow Dat Feb 06, 2008

    when I play the copy that was made it pauses at times throughout the movie and skips

  • You KNow Dat Feb 06, 2008

    authorized service of the board? How do I do that...

  • You KNow Dat Feb 06, 2008

    Do you know of any authorized service person here in Hawaii. It cost us almost the price of a new duplicator to ship it to the states and back and pay for service...hehehe Thank You

×

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 1,894 Answers

If pix elation is getting troubled then the problem is with the BOARD inside.
the lens cleaning wont help in this case. because the burning process is something that is the culprit.
and hence a authorized service of the board may solve this problem i think.

Posted on Feb 06, 2008

  • dewan nafees ahmed Feb 06, 2008

    it means some authorized person of that company should service the main BOARD of your set.
    that seems to be the problem.

    because your problem lies in hearts of the set. information is being read by lens. but next stage of process is not going good. and so only a authorized service person must handle it.

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 146 Answers

With the times, cd laser/lens becomes weaker or also due to dust... if you want to clean up your cd duplicator lenses, you should use lens cleaner cd, the one with a brush over it... that is the easiest way to clean your cdrom lasers..

Posted on Feb 06, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

    Sergeant:

    An expert that has over 500 points.

  • Master
  • 440 Answers

Use dvd cd lens cleaner disk ok fiber optic brushed on it what brand dvds uusing sum willl act up never burn full speed 8x max ok thx nick

Posted on Feb 06, 2008

  • 5 more comments 
  • nick helpap
    nick helpap Feb 06, 2008

    ya thats what i just said also cheak for firmware updates

  • nick helpap
    nick helpap Feb 06, 2008

    bamma boy we all just said that ok no need to say same thing thx nick

  • nick helpap
    nick helpap Feb 06, 2008

    also cheak inner ide cables condtion they get bad also ok thx nick

  • nick helpap
    nick helpap Feb 06, 2008

    well dvdid u use latest dvd fab plat software cuse i bet bad dvd gliches in 1st master copy ok

  • nick helpap
    nick helpap Feb 06, 2008

    i would try to re burn your master dvd ok bud with dvd fab platuim thats the problem bad master ok choking up and burnn slower mark me as fix ya thx nick

  • nick helpap
    nick helpap Feb 06, 2008

    does it do it on anther dvd also cheak frimware update try differt dvd brand ok +r

  • nick helpap
    nick helpap Feb 06, 2008

    thx again for using fix ya

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,944 Answers

Hi,

To clean the drivers you need to use a lens cleaner. What exactly do you mean by pixelation?

Posted on Feb 06, 2008

  • Damen Wong
    Damen Wong Feb 06, 2008

    I mean drives not drivers...sorry.

  • Damen Wong
    Damen Wong Feb 06, 2008

    Did you try higher quality empty discs? Maybe the discs are causing the pixelation.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Acard duplicator comes up 'source drive not ready' it has been working fine untill now is it just a case of replace the disc drive or is it more serious?


Have you tried to upgrade firmware ?
If this is up to date and still causes function error try to Completely uninstall all software for it and reinstall....

May 15, 2012 | Acard ARS-2030PC 1-to-3 Target USB Card...

1 Answer

Acard duplicator - 'Source drive not ready'


> source drive not ready

When you push the button to open/close the drawer, does it work,
i.e., is there electrical power reaching the drive?

Did you put a disk into the "source" drive?
Is the same disk recognized when you put that disk into any other computer?
If so, then the "source" drive is damaged, and needs to be repaired/replaced.

Jul 18, 2011 | Acard Technology 15 CD DVD Duplicator...

1 Answer

What is the specification of this casing?


Introducing the NEW high-performance stand-alone CD/DVD duplicator systems. These duplicator systems are perfect for heavy production runs since there is no cooling period needed between runs. Beginners and advance users alike will find this system beneficial because of its ease of use speed accuracy and reliability. All it takes is a simple press of a button to get the duplication process started. Let the NEW high-performance stand-alone CD/DVD duplication systems serve as your solution for data backup music video duplications and much more!
  • Supports DVD+/-R DVD+/-RW DVD+/-R Dual Layer CD-R CD-RW blank media standards
  • Intelligent design automatically recognizes the source disc format
  • ?User friendly÷ controller utilizes familiar ?ESC÷ & ?ENT÷ keys with tactile feedback for easy navigation
  • System is upgradeable via firmware
  • Password protection modes prevent unauthorized usage
  • ?Dynamic÷ hard drive partition system saves HDD space by creating partitions according to the image size
  • Allows editing of image and hard drive partition file name
  • Fully stand-alone system - No computers needed!

Feb 10, 2011 | Sony 20X Burner/1 to 11, Black Casing...

1 Answer

I have a Pioneer CD/DVD Duplicator 8 drives. Recently no matter what disc I put in as the master. It tells me I have a mad Master Disc. Obviously all the media can't be bad. When this messgae pops...


The 3rd drive is the master now. If you want to change back to top drive, go to #8 "select source" and use up/down key change to " drive 1 " and save. for more detail, please read the user manual page 21 and 22.

For VPD system,if the top drive defected, the system should auto assign 2nd drive as source, but your system pick up 3rd drive as source drive, I suggest you check drive 1 and 2 before make copy.

Jan 04, 2011 | Pioneer 1 to 7 DVD Duplicator: SharkCopier...

1 Answer

How to work it


It is a stand alone unit so you do not need a connection to your computer. Put your source disk in tray 1. Put your target disks in 2, 3 and 4. Then use the display panel arrow keys to start the duplication process. Note, this unit only supports certain disc formats.

Jul 10, 2009 | EZ Dupe (EZD3TCDLO) CD-RW Burner

2 Answers

Targer drive not ready.


"Target overflow" just means that the disc being used to make the copy doesn't match in size. "4.7GB" to the master disc. Sometimes this occurs when you make a mistake thinking the disc in the copy slot is a DVD blank but it may be a CD-R blank(by accident) or sometimes the Master disc is a BD-R and trying to copy to a regular DVD-R (won't fit)

"Source drive not ready" is when the Master disc keeps spinning in the attempt to read. The "culprit" alot of times is the brand, or scratched, dirty, corrupted discs.
Make a copy of the master again (if possible and on your PC with a different brand of disc) then use the new Master to make the multi-discs you want.

"Target drive not ready"
is when a disc with information already on it, is in the copier (can't copy over it) sometimes we make mistakes and put the Master in the copier and vice versa : )
or no disc in it at all, and or some sort of incompatible blank media.

I have a 7 disc duplicator by Pioneer and I found that in the last few years since I've had it (since 2005)
I ran into the above situations alot.
I use it as a standalone (not hooked up to any PC etc)

It still works great but I find that was having a brand name issue with the discs; certain discs that it used to read in the Master/Source drive like Taiyo Yuden, Memorex, Ridata, SKMAX, and Phillips, suddenly don't want to read properly when inserted. The discs keeps spinning and then when you press "copy" it says "Target overflow" or "Source drive not ready" I found that solution I mentioned above with the changing of the disc brand helps fix the situation. I didn't want to hurt my brain trying to figure out what it could be as I use my duplicator for business and time is money.

Through trial and error I end up just making duplicates from my PC on different brands (cheaper unknown brands work fine) and then using the "new master" made from these is the only way I can duplicate..weird!

P.S sometimes the lens may need an old fashioned cleaning with a lens cleaner or Dust blower.

Once in a while one or two of the doors get stuck even when all 7 discs are completed...just take a q-tip with vaseline and put it on the track wheel for some lubrication and the door will open up easier.
Just some tips from someone who's had their player a long time

Hope this helps anyone in need out : )

Jun 20, 2008 | Acard Technology (ARS-2030LD) DVD±RW...

1 Answer

Source drive not ready on 1 - 7 cd/dvd copier


is it old? when a ROM have trouble in its lens that won't enable it to read any disc, then it will always tell you that drive is not ready.

Jan 17, 2008 | Acard Technology (ARS-2030LD) DVD±RW...

2 Answers

Acard burner


install the cd software that came with it.

Nov 12, 2007 | Acard Technology (ARS-2030LD) DVD±RW...

1 Answer

Telex Spinwise CD-DVD Duplicator - Source Drive Read Disk Error


i have a telex Spin dupilactor Cat/Model # 301931000*4-16D and i am Looking for a price to insure it. a replacement price

Oct 19, 2007 | Telex SpinWise 7-824D (301689000)...

1 Answer

Telex DVD 7 tower Duplicator


it's not the heads that actually have the problem, it's the head guide that's sticking whenever it reaches those tracks mentioned. you need to open the drive initially to be able to repair or clean the malfunctioning parts. the read-write lenses be cleaned with cotton buds, and the stainless steil head guides be wiped clean and oiled.

May 16, 2007 | Telex SpinWise Seven Drive (301735000)...

Not finding what you are looking for?
ASUS 52X CD Duplicator - Black 1-1 (HDW01X0444001) Burner Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top ASUS CD & DVD Burners Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Gareth Cockram
Gareth Cockram

Level 3 Expert

657 Answers

Are you an ASUS CD and DVD Burner Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...