- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I'm getting CL too, and don't know what that means, but I DO know how to get your remote phones to work. Before I lost the manual I had to do that. Simply set each one in the main charger for about 20 seconds and they will work.
We had this same problem and seeing that the Manual is incorrect, I searched GE website manuals to find a different one that at least looked like the right model and found out how to clear the CL message code. This is just a time/day setting and it is to be done by the handset, not the base unit, With the handset, press the flash key, then press #8. You should now see the time flashing in the display. Adjust the time then press the pound key. Now the day is flashing in the display. adjust the day with the up arrow, then press the pound key to finish. Your base unit will announce the time and day is set and the CL is gone.... good luck
My phone was also flashing CL and the 0, after a power outage. After I set the date and time it was fixed. Press the flash button on the handset and use the caller ID buttons to set AM or PM; use the numbers to input the correct time. Then press #. Repeat for setting the day and press # again.
The flashing CL means the clock on the phone has not been set. You can try to set the clock using the Menu option on the handset, but the easier option is to simply call the phone from another number. When this happens, the base of the phone gets a CID time and date stamp from the time calling, and the clock is set. You'll notice that the CL is no longer flashing after the phone has received the call. You don't even have to answer the phone- just let it ring once or twice and you're all aces.
The blinking " CL " is the code that tells you the clock needs setting, any type of power interuption will cause this . To set this , Look to the back of the answer machine / dock there you can set the day and time by holding in the desired button untill it reaches the desired setting.