Question about Linksys SPA-2102 NA Analog VoIP Adapter (2) FXS, (2) RJ45 (SPA2102-NA)

5 Answers

Password recovery on SPA2102

If I forgot my admin password in SPA2102.. how can I recover it or is there a way recovering the admin password?.

Posted by on

  • 2 more comments 
  • Anonymous May 02, 2008

    i forget password spa2102 linksys how to finout

  • Anonymous Nov 25, 2008

    hello, all that I can understand it's that the solution for loosing the password is to have the password for a factory default?



    doesn't have some switch or else as many routers?





    (sorry my english :P )

  • nazmul_is745 Feb 06, 2009

    i forgot my password i want to remove my password

  • fabete Mar 27, 2009

    please i have a linksys spa-2102 and i don't know how to instal the device please help thank you

×

5 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

You may try to set to factory default. from the phone you can perform Factory Reset, Press 73738 then Press 1 to confirm.
Press * (star) to cancel.
If necessary, enter the password. The Phone
Adapter will request confirmation; enter 1 to
confirm. You will hear, “Option successful.”
Hang up the phone. The Phone Adapter will
reboot, and all settings will be reset to their
factory default settings.
If you need further assistance please post your question

You idiot, the problem is, he doesn't have the password, how is he going to do that without it? If you're going to offer advise in here, make sure to read the entire problem first before blurting out stupid or ignorant sh*t that has nothing to do with the problem itself.

Posted on Feb 28, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 689 Answers

You may try to set to factory default. from the phone you can perform Factory Reset, Press 73738 then Press 1 to confirm.
Press * (star) to cancel.
If necessary, enter the password. The Phone
Adapter will request confirmation; enter 1 to
confirm. You will hear, “Option successful.”
Hang up the phone. The Phone Adapter will
reboot, and all settings will be reset to their
factory default settings.
If you need further assistance please post your question

Good Luck

Posted on Feb 06, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

****73738# i want to remove my password

Posted on Apr 17, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

You can
**** 101 # then set the
Enter 0 to use DHCP
Enter 1 to use Static IP
Enter 3 to use PPPoE

**** and 110 # checks the wan ip
**** and 210 checks the LAN ip

**** 111 will allow you to set static ip example 192*168*1*11
**** 161 for setting the dns

oh you might need to enable the web interface for the wan
**** 7932
Enter 1 to enable
Enter 0 to disable

i sure hope this helps

Posted on Aug 14, 2014

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

What does this reset do everywhere says reset reset reset, but i have my internet set by this. will they all vanish. proconfig.com ruined mine told me i need static ip change it save it done that noow i have ip set as 0.0.0.0 and cant access the config. grrrrrrr and my phone dont work. cant phone my isp as have no phone. emailed them yet to get a reply. it was on dhcp/ppoe before i changed to static. just want to revert back to the way it was

Posted on Feb 07, 2013

  • joecanadian
    joecanadian Aug 14, 2014

    **** 101

  • joecanadian
    joecanadian Aug 14, 2014

    Enter 0 to use DHCP Enter 1 to use Static IP Enter 3 to use PPPoE

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Forgot my password


Dear A,

Please go to the Manual Library link provided directing you to the Access page NetComm 3G9W User Manual Access Control Services . Take note to the drop down menu and the steps to follow. On page (40) is the password help NetComm 3G9W User Manual Ip Addresses Passwords . Follow to the site NetComm Wireless to accomplish the changes.

Fare. Well.

Jan 03, 2014 | NetComm Myzone 3g Router 3g24w /w Next...

1 Answer

Wifi networks password


Turn over router and check in the bottom default access IP address and then type that IP address in to your
browser. Then it shall ask you for ID and password. Enter `Admin` or `admin` as ID and `Password` or `password`
as password. You will see a web based setup opened in front of you. Go to the Wireless Lan settings and then you
will SSID so change the SSID and this would be your network`s name. Then go to subsection security and select
WPA2-PSK or simple WPA-PSK then enter your desired network key. Once done with all these things the click apply
and reboot if prompted.

Mar 03, 2012 | Linksys SPA-2102 NA Analog VoIP Adapter...

1 Answer

HOW CAN CHANGE MODEM PASSWORD


Turn over router and check in the bottom default access IP address and then type that IP address in to your
browser. Then it shall ask you for ID and password. Enter `Admin` or `admin` as ID and `Password` or `password` as password. You will see a web based setup opened in front of you. Go to the Wireless Lan settings and then you
will SSID so change the SSID and this would be your network`s name. Then go to subsection security and select
WPA2-PSK or simple WPA-PSK then enter your desired network key. Once done with all these things the click apply
and reboot if prompted.
Good Luck

Oct 21, 2011 | Linksys SPA-2102 NA Analog VoIP Adapter...

1 Answer

Linksys spa2102 i forget the password


Okay here is what you need to do.
try username : user
password : 1234

or

dial ****73738#

if it asks for a password use 8995523# or 7756112# or 5465866# or 50274537# or 78196365# (one of these numbers should work for you)

Hang up.

to check your linksys pap2 IP:
Pick up the phone dial ****110# The voice will tell you the current IP address. Write it down. Now you put that IP address in your browser and you should be able to get into your box type

http://192.168.1.103(for example)/admin/advance

Press enter.

Feb 04, 2011 | Linksys SPA-2102 NA Analog VoIP Adapter...

1 Answer

I forgot my password for my Linksys SPA-2102 phone adapter and router, how can reset it without the old password


You may need to reset your device and you will see a reset button at back of your router so all you need is to keep holding it for 10 seconds then unplug the power jack for like 1 min and then your device shall be reset.But please make sure to backup your all settings first...
Then turn over router and check in the bottom default access IP address and then type that IP address in to your browser. Then it shall ask you for ID and password. Enter `Admin` or `admin` as ID and `Password` or `password` as password. You will see a web based setup opened in front of you. Go to the Wireless Lan settings and then you will SSID so change the SSID and this would be your network`s name. Then go to subsection security and select WPA2-PSK or simple WPA-PSK then enter your desired network key. Once done with all these things the click apply and reboot if prompted.

Dec 20, 2010 | Linksys SPA-2102 NA Analog VoIP Adapter...

1 Answer

My linksys spa2101 is locked, i dont have the password, what can i do


If you forgot your user and password of router then press RESET button of router for 10 seconds it is in back side of router. Then all settings defaults. Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then configure wan settings and lan settings enable wireless if you want to use wifi . If you forgott WEP password in wireless security note down the WEP code it is your password to connect wifi.Then save settings and restart router. Let me know if you need further assistance. Thanks for using FixYa.

Sep 06, 2010 | Linksys SPA-2102 NA Analog VoIP Adapter...

2 Answers

I just bought a SPA-2102 NA, is it possible for a voip provider to lock me out of my device ?or set a password so i cannot reset the device I paided extra to the the unlocked NA version so that i would be...


Yes - if you set provision enable to "yes" or resync from SIP to yes, they can then set your SPA to download a configuration file with an admin password you don't know.
Seems pretty rude (as in legally actionable) if they have actually done this.

Nov 13, 2009 | Linksys SPA-2102 NA Analog VoIP Adapter...

1 Answer

LinkSys SPA 2102


try this out
power on your linksys
then pick up the phone connected to that linksys
no dile tone required
dial ****
when it says configuration menu
type 73738#
if ask for password then nothing can help you buddy
and if it says press 1 to save then press 1 and your device is reset with factory default

Feb 05, 2008 | Linksys SPA-2102 NA Analog VoIP Adapter...

2 Answers

Password of linksys spa 2102


The Linksys comes with web admin access disabled.

To enable it, pick up phone, dial **** then 723646# , when asked for password, dial 78778839# , when asked for value dial 1# then dial 1 to save.

Then, go to »192.168.0.1/admin/voice/advanced , enter user and password.

If you did a factory reset, you will need to call Linksys technical support.

Nov 09, 2007 | Linksys SPA-2102 NA Analog VoIP Adapter...

Not finding what you are looking for?
Linksys SPA-2102 NA Analog VoIP Adapter (2) FXS, (2) RJ45 (SPA2102-NA) Logo

4,638 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Modems Experts

Suddenlink Help

Level 1 Expert

43 Answers

Gregg Errera
Gregg Errera

Level 1 Expert

42 Answers

Andrew Kerchen
Andrew Kerchen

Level 2 Expert

47 Answers

Are you a Linksys Modem Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...