Question about Sony VPL CX5 Multimedia Projector
I have opened up the projector and tested the power pack and it is functioning OK the fuse was blown however though power is available at the lamps pwer board the lamp does not fire
I downloaded the schematics and drawings for $US9.00 and found what I thought may have been a thermistor turned out to be a fuse. Obtained one from Sony spares and it is now OK. If it is possible would you guys know the value of the fuse [amp/milliamps??] If you are familar it is fuse 2P connected to C board, it looks like a small lump of plastic or diode block. The cost of the fuse is outragous from Sony. I hope I do not have to replace it again. However, if I do I would love the valua and I could see if I could get one from Radio shack or someplace similar. If I was not retired I would buy one and put it on a step tranny and watch the ampmeter for the blow current. But, thats life when you decide to retire. I believe the voltage value is 3volts??
Would appreciate any feed-back on the value of the fuse.
And I hope this may help others
Thanks and Good-day
Posted on Mar 01, 2008
Tips for a great answer:
Mar 10, 2011 | Sony VPL CX5 Multimedia Projector
Dec 20, 2010 | Sony VPL-CX61 LCD Projector
Aug 10, 2010 | Sony Multimedia Projectors
Feb 02, 2010 | Sony VPL-EX4 Projector
Jan 30, 2010 | Sony VPL-ES4 Projector
Sep 11, 2009 | Sony VPL CX5 Multimedia Projector
627 people viewed this question
Usually answered in minutes!