Question about Casio EXILIM ZOOM EX-Z850 Digital Camera

2 Answers

LCD Display not working.

When I switch on the Cam I see a dark patch. I am able to take pictures though nothing is visible through the display. Something must have got pressed hard due to which the LCD display is not showing up. Where can I get it fixed and how much would it cost?

Posted by on

  • Chris Liang May 11, 2010

    Smithiboini,

    Do you have a warranty on this Cam? I would try calling Best Buy for details on a broken LCD display as well as the cost. The cost is dependent upon what needs to be done, whether it is wiring, pixels, or needing to replace the whole screen.
    To replace the whole screen may cost in the neighborhood of $200-@300. If the cam can still take pictures, try using the old fashioned routine and peer through the lens if you can wait.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 28 Answers

If you can’t find a fix there is a guy in South Carolina who sells good used parts. I bought a LCD from him for $39.00 and it works great. I think his email is gerald.ray@aa-ark.com

Posted on Mar 08, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,985 Answers

Cameras at certain levels of sophistication are considered 'disposable'
In other words like most other small electronics there is no repair or spares set up.
That is not to say there are none - parts from salvaged items are available
but the reality is the cost of those parts place techno time make it uneconomic.
If you can live with out it then go for it
otherwise a few bucks more and you get the latest piece of kit.

Posted on Feb 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Viewfinder is dark until picture is taken.


Have you tried pressing the display button ? It should switch from LCD to viewfinder.

Jan 26, 2013 | Canon PowerShot G2 Digital Camera

1 Answer

LCD Display is Black


the image in the LCD monitor will darken in strong sunlight or bright light. This is normal occurrrence in device CCDs and does not contitute a malfunction. This image will not be recoded when shooting still photos, but it will be recorded wihen shooting movies.Read you owner manual and adjust the MENU, according with your o. manual.Otherwise you must go the repair shop
God bless you
8_1_2012_6_43_07_am.jpg

Jul 31, 2012 | Canon Cameras

1 Answer

Hi, When the camera is turned on, the LCD diaplay screen is blank (dark) and just displays various information icons for batterly level, megapixels, quality, flash-on, etc. When I try to take pictures, the...


The display being blank can be due to failure of the LCD or the CCD which is the optical sensor of the camera. So to confirm check the older picture to be seen on the display. Confirm this by checking the card on your PC. If the images/picture is seen to be of good quality, then the LCD can be faulty, fault on the linking cable or the control board.since you are able to seen the ICONS the LCD is good , Now if the picture taken are seen well the CCD is also OK and the fault seems to be a digital logic gate failure as there is no switching of the circuit .

This might require a probe and it might be a relative issue in the motherboard circuit or the processsor. Remove battery , press down all buttons to drain off voltage and see if the camera resets.

Thank You for using fixya

Sep 27, 2011 | Vivitar ViviCam 4345 Digital Camera

1 Answer

Picture quality is not good. lot of lines in the picture, also photo becomes either too bright and nothing is visible,or too dark or with lot of lines


something wrong with your lcd screen. it will not display the picture clearly. you need exchange or send it to the maintance center in the local.
www.skiliwah.cn/
http://www.digitalcamera-parts.net/
e-mail:e-8090team@hotmail.com

Aug 26, 2011 | Panasonic Lumix DMC-TZ3 Digital Camera

1 Answer

No display on the LCD.


maybe its a dead battery or scratch the oins of battery and cam

Jun 19, 2009 | Nikon D2H Set Digital Camera

1 Answer

Camera does not react


I quote: "A couple of days ago after using it when trying to see the pictures on the camera the LCD did not show anything. The lens reacted and even take pictures but nothing was visible on the LCD screen."

That means that there was a problem either with a LCD display or with ribbon cable.

Now:"I tried charging the battery and removing it from the camera, now the camera only does a bit sound when switching on but nothing else, the lens does not even come out."

That means that the ribbon cable had probably shorted, now the camera may be furtherly damaged.

The camera must be disassembled to access the LCD and fix the problem.
The repair must be done by an experienced technician, as to access the LCD you need to remove both covers.

Jan 07, 2009 | Casio EXILIM ZOOM EX-Z850 Digital Camera

2 Answers

LCD Display Blank


I have a sony cybershot DSC-S650, the LCD was very dark and could not see anything except if I pointed it at a bright object, everything else worked ok. I could take pictures but could barely see them in playback as well.

I took it to Sony authorised repair outlet and was told the CCD was damaged, they charged me USD $55 to repair it (in Quito, Ecuador)

Jul 31, 2008 | HP Photosmart R607 Digital Camera

1 Answer

Canon digital camera display issue


i did hav the same cam tat u hav.... n i actually had the same problem.... there was some problem with the circuit.. n when i had given it for service... it din seem to work... so id recommend u to get a new cam....

Mar 23, 2008 | Canon PowerShot A620 Digital Camera

2 Answers

LCD Display Blank


CCD malfunction, common with Sony manufactured CCD chips. You are in luck, its a free repair regardless of warranty date.
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=223&modelid=8044#

Feb 12, 2008 | Cameras

Not finding what you are looking for?
Casio EXILIM ZOOM EX-Z850 Digital Camera Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Casio Cameras Experts

kakima

Level 3 Expert

98792 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Fred Block
Fred Block

Level 2 Expert

289 Answers

Are you a Casio Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...