Question about Bosch 24 in. SGS43E02 Exxcel Built-In Dishwasher

1 Answer

Bosch Dishwasher SGS43E02 Exxcel Control/Display Facia Panel

The display /control facia panel has cracked and distorted on my SGS43Eo2 dishwasher. It is possible for me to purchase a replacement panel from Bosch, but how do I remove the old panel from the machine and fit the new one?

Posted by on

  • leapy May 04, 2009

    exactly the same as above - I have ordered a replacement fascia but have no idea how to remove and replace. I have tried undoing the screws around the rim of the door edge but no sign of how to remove the fascia afterwards.

    all advice appreciated. Does anyone know where I can obtain a service manual? I have tried Bosch but they just want to steer us to using an expensive service engineer.

    thanks


×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 430 Answers

The panel is replaceable by removing the #20 torx screws inside the door. Once removed the metal outer door cover will slide down and the plastic top housing less switch panel can be unclipped from two locking tabs on either side. You can order via BOSCH service center, check to see if it is warrantied before removing

Posted on Sep 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Install panel facia on bosch dishwasher


You should be able to google your model number and get step by step details.

Jan 28, 2013 | Bosch Dishwashers

1 Answer

Loose door handle


Here is the link to the installation manual; http://www.bshextranet.com/files/techtoolbox/SHV46C13-SHX43Cii.pdf pages 14 and 9 of the manual (16 and 11 of the pdf) describe how to remove the toe panel, and the door facia panel. You should then be able to access where the handle is attached. Hope this helps :)

Jul 15, 2007 | Bosch SHV46C03 Built-in Dishwasher

1 Answer

Bosch exxcel dishwasher SGS43EO2 not heating water.r



Hi,
Check your heating element..


A bad heating element causes many problems in dishwashers...

Dishwasher Problems The Heating Element not Working


How to Replace the Dishwasher Heating Element


Dishwasher Maintenance

heatman101

Asker

Apr 20, 2011 | Bosch 24 in. SGS43E02 Exxcel Built-In...

1 Answer

How do you remove the front facia door of a Teknik integral dishwasher


I have just replaced the facia on mine. It is a TKD795/4 so I would imagine yours would be very similar. Around the inside of the door are 10 starhead screws; 4 along the top and 3 down each side. On mine it is the 2 end screws along the top and the 2 middle screws down the sides that hold the facia on. It is best to remove one screw at a time to establish which ones hold the facia on and which hold the door together. The short screws hold the door together and should be replaced and left in place. It is the longer screws that hold the facia on; these only need to be undone enough to release the facia panel. Once you have undone the relevant screws, the facia will lift up enabling you to release the 2 clips at the bottom. Replacement is reverse of removal. Hope this helps.

Feb 26, 2011 | Tecnik 24 in. TKD795/3 Built-in Dishwasher

1 Answer

SGS43E02 dishwasher is blowing the fuse but I can't get into it to see what might be the problem, how do I remove the top and side panels to gain access.


You normally have to remove the back panel to gain access to the other panels. The order is usually, the back panel first, then the top panel and then the side panels. The top panel may be held in place by two screws and then slides backwards to come off.

Feb 06, 2011 | Bosch 24 in. SGS43E02 Exxcel Built-In...

1 Answer

My new bosch axxis washer was20160uc does not start


Open the dishwasher door if the desired cycle does not perform as selected on the control panel. Press the main power switch "Off" and then "On" again. Select a cycle, press the appropriate button, press "Start" and close the door. Make sure the door is closed completely.

Check the circuit breaker and water supply if the dishwasher does not start after selecting the appropriate cycle on the control panel and shutting the door.

Turn "Off" the dishwasher and disconnect the dishwasher from the power supply if an error code between "E01" and "E30" appears on the digital display. Reconnect and turn the dishwasher "On." This should reset the control panel.

Terminate a program on the control panel by holding the "A" button and pressing "Start" at the same time. The display will read "0:01". Close the door to start the program sequence. The display will read "0:00" when finished.

Oct 15, 2010 | Dishwashers

1 Answer

Can i get a replacement switch for a bosch exxcel sgs45eogb56 also can you buy a new front panel .the panel that covers the control buttons , thanks


There is a wqebsite called www.appliacneart.com that makes many different options for your dishwasher replacement panels. I know they have black, white, and stainless, but they also have a ton of other options like fireplaces, and paintings. Check them out it would probably be your best bet.

Dec 02, 2009 | Bosch 24 in. SGS47E02 Exxcel Free-standing...

1 Answer

Bosch Dishwasher Problem


if you remove the front panel (the 6 torx screws) and the facia panel you can access the control module. remove the module and open it up to see if you have a burn mark from the solder melting. if you do then you know to replace the control module

Nov 26, 2008 | Bosch 24 in. SHU53 Built-in Dishwasher

Not finding what you are looking for?
Bosch 24 in. SGS43E02 Exxcel Built-In Dishwasher Logo

Related Topics:

1,804 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Dishwashers Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

prem mathew

Level 3 Expert

662 Answers

bosch5

Level 2 Expert

157 Answers

Are you a Bosch Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...