Question about Belkin (F5D7231-4) Wireless Router

1 Answer

Belkin Universal Wireless Extender Set-Up Problems

I'm unable to get my Belkin Wireless Universal Extender to successfully connect, find and boost my wireless connection. Upon set-up I successfully "synched" the unit to my router's IP address using the "Auto" button, but as soon as I move the extender 5 feet away from the router, it's unable to "re-find" the signal, and "boost" it! It worked beautifully when the router was on the other side of my house -- placed the extender mid-way in the house, 3 rooms away from the router! But now, I can't get the extender to re-find the signal after synching it to the router -- in the same room! Help! I've reset and unplugged the extender multiple times, and successfully synched it to the router using the Auto button multiple times. Thank you!

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 66 Answers

Have you tried restarting and resetting the router as well ?

Posted on May 15, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

How to connect my laptop wirelessly to the belkin router?


You may want to click to wireless network icon on the bottom part on the rght part of your monitor and search for network. Then you may want to chose your network and, if you chosed this option, to type the password for the network.
Let me know if you were successful in solving your problem

Mar 01, 2011 | Belkin Computers & Internet

1 Answer

How do you set up a password


All Belkin Router's ship without an admin password. If you require an admin password then follow the below instructions.

Setup steps:

  1. Connect the computer to one of the four LAN ports on the router.
  2. Open a web browser on the computer.
  3. In the address bar of the web browser, type http://192.168.2.1
  4. Click Login in the upper right-hand corner of the page. The router does not ship with a password, so just click Submit.
    login.jpg
  5. Click on System Settings under Utilities on the left-hand side of the opened page.
    systemsettings.jpg
  6. You will see a feature called, "Administrator Password". Type in your current password (default leave blank).
    .adminpwd.jpg
  7. Click "Apply Changes". Your new password is now active.

Note: Do not forget the new password and keep it somewhere safe. If you forget your password, you'll be unable to access your router's settings. If you forget or lose your password, you'll need to "Perform a hardware reset on the router". This will reset the password to its default, as well as erase any and all other settings you may have changed.

Feb 27, 2011 | Belkin Surf N300 Wireless Router...

1 Answer

Trying to set up in wireless range extender mode a Belkin Wireless G Universal Range Extender. Once moved to another room away from routers and PC, the red 'searching' light continues to flash. Thoughts...


HI ....
I got Your issue....the searching light is blinking because its searching for a network ...tried scan and connect once connected will become stable...any issues let me know back

Thank u
Priya

Jul 10, 2010 | Belkin Wireless G Universal Range...

1 Answer

I have just installed a BT N mode Hub, and my Belkin Wireless G Universal Range Extender is now not working. Help please!


make sure wireless channel number should be the same on BT hub and on belkin. BT hub is normally on Auto channel change it to a channel number usually 1 and 11 are the best for coverage and then chose the same channel number in belkin.

Mar 19, 2010 | Belkin Wireless G Universal Range...

1 Answer

Use Belkin f5d7230-4 as a wireless access point


Hi Druid,

Based upon what I've read regarding and experience with the F5D7230-4 is it will only work with another F5D7230-4 or F5D7231-4, F5D7130, F5D7132 and this are all Belkin products as well I thiink it has something to do with the WDS compliance for this specific model that's why they have clearly specified on the User Guide which devices are guaranteed to work with an F5D7230-4 that is set to AP Mode(Bridge/Repeater).

If you really want to exend the wireless coverage of your Linksys router I suggest you try the Wireless G Range expander(WRE54G v2.0/3.0 version 1.0 I do not recommend since it's somewhat challenging to configure since it has no ethernet port all the setup will be done wirelessly)

click this link for the User Guide of your Belkin router.

Aug 17, 2008 | Belkin (F5D7230-4) Router (587009)

1 Answer

Belkin f5d7132


For best results, you should connect it directly to the other router with an ethernet cable.

Jul 21, 2008 | Belkin (F5D7132) 802.11b/g Wireless Access...

Not finding what you are looking for?
Belkin (F5D7231-4) Wireless Router Logo

Related Topics:

634 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2263 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Are you a Belkin Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...