Question about Canon PIXMA MP130 All-In-One InkJet Printer

1 Answer

Preferences in another language

My sister gave me her MP130 and it works fine. the only thing is that when i try to change the preferences, everything is in japanese. is there a way to fix this. can someone help me find the language setting?! please and thank you

Posted by on

  • 2 more comments 
  • maktakalak Feb 06, 2008

    i went online to download a driver. when i installed it, everything was still in english!

  • maktakalak Feb 06, 2008

    sorry drummernick. i didnt know i rated you anything. yes i do want english, but right now everything is in japanese. it's driving me nuts b/c i can't do anything. even the pop-up for the ink levels is in japanese.

  • maktakalak Feb 06, 2008

    i tried to dl the driver and after i installed it everything was still in japanese characters. maybe if i could find out which tab has the language preference, i could play around with some settings. maybe i need to learn japanese? ha ha! thanks for your help

  • t2000friends Aug 21, 2008

    The scanning menus are in another language, I need them in English Please, How do I change the menus to English?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    MVP:

    An expert that gotĀ 5 achievements.

    Master:

    An expert who has achieved Level 3.

    Sergeant:

    An expert that hasĀ over 500 points.

  • Master
  • 440 Answers

Did uuse cd to install it can u go web site download latest drivers from cannon.com ect ? try that 1st ok thx nick

Posted on Feb 06, 2008

  • 2 more comments 
  • nick helpap
    nick helpap Feb 06, 2008

    why did u rate me bad dint this work for u ?

  • nick helpap
    nick helpap Feb 06, 2008

    oh i thought u want english what lang do u want ? then u have to go to dell.japan.com ect tehn differt lang drivers ok for your model

  • nick helpap
    nick helpap Feb 06, 2008

    ok well go cannon.com dl english one ok usa one

  • nick helpap
    nick helpap Feb 06, 2008

    ya that be hard lol it should be in japanese cheak lang setting in control panel look around when u set up the dell doesnt it say english during setup sumware u can change it

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i change the language on my hp MX308


HI,
Follow these steps to reset the language and region on the product.
  1. On the product control panel, touch Setup. The Setup menu displays.
  2. Preferences . The Preferences menu displays.
  3. From the Preferences menu, touch Set Country/Region . The Set Country/Region menu displays.
  4. From the Set Country/Region menu, touch and then slide your finger up or down on the display to scroll through the list of countries, and then touch the desired country/region. The Preferences menu displays again.
  5. From the Preferences menu, touch Set Language . The Set Language menu displays.
  6. From the Set Language menu, touch and then slide your finger up or down on the display to scroll through the list of languages, and then touch the desired language. The home screen displays in the new language.
Thanks,
HP Printer Support

Jul 14, 2014 | HP Photosmart C4280 Aio Printer

1 Answer

IMac, canon mx860, netgear router, error code 306. Things were fine for a couple of years but last week the router had to be replaced. Network signal says connected at 100% but error 306 pops up when I try...


  1. In iTunes, choose iTunes > Preferences (Mac) or Edit > Preferences (PC).
  2. Click the Advanced tab.
  3. Click the "Reset cache" button.
  4. Click OK and see if the issue is resolved.
Adjust Parental Controls in iTunes:
  1. Open iTunes.
  2. Access iTunes preferences:
    1. On a Mac: From the iTunes menu, choose Preferences.
    2. On a Windows PC: From the Edit menu, choose Preferences.
  3. Click the Parental Controls tab.
  4. Remove restrictions on Parental Controls.
visit the CBR Tech Solutions

Nov 26, 2010 | NetGear Computers & Internet

1 Answer

I am using a netgear stora network drive and whenever I try to access it remotely I get a language error code window. It says, Language Error The following error occurred: Unable to load...


You get this error if you set up through the browser window instead of the CD software. To fix change your language in the user preferences to another language, save and then change back to english.

Nov 25, 2010 | Computers & Internet

1 Answer

I have tomtom910 its in french language i need to traslate in english


You will have to check 2 settings. First one. Tap on the screen. Tap on change preferences. Tap on the arrow 3 times. You should be on page: Preferences 4 of 6 by now. Tap on change language. Tap on English US. Tap on Yes.
Second one: Tap on the screen. Tap on change preferences: Tap on the arrow once (You should be on: Preferences 2 of 6 by now. Tap on change voice. Select a voice which has English US or UK after the name (example: Lori, English US). You can also Select a voice, that has English US or UK, computer ( example: Simon, English UK, Computer), if you would like spoken street names, (provided your unit is capable of saying street names). Test and select. Go through voice preferences. Tap Done.
Note: although all units are capable of speaking instructions only some units are capable of speaking street names and the *computer* part is important for that feature to work.

Jul 04, 2010 | Tomtom ONE GPS Receiver

1 Answer

My Tomtom XL displays everything in spanish, but speaks in english. I can't find a menu to change these settings.What can I do?


You will have to check 2 settings. First one. Tap on the screen. Tap on change preferences. Tap on the arrow 3 times. You should be on page Preferences 4 of 6 by now. Tap on change language. Tap on English US. Tap on Yes.
Second one: Tap on the screen. Tap on change preferences. Tap on the arrow once (You should be on Preferences 2 of 6 by now. Tap on change voice. Select a voice which has English US after the name. Test and select. Go through voice preferences. Tap Done.

Apr 27, 2010 | Tomtom GO GPS Receiver

1 Answer

My TomTom speaks a foreign language that I do not understand, how can I change it to English (USA.)? Tried to myself with no success. Thanks JF


You will have to check 2 settings. First one. Tap on the screen Tap on change preferences Tap on the arrow 3 times You should be on page Preferences 4 of 6 by now. Tap on change language Tap on English US. Tap on Yes.
Second one Tap on the screen Tap on change preferences Tap on the arrow once (You should be on Preferences 2 of 6 by now. Tap on change voice. Select a voice which has English US after the name. Test and select Go through voice preferences Tap Done.

Apr 18, 2010 | Tomtom ONE GPS Receiver

1 Answer

I want english and my tom tom is in foreign language how do i reset?


Turn the unit on, go to change preferences, go to page 8 in preferences. you will see a button marked "change language" in the upper left row. Select it and scroll through the list to your preferred language. Select the language you want and you're done.

Jan 16, 2010 | Tomtom GO 720 GPS Receiver

1 Answer

My mac ibook 10.4.11ppc and when I change the language like from spanish to english,it always resets it to spanish


To change the language from Spanish to English, visit System Preferences / International / Language. If English is not the language at the top of the list, drag it to the top of the list. Then click the Input Menu tab and make sure that only "US English" is checked.
Sorry if you already knew that, but I have no way of knowing what you know or what you already did.
If this doesn't work, go to System Preferences / Accounts and create a new temporary user. Log out and then log in as that user. If that account comes up in Spanish, set it to English. If it goes back to Spanish, you probably ought to reinstall your OS, using Archive and Install. If the new user stays in English, you have some problems with the individual account settings in your main account. I suspect some preference file, such as ~/Library/Preferences/com.apple.systempreferences.plist, is corrupt and should be deleted (warning: deleting this file will set a lot of your user preferences back to system default). You can use the freeware application Preferential Treatment to find obviously damaged preferences, but it will not find all types of damage.

Mar 26, 2009 | Apple Computers & Internet

2 Answers

I can not get the language changed to English (USA)


You inadvertently must have changed the language while toggling voice/speech settings. You need to navigate to preferences, and then voice settings, denoted by the lips or flag icon, depending on which unit, and you can change the language from there

Jan 26, 2009 | Tomtom XL 330 Car GPS Receiver

2 Answers

Language on tomtom


You find Change Language from the Preferences menu from the main menu. You may need to switch on Show All Menu Options in order to see it. Again, this is from the Preferences menu.

Dec 09, 2007 | GPS

Not finding what you are looking for?
Canon PIXMA MP130 All-In-One InkJet Printer Logo

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

101516 Answers

old marine
old marine

Level 3 Expert

1703 Answers

Corne Viljoen

Level 2 Expert

385 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...