Question about Office Equipment & Supplies

1 Answer

Ink blobs on edges of printouts

I have an HP Color LaserJet 2500L.

On the right edge of anything I am printing there is a repeating blob of unfused ink on all of my printouts. This ink is deposited and not fused on to the paper, so it will smear. I tried cleaning out the printer, but it is still happening.

This is happening on color and b & w printouts.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 103 Answers

Dear sir,

I figured out this problem it may cause; The problem behaves strangely why only on the right section the printout is not fused. The common section I first check is the high voltage circuit causing no static properties the powder shall be fused with the drum's developer. Now, it is clear also that the cause is within the drum. Pls check drum's life by printing the machine diagnostic details to check all moving and consumables counters. Clean the drum by rotating the developer roller. Well see if there's a irregularity of powder distribution. Have a nice day.

Posted on Feb 06, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hp 3210 not printing magenta and leaving large quantities of magenta ink in printer blobs on right side of paper


defective cartridge; make sure you buy ANY cartridge from a REPUTABLE, not cheap, cartridge company.

Dec 24, 2012 | HP Photosmart 3210 Printer

1 Answer

Eiki LC-XC1 color problems


check all the optical parts around the blue lcd-panel, they might be darkened due to heat

May 07, 2012 | Eiki Office Equipment & Supplies

1 Answer

I changed the drum to my HP LJ 2500L and now ot only prints in black and white. I have triple checked it's the right drum and there are no errors showing up. What's the problem?


Print a Configuration page, if it is grayscale, you probably installed a bad drum.
Make sure that "color" mode is selected in the program you are using or the printer driver. Check and see if "grayscale is selected.
If you are printing transparencies, they ONLY print grayscale.
Go to hp.com and download the latest drivers.

Apr 05, 2011 | HP LaserJet 2500L Printer

1 Answer

Ink from smearing all over my papers


Using original cartridges won happen like this.

May 30, 2010 | Canon Pixma MP450 All-In-One InkJet...

2 Answers

I have a HP laserjet 2500L printer, when I try to find out the status of my supplies, by going to Toolbox/device/information. I get an error message "can't find server" I have uninstalled/reinstalled the...


you can print out a status page by holding down the green button untill all lights flash than let go..( this will than print out a config page showing your supplies status..

Jan 30, 2010 | HP LaserJet 2500L Printer

1 Answer

My hp 1020 laser printer always prints out these ink blobs on the pages, can someone help please? thank you


try with different tone cartridge and if its still give problem its can be problem with fusser assembly internal part which need to be serviced or replaced by service person

Nov 07, 2009 | HP LaserJet 1020 Printer

1 Answer

Will print in grayscale only not in color Vista


Find printing preferences and there will be value to change print it color or greyscale. Printer preferences can be find in control panel>printers default printer menu (right mouse on default printer).

Jul 30, 2009 | HP Color LaserJet 2500L Laser Printer, up...

1 Answer

Ink blobs on paper


It could be both. Leaky ink can be a problem and that probly is the problem. But, make sure your rollers are clean and cheak that your ink is not leaking. I hope this has helped you.
DigicalJAI

May 19, 2009 | HP Photosmart C4280 Aio Printer

2 Answers

Printing graphics


Is it outside the normal printing area? It seems strange-Could there be something stuck in the machine over there? or an ink blob on the paper roller?

Aug 15, 2008 | HP LaserJet 1020 Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

481 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

100340 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

66563 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...