Question about Motorola Mobility RAZR V3

2 Answers

Screen goes away, and just whites out.

My screen whites out. Sometimes after pushing a button ,or after opening it. Help!! Need a fix .

Posted by on

  • 4 more comments 
  • YoHo315 Feb 05, 2008

    i have the same exact comment. i have no idea what is going on. now it wont even let me see ANything on my screen, yet i can still hear when i get new texts (meaning i cant read them...grrr) and i can hear when my phone rings, and answer i just cant see who is calling or anything...errrr

  • jozie_ozie Feb 05, 2008

    I have the same problem!



    Originally my front screen would start blanking out, and repeating the screen.



    Today, I turned on my phone and it is completely blank- front and main screen.

    If I wait for the screen to go black and I push a button, that screen comes up for about 4 seconds, discoloured, and then it goes back to being blank white.



    I got my razr last September.

    Does anybody have suggestions to fix this problem?

  • virgodan Feb 27, 2008

    mine (i got used) was dropped alot and a corner of the phone looks like it is scratched. there is no display but the entire phone lights up but no display. help"????

  • snchz6 Jun 18, 2008

    My screen goes white and sometimes works. I can't take it anymore!! Sometimes when I shut the phone off and turn it on again the screen will work. But for the last 3 days it hasn't worked not even when I shut ot off.

    HELP!!!!!

  • Anonymous Jun 19, 2008

    the screen seemed to be fading away one day and the next day it went totally black. It's so irritating to here text messages coming through but I can't read them!!!!

  • YoHo315 May 11, 2010

    exactly!!!!! i didnt know there was a sticker on the back!!

    i got mine in october....this sucks lol

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 29 Answers

Ok i tried this but it didnt work for me but you can go ahead and try. But find the area between the camera lense and volume button and use ur first finger and thumb to squeeze the area. (seriously mad and frustrated) I tried this and it didnt work but im guessing you can try. If not you can be like me peeved off and sad. lol thanks

Posted on Jul 07, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Grrr! me too!

Posted on Apr 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Half a white screen


check the bank button on remote if you have one this will do that sometimes keep pushing till it gos away

Oct 21, 2012 | Coby TF-TV3217 32 in. LCD TV

2 Answers

The screen went white after/when I pressed the shutter button on my G11... sometimes it's ok, then it goes white again. What's wrong?


This is most often a problem with either the main board, the lcd screen or a connection between the two. If you need help with that one, the place that you can have it serviced is: www.camerasandparts.com All they deal with are the service for the Canon Powershot cameras. Not expensive at all and the work through them is superb. Hopefully that helps get you in the right direction with it. Good luck

Mar 19, 2012 | Canon PowerShot G11 Digital Camera

1 Answer

How do you change (where is it) the drum in the Okifax 5650?


rwhen you replace the toner youare putting it in the drum cartridge.the whole black unit gets replaced.lift it up to remove.when you replace it also install a new toner cartridge the drum resevoir will be empty when
new it will need a new toner cart. to fill it now you need to reset the drum counter.push select function
button,to the right number 8 or 9 says counter display
push it,screen will will say drum count reset? push yes arrow screen will say are you sure? push yes
tada! if it now says replace toner open the white cover
over the drum then reclose it a motor will run for about 30 seconds its adding the new toner to the
resevoir you may need to do this about 3 times or until add toner message goes away

Apr 20, 2010 | OKIFAX 5650 Plain Paper LED Fax

1 Answer

Blank white screen when opening or closing


try doing a reset settings or master reset on the phone, since this is a device issue if it doesnt work then you will need to get a replacement phone thru your provider

Mar 14, 2010 | Samsung Propel A767 Cell Phone

1 Answer

Samsung laptop, white screen appears!!


You may have loose screen interface connector on the back of the screen or on the mother board.
Check out www.insidemylaptop.com

Oct 28, 2009 | HP Pavilion w2408h 24 in. LCD TV

3 Answers

Canon IR 400


i have canon ir405 cpier it dispays error code E243 please help me sir

Jun 01, 2009 | Office Equipment & Supplies

2 Answers

LG Rumor White Screen


The flex cable that connects the two pieces that make up the phone are worn out or disconnected inside. you need to open it up and check it out. Go to http://www.youtube.com/watch?v=hNaCfrqqnd0

Apr 11, 2009 | LG RUMOR Cellular Phone

2 Answers

My acer aspire 3050 screen goes white?


the ribbon cable from the lcd to the motherboard may be loose
each time you open and close the lid,it may tug on it a bit
you would have to open the screen part to get inback of the lcd

Jan 27, 2009 | Acer TravelMate 2300 Notebook

3 Answers

White screen on Motorola RAZR


I use to work for Cingular Wireless and this happened often. Try opening and closing the handset a little forcefully. It should re-seat the screen onto the contacts. If that doesnt help, have it replaced since its new. Best of Luck.

Sep 05, 2007 | Motorola Mobility RAZR V3c Cellular Phone

2 Answers

Help needed urgently


Well it ewill need to go back toKodak to be rectified. But if it still takes pictures - live with it. Tthe cost of repair will be well on the way to a new camera

Jun 05, 2006 | Kodak EasyShare DX4530 Digital Camera

Not finding what you are looking for?
Motorola Mobility RAZR V3 Logo

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Mobility Cell Phones Experts

D. E. Hev

Level 3 Expert

1132 Answers

Lawrence Oravetz

Level 3 Expert

7928 Answers

Are you a Motorola Mobility Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...