Question about Sanyo DS27930 27" TV

1 Answer

No video everything is plugged in but there is sound but no video. i put it on all the videos and nothing happenes. what could i do?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

No channels above number 13

Posted on Apr 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am trying to install ROKU video streamer into my Sharp TV model 27KS300. Roku says to plug their red/yellow/white RCA cable into the video in ports on your TV. I do this but nothing happens. I am...


Yes these are the same yellow white and red ports that you would use to connect your DVD player. I believe this television has one port in the front and one in the back. I might be wrong but I believe video 1 is in the back and video 2 is in the front. If you have tried video 1 and video 2 making sure you have pressed the video/input button to select the proper one after connecting your Roku then you have done everything properly. Make sure to try a different RCA cable to make sure it is not the cable that is causing the problem. Also try the Roku on a different television because if it is working on a different television with the same RCA cable then you'll know that it isn't compatible with this particular television.

Apr 13, 2011 | Sharp 27K-S300 27" TV

3 Answers

When I hook my dvd player up using the red white and yellow cords, the sound will come in but not the video but I have no remote. Please please please help!


The yellow must go to the video and the sound L&R to the audio inputs. If there is no video after selection of the AV, then it is possible that the input video amplifier is faulty. If there is a second AV2 port then use it or else you might need a modulator to connecct vis the RF input.
Other wise the set must be opened to check for failure off the video amp, protection diode at the input.

Sep 21, 2010 | Orion1934 19" TV

2 Answers

Hooking up a dvd player


If the three cables are yellow, white, and red, then the red doesn't need to be plugged in. The yellow is for the video signal, the white is for one sound signal, and the red is just for a second sound signal (not necessarily important). Everything will work fine if the red cable isn't plugged in at all.

Apr 01, 2010 | Emerson SpongeBob SquarePants TV

1 Answer

RCA F31671SE Turns on nothing else.


Do you have sound with the blank screen? Some RCA sets had a screwy design problem where an s-video signal wouldn't show up unless you had a cable plugged into the normal video connector as well, so you might give that a try (that is, plug in both regular and s-video cables from the source, then select the s-video input). The broken-off cable connector is repairable (replacement connectors are available) but it means soldering both large and small connections in tight spots, so it might be worth calling a service technician if you are planning to keep the set.

Nov 09, 2008 | Standard (CRT) Televisions

1 Answer

Whenever I plug my Nintendo Wii into my TV, I put the channel on aux and I get sound but no video...


I THINK SOMETHING ELSE HAPPEN BUT YOU COULD OF DAMAGED THE VIDEO CONNECTOR AND THEY CAN BE FIXED FOR AROUND 45.00 DOLLARS



THANKS DOCTOR VIDEO

Mar 24, 2008 | Orion1934 19" TV

1 Answer

Dvd hookup


  • First make sure the audio (red &black) and video (yellow) are plugged into their respective color matching inputs on the TV monitor.
  • Second either using the TV remote contol or TV's builtin control panel set the tuner mode to video. Depends on which TV's input terminal you connect the DVD player; that's where the Video mode has to be assigned.
  • For example: if you connect them to video1, set the tuner to video1. changing the channels up or down will never set it to video mode. You must press video button to change the tuner from regular channel mode to video mode.
Goodluck!

Feb 16, 2008 | Standard (CRT) Televisions

1 Answer

Composite video inputs roll vertically


Sync seperator problem, sounds like. Could be bad cable, but I rather doubt it....accordianman

Jan 31, 2008 | Samsung PCK5315RX TV

1 Answer

No picture


gets white horizontal streaks for a split second, then back to no picture. i think sound will be alright. while horizontal streaks are called retace lines & is due to video section failure. please call skilled tech to fix it it is not a major problem & can be rectified. at your place without replacing much parts. your tube is ok. good luck

Sep 27, 2007 | Zenith SY2551S TV

1 Answer

DVD VHS recorder


It sounds like your cables are connceted ok, but what you neede to do is to be able the switch from one video mode to the other so lets go through the cable and vrc conncetions again just to make sure. From your cable set top box connect your component video (RGB) video out to your TV (RGB) video in via the (RGB)cables. From your VCR connect your composite video (yellow) out to your TV composite video in withe the composite video (yellow) cable. From your VCR (Left & Right audio out)connect your left and right audio connections (White and Red) to the Audio in of the TV (Left and Right). Whith this setup you should be able to use the TV to switch between the two A/V inputs using the remote control.

Sep 03, 2007 | Philips Magnavox 27MS343S 27" TV

1 Answer

No sound or Picture, Just a hissing sound.


well what sounds like happened is you blew up the tube in it. have you unplugged it from the wall and just let it sit some times that helps because what will happen is there will be a Electrical build up and it won't work right. an other thing you might want to do is hit the Degauss button on the remote. plug some sort of video signal into it and go through the inputs to see if that helps, mine did that every thing would just be black but i plug in my video camera it would detect it and make sure that the audio cables are plugged in these TV might just be that old that they have to have both audio and video in order to work.

Nov 27, 2006 | NetTV DTV34XF3 34" TV

Not finding what you are looking for?
Sanyo DS27930 27" TV Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68223 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Sanyo Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...