Question about Samsung TXM3096WHF 30" TV

1 Answer

Vertical problem, tv set has app. 2" black bar at top of picture with thin horizontal line through black area,bottom of pic is off screen. I changed the vertical ic and a diode and three caps in circuit to no avail. hav any encountered this problem

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 30 Answers

Chek tje vertical deflection yoke winding and the socket. readjust the vertical height control.hope this will help.

Posted on Feb 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What can be done to repair picture to my TV


Vertical scan output section circuit should be checked. Contact any service technician.

Aug 30, 2014 | Toshiba CF32H40 32" TV

1 Answer

I have white horizontal lines about 2 inches at top of my tv


You have some bad grounds on the Vertical IC. In addition to this, in the immediate area of this Vertical IC, are a few bad capacitors. Look for this IC mounted on a large heatsink. It may have seven pins . I cannot remember for sure. I have not worked on this particular TV, so I cannot give you specific locations. But I assure the problem is in this area! If you have some electrical experience you can pull this board out. In this case only the caps need replaced and the IC resoldered. Good Luck and thank you for asking. If you have anymore questions, visit me...Thanks Again! Your south of the border tech!

Apr 27, 2010 | Toshiba 32A14 TV

1 Answer

Only thin white line across my toshiba tv


This is an easy repair if you've ever soldered and would not be too costly for a repair shop to do it for you. The problem is a bad Vertical Output IC (usually mounted on an aluminum heat sink with the part on it labeled LA78?? ) and 1 or 2 bad capacitors. Some times you can even fix the problem by re-soldering the contacts of the IC- To find the IC follow the 4 wires that come from the Yoke (which is a contained coil of wires slipped over the neck of the picture tube(s)) back to the board. 2 of the wires go to the horizontal o/p and 2 to the Vertical o/p the thinner gauge wires are for the vertical.

Sep 28, 2009 | Toshiba 36A50 36" TV

1 Answer

Screen is black with a thin horizontal line


Change the vertical IC and check the electrolitic capacitors near them

Aug 28, 2009 | Televison & Video

1 Answer

Sony KV-27FS200 bright horizontal line problem


try to replace all filter capacitor on vertical section area that can solve your problem. 

Mar 07, 2009 | Sony FD Trinitron WEGA KV-27FS200 27" TV

3 Answers

Horizontal white lines across top of TV screen


Hi I had the same problem. Broken white lines across the top of the screen. This is called overscan. You need to go into the Setup menu, other settings. 16:9 overscan needs to be on. Hope this helps.It solved our problem.

Sep 15, 2008 | Panasonic CT-2006S 20" TV

1 Answer

Mitsubishi CS-27205 shrunken picture


Good set...worth repairing vertical circuit.....in shop...
about 100.00........................T.

Nov 15, 2007 | Mitsubishi CS-27205 TV

1 Answer

Top half of screen black


The vertical circuit is going bad,this is the one in charge of opening the picture up and down,try taping on the side to see if the picture reacts ,if it does your set has a loose conection and the vertical IC will need to be resoldered only but if it does not react the IC will have to be replaced,if you are familiar with tv service this will give you a place to start but if you are not be safe and seek the help of a servicer,please let Us know how it goes.

Oct 11, 2006 | Sony KV-XA34M66 34" TV

1 Answer

Screen split with black bar through center, top of picture shows in bottom


It sounds as you desribe, the vertical output IC and or the b+ feed capacitor off the Hi voltage transformer feeding the vert. IC its required voltage. Not a really hard job to replace, but not for a handi person to do. This should be left to the professional, as there are no user serviceable parts inside this set and with the HI voltage and the safety issues its best to call somesone to assist you with this repair. Good Luck

Jun 14, 2006 | Sanyo DS31520 31" TV

Not finding what you are looking for?
Samsung TXM3096WHF 30" TV Logo

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69955 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

cce772000

Level 1 Expert

7 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...