Gaggia Titanium blocks on display screen

Question edited for clarity.
Question moved from Washing Machines.

First try a power reset. Cut main power by removing the mains plug for 10 minutes.

Gaggia Titanium - Rinsing cycle never ends.. - MrBean2Cup

https://service.mrbean2cup.co.uk > answer > Rinsing-cy...
If you have filled up the water tank at least 5-8 times and the machine still has not finished the rinsing cycle then it has a water flow meter or CPU issue. I ...
Missing: continuously ‎' Must include: continuously

Gaggia Titanium/troubleshooting - Whole Latte Love Support ...

https://wiki.wholelattelove.com > Gaggia_Titanium > tr...
Jul 19, 2019 - There are two separate rinsing cycles on this machine. There is a short rinse cycle that occurs when the machine is starting up, but there is ...
‎Flow Issues · ‎Brew Unit Blocked Or Stuck · ‎No Beans, Grinder Blocked, Or...

Rinsing; Function Programming - Gaggia TITANIUM Espresso ...

https://www.manualslib.com > manual > Gaggia-Titaniu...
Gaggia TITANIUM Espresso Machine Manual Online: rinsing, Function Programming. ... If the descaling cycle is interrupted by switching the.

A nice coffee maker. So, please could you tell us what is your question?
Maybe some operating instruccions?
Check support library:
Or do you want to repair something?


Gaggia TITANIUM Espresso Machine Operating Instructions Manual

GAGGIA

Gaggia Titanium Super Automatic Espresso Machine

Cleaning Gaggia Titanium Espresso Machine Gaggia Titanium Steam Valve Replacement

either the grind is too fine or the brew unit is blocked.

Either the grind is too fine or the brew unit is blocked at the screen.

Try cleaning and relubing the brew unit.
If that fails you require a new main board.

This normally indicates due to the grinder being set too fine or oily beans being used.
Try setting the grind on 7 .
If it still fails the grinder will need to be unblocked and serviced.

When you said cleaned it out did you remove the grinder burr gears,vacum out the coffee shute and the coffee dump solenoid?
I do this then put it back together,set the grind on 7 and normally all is good.

Hold down the descale button for 5 seconds its the double ellipse, that should put it in a clean cycle. It is possible that it needs cleaning and it locked up because it was not getting cleaned.

Remove brew unit, If you have the key that came with the machine use it to remove the shower screens and check for blockage.

Try first to continue filling up the water resovoir (UP TO FOUR times) to see if the machine completes the rinse cycle on its own. If that doesn't work contact Gaggia Customer Service in the US at 888-389-4123. Sally there was VERY helpful and should be able to resolve your problem.