Question about Flat Panel Televisions

2 Answers

Can't advance channels with remote

Use comcast - Remote suddenly won't advance to next recognized channel when you try to change channels a "no input selection available"

What the heck ???

Posted by on

  • 2 more comments 
  • Anonymous Nov 16, 2008

    I have the same inquiry. Why can't this TV work without cable box

  • NaliniParikh Nov 16, 2008

    Why can't the Sharp Acquos work without a cable box? I tried connecting my cable wire directly to the TV (bypassing the box) and I don't get a picture. Why is this? Can these TVs work without an actualy cable box.

  • farmerwoody Dec 07, 2008

    I can't get a picture. When I change channels I get the message:
    No input selection available.
    I followed the above suggestion without success.
    Is  it the TV or my satellite?
    Help!
    KB

  • rs363 Jan 28, 2009

    So? What about guys who connect cable right to tv? I tried "restart-reconnect" option! It doesnt work!!!!

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Hey Guys and Gals I have the solution to your problem. Your channel memory on the remote has been forgotten. Simply navigate through your menu on the remote and rediscover the channels and your issue should be solved. I had the same issue it just took me a little time to figure it out.

BTW if you are hooking up your TV with a direct cable connection in the back without a box, and you go to the menu and do a search for air/cable channels it will even find the channels in between the regular broadcast stations (i.e. between 2 and 3 there is 2.1. which is channel 2 HD and so on for the regular stations that broadcast HD channels). Cheers and good luck the Sharp Aquos is an awesome TV!

Regards,

Jeff the Sofa King :)

Posted on Jan 29, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 261 Answers

UNPLUG cable settop box and reset...Then go from there. Let me know and good luck.. GURU JAY

Posted on Feb 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tv setup - cannot get past auto channel


Connect the TV to the Comcast box using an HDMI cable, then set input on the TV to HDMI - that's all. You then select channels on the Comcast box , not the TV (although the TV remote can be programmed to change channels on the cable box)>

Jan 27, 2014 | Element Flat Panel Televisions

1 Answer

Olevia channel setup


With the remote of dish you will control the dish box. The tv control is only necesary to set the signal on channel 3 or Aux to get the signal from the dish box.

Now Your main remote will be dish remote control. Set your tv on channel 3, then turn on the dish box, and use normally.

Oct 02, 2008 | Olevia LT26HVX 26 in. LCD Television

1 Answer

My Comcast Proscan HD TV has a small screen on non HD channels.


I have 2 pro scans Comcast hd. On Comcast remote small button ( for me Its small circular button bottom right) HD ZOOM. (enter above it)

Aug 30, 2012 | Flat Panel Televisions

1 Answer

Can't change channels expect by inputing numbers


Try to reload the the remote by using the universal remote code for comcast cable.This number should be available in your owners manual or on the Sharp website. You should search the websites frequently asked questions and troubleshooting sections for you model of television to see if someone already has had the problem answered. If all this fails you must contact the customer service for both the remote and television and get help. Hope this helps you with your problem.

Apr 08, 2009 | Sharp Aquos LC-45GD4U 45 in. LCD HDTV

1 Answer

Remote Codes for new Sony Bravia


you should press 10000, which is the code

Mar 06, 2009 | Sony Bravia KDL-40W4100 40 in. LCD HDTV

1 Answer

LG TV renote not worknf on 4 new sets


Hello,

If you have a cable box (otherwise known as a set-top-box) that you have to turn on when you turn the tv on, and you use to change your cable channels, the LG remote will not control it. The LG remote is strictly for the tuner built into the television, and is not capable of controlling the cable box.

You probably see "function not available" because you are viewing the picture on an external input of the tv (component, composite, etc). Your tv cannot tune stations in when it is set to an external input that you use to watch DVD's, cable boxes, games, and other devices. The tv is telling you that you can't change channels if it is on an input.

I hope this helps you...

Jan 20, 2009 | LG Flat Panel Televisions

1 Answer

Figuring out the TV channels for Comcast using the Sharp remote


Unfortunately there is no listing. I suggest taking a little time to sit next to the television with an notepad to go through each channel one at a time to label what stations come in on what channel numbers. Sorry.

Jan 09, 2009 | Sharp LC46SB54U 46 in. LCD TV

1 Answer

I can't get comcast remote to work with tv


Try insignia's website (http://www.insignia-products.com/universalcontrolcodes.aspx). They have codes for all of their equipment.

t.

May 26, 2008 | Insignia LCDTV26 26 in. Television

Not finding what you are looking for?
Flat Panel Televisions Logo

Related Topics:

326 people viewed this question

Ask a Question

Usually answered in minutes!

Top Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

68157 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...