Our lemarx x9350 all in one printer is only a few months old. It worked just fine before now we are having a few proplems with it. It will print off the computer and a fax. It will not scan, fax, and copy. Please give us a solution we would be so greatful.Thanks, Lisa
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
hmmm this s the prb in u r printer settings...u jus give a print test after fixing the new cartridges...then if it works then there no prb in cartridges...or else there s dust in the printing rod...u jus want to giv the printer for service so that they will clean the motor of the printer and u r printer s set for working...cool!!!!
I logged into Lexmark's web site and checked their printer support page. It said that if you get error message 1203 your ink cartridge has leaked fluid. In order to find the right cartridge, do the following. Remove both ink cartridges, put in one, turn off the printer, turn it back on and if you get the message 1203 that's the cartridge with the problem. I did not get that message. I turned off the printer, put in the other cartridge, and turned it back on. Sure enough, I got the 1203 message again. (I had cleaned the wrong cartridge before). I removed the leaky cartridge, cleaneded it (making sure I did not leave any residue) and put it back in the printer. It worked!
Hi, have you had any luck repairing this? I also had this problem. I rang Lexmark support who, after 45min on phone, decided to send me a new machine. They did not want the old one back so I intend to try and repair it when I have time. I reckon the x9350 are prone to scan head problems as mine was making strange noises before it packed up and I have seen other reports of problems on various forums.
I am currently having the same problem with a 17" iMac Intel Core Duo. The printer worked fine for a few months, now it will only print in black and white and sometimes in color that is extremely faded. I have tried every troubleshooting tip in the book and still no luck.
It's NOT a cartridge if this works... I had a similar problem with a 9600 I bought on eBay that had been inoperable over 18 months. Three colors would NOT clear up after multiple power cleanings. Epson support politely solved the issue at no charge on the phone... he had me drop a few drops of warm water on the pad the printhead rests on when not printing. You have to move the printhead to the left to do that by moving up the little lever near the cutter. The pad is easier to reach with a long eye dropper. I used very warm water- not boiling. I replaced the printhead over the warm water pad for an hour. Then I repeated the process and let it be for another 60 minutes. Then I did a nozzle check and what was gummed up yellow, cyan, and magenta nozzles became clear and it's worked fine since. Good luck!