Question about Samsung HTQ45 System
long reading time for cds or dvds only means that there might be dust or residues hindering your cd lens to accurately read the data of the cd/dvd. what you can do is try to clean the lens with a cd cleaner.always check the cd/dvd that you insert are clean and fre of dust . if this still wont work and the player still have the long time to read the cd/dvds, my advise is to bring this to a service center and have this checked out.
hope this helps.
Posted on Feb 05, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
May 06, 2012 | Samsung Audio Players & Recorders
No disc error can be a DIY like the following steps.
Assuming that the disc is good.
1.Cleaning the lens. - Sometimes because of dust filled up the lens
can't read any disc.
Try clean the lens by soft cotton
buds. Be careful while doing this.
2.Replacing the ribbon - Check the ribbon connected to the
lens from the main board for scratch,
damage. Once it has an open line then of course the lens can't read the disc.
Also try to erase the contact by pencil eraser.
If you've done the steps above and the symptoms still there
then the next step requires you a little knowledge in soldering technique and
reading the ohmmeter.
3.Checked the motor - Check the motor that spin the disc
with an ohmmeter. You can test it using the ohmmeter (x1) even it is connected
on the lens assembly.
Good motor - reading should be
fairly high and it will spin.
Bad motor - reading will drop to low resistance and
will not spin.
Hint : 50% of my repaired unit the
above parts are commonly caused of the problem.
If you confirmed that you have a
defective motor then replace it with a new one. Before replacing the new motor
you have to check the clearance of the disc holder with the old one. The
clearance should be the same as the old because if not the lens will not read
the disc if it is too far or too close.
If you already
cleaned the lens, and confirmed that the ribbon is good as well as the motor
then I've advice you to send it to repair shop because the next step should be
done with an expert because it is quite technical diagnosing the fault between
the pick-up lens and the main board.
Hope it may help you.
Thanks for using fixya.
Feb 01, 2011 | Samsung 1000W 5.1-Ch. Home Theater System...
Apr 23, 2010 | Samsung HT-Q70T System
Dec 03, 2008 | Bose (321GS) System
Feb 04, 2008 | Samsung HTQ45 System
Jul 30, 2007 | Samsung HTQ45 System
Mar 28, 2007 | Samsung HTQ45 System
164 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: