Question about Audio Shelf Systems

2 Answers

Jvc model mx-c33 home stereo

Working great until I moved it into the garage[in summer], now will not play cd's. I get "no disc" on display as it searches through all six in the magazine and also the single tray. thanks for your help

Posted by on

2 Answers

I moved it to the garage, placed it on top of refrigerator, reset time, stations. I didnt play a cd right away. When I did, one played fine and that was it. No is wasent dropped, but I wonder if putting on the metal refrigerator somehow misaligned the laser to read cd's. thanks for your interest, Rick
[I must add though, when I brought it back into the house, it picked up and played a cd. I then went to play one of the other 5 discs and the same problem occured.

Posted on Feb 10, 2008

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 44 Answers

Did this problem start as soon as you moved it or did it take a couple of weeks? also did it get dropped during the move?

Posted on Feb 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My jvc mx c33 will not play cd's that I burn, plays store bought ones fine. I am using Roxio NXT Pro to make my cd's on to a .cda format. The jvc mx c33 doesn't recognize the disk, just says there is


Are you closing the disc? If so are you using CRD or CRDW. If you are using CDRW it will not burn in the proper output format. If you use CDR only it should. Also try recording at a slower speed. It has helped me in the past to do so.
A great program to try is CDBurnerXP, and it's free. After you record it then put it back in and run it again, but this time just select "Disc" then from the drop down menu Disc Information [CTRL+I] and read what format you ended up with. Remove that and check a store bought disc and compare.

CDBurnerXP Free CD and DVD burning software

Dec 03, 2014 | JVC Audio Shelf Systems

1 Answer

Cd inserted in cd player no disc


The problem is in the laser pickup assembly, overtime the laser becomes weak until it will no longer read the disc, it is far cheaper to replace the stereo than have the old unit repaired.

May 01, 2012 | JVC MX-GT80 Shelf System

1 Answer

Jvc stereo model mx-kc4 cd tray won't open make loud noise


sounds like theres something keeping it jammed in might be one of those pull hard and hope jobs :) good luck

Mar 24, 2012 | JVC MXKC4 360-Watt Compact Component Audio...

1 Answer

My jvc home stereo won;t play


It is the fuse, or the power transformer that in some cases has a built in thermal fuse in place of the regular fuse.

Mar 10, 2012 | JVC MX-GA77 CD Shelf System

1 Answer

I just purchased a used JVC MX-C33 stereo and the FM radio is ot working. Do I need to have apecial antenna or other gadget to get the radio to work? DO not have the manual. Thanks


I have a used JVC MX-C33 and put the cartridge in with only one cd and only one tray in the cartridge. Now it wont eject nor will the single slot open. Any suggestions on how to open it? Thanks, Monte

Apr 28, 2010 | Audio Shelf Systems

1 Answer

The stereo works fine but i cannot eject the cd's


I just had the same problem with the same model. Disc five was saying no disc and would not play any other discs. I opened the radio and found the the CD tray was missing a piece for disc five. You have to put the disc tray back into the holder to fix it. Make sure it locks in place and you should be able to get the rest to work.

Feb 11, 2010 | JVC HX-D77 Shelf System

1 Answer

MY STEREO IS DISPLAYING UPGRADE DISK


my cd player is reading no disc on all disc players it is a 5 disc holder

Jan 06, 2009 | JVC MX-GA77 CD Shelf System

1 Answer

JVC MX-C33 Tape Drive Problem


there are small rubber belts that drive the tape spindle that makes the tape play! Over time these stretch and become loose and make the tapes play slowly and even shut down (replace belts and it should be fine) these belts are located in back of tape spindel and are about two inches long!
Please rate my answer and keep this site FREE!

Dec 31, 2008 | JVC MX-J30 CD Shelf System

2 Answers

Error message No Disc


Unit has bad disk t-table motor

May 06, 2008 | JVC MX-J200 CD Shelf System

2 Answers

CDs won't play


Maybe you should fix the cds or clean them or try to fix the disc reader in the radio.

Nov 09, 2007 | JVC MX-KB30 CD Shelf System

Not finding what you are looking for?
Audio Shelf Systems Logo

Related Topics:

635 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Shelf Systems Experts

The Knight
The Knight

Level 3 Expert

68323 Answers

 Grubhead
Grubhead

Level 3 Expert

4590 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you an Audio Shelf System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...