Wipro sound n display drive is needed..pentium iv processor

The groth of pentium pro
Terry

the prcessory varies with clock speed and the speed for example a pentium 1 processor has a spped of 100mmx with aclock speed just 66mhz now the pentium 4 processor uses a spped of 3.0 ghz with a clock speed of 800mhz so there is deferance as the clock speed increase the speed of the computer increases

System Requirements

• Recommended Hardware Requirements for Tally 9
• Pentium 4 and above or equivalent
• 256 MB RAM
• Minimum Disk Space: 40 MB
• Operating System Software: Microsoft Windows 98/ME/NT/2000/XP

Hence, your system would definately support Tally.

Hope it helps! Good Luck!
CreativeTECH

All your answers in once convenient page:
http://en.wikipedia.org/wiki/List_of_Intel_Pentium_microprocessors

Hello
I did some research into your motherboard for that dell and found that it uses the Intel 865G motherboard. Which uses Intel Pentium IV Socket 478 proccessors.
Any Socket 478 Pentium IV processor will work in that board. the best processor I could find for that was the Pentium IV 3.4Ghz but it was $231..
However, I did find the Pentium IV 3.2Ghz for only $15.99. that seems to be the best deal to me. That would be a fair speed increase, an extra 0.6Ghz or 600Mhz.
Here is the link: http://www.geeks.com/details.asp?InvtId=P43200478&cm_mmc=GoogleProducts-_-CPUs/Processors-_-Socket478(Pentium4)-_-P43200478&utm_source=GoogleProducts&utm_medium=ShoppingSites&utm_campaign=P43200478

Also if you need to get a new heat sync you can search for "Pentium IV Heatsync" or "Socket 478 Heatsync" in google or a sight like newegg.com
Enjoy!

Hello,

Go to www.intel.com to download drivers for them.

its speed increses in a particular rato.Its grow in each month in a aspect ratio.

check the mother board processor socket number first, if you find a processor that is compatible to it then you can definitely upgrade it!

From what you posted, your processor uses socket 478. You could pop it into any of these micro atx boards

http://www.newegg.com/Product/Product.aspx?Item=N82E16813130178

Hi, For Dimension 3000 system here are your options. Pentium IV 3.2 GHz 533 / 800 MHz FSB Pentium IV 3.0 GHZ 533 / 800 MHz FSB Pentium IV 2.8 GHz 533 / 800 MHz FSB but what i'm worried about is the socket where the process goes into. for thermal issues it is expected for the socket to CHIP CREEP. Chip creep refers to the problem of chips that, over time, would work their way out of the socket. Chip creep occurred due to thermal expansion; the contracting and expanding during system heat up and cool down. you might end up replacing the mobo as well.