Question about Kodak EASYSHARE 5500 All-In-One InkJet Printer

1 Answer

Printer will not communicate with computers

My HP PSC 1510 does not communicate with my computer at all. I've tried multiple USB cables. The printer turns on, the copier works fine but when I plug in the USB, nothing happens. I have reinstalled the software and drivers. I uninstalled everything and plugged in the USB, trying multiple ports and the computer does not respond at all. I have tried this printer on 2 different PC's and I am currently trying to use it on a Macbook. Same result with every computer. It's the printer.. I believe in the hardware. It worked fine about 3 months ago but I haven't used it in a while and now it does not work. When the software looks for the USB, it claims "No devices found." I've used all USB's with other hardware and they work just fine. Is there a rest button or something on the printer? Thanks so much! my hp psc printer does not respond to the computer every time i try to connect th eusb cable..it says gound new hardware ani a small box appears and tries to install the software but later it say that the hardware dint could not be installed as it din find any software i dint used the printer for 1 yr and now when i use it says such problem i hav tried downloading the software many times but also its not working

Posted by on

  • Anonymous Mar 28, 2008

    Lexmark printer will not communicate with my computer. I need help with this. Thanks

  • jsifuentez2 Apr 18, 2008

    I have a Lexmark Z23 Inkjet printer that will not communicate with the computer. I have reloaded the drivers but still nothing. I even purchased a new USB cable thinking the prongs were bent but it still will not communicate with the computer. What should i try next?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 30 Answers

Whenever I have seen this problem it has usually turned out to be one of the solder points on the USB connection in the printer. Of course it could be a logic board problem as well. Well done for testing your problem so thoroughly (eg trying different cables and machines) but I think it needs a repair agent now unless it is under warranty (or you can solder well). Mind you it's probably cheaper to purchase a new one then to pay to have it repaired.

Posted on Feb 06, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Printer will not communicate with computers


Top three suspects
1. Printer data cable 2. Network not setup 3. Need to reinstall printer

Jan 31, 2011 | HP PSC 1510 All-In-One InkJet Printer

1 Answer

I need a windows cd to download a hp 1510 printer I don't have acd to download to the computer I need assistance to get it downloaded


go to HP.com on another computer and save it to a USB flash drive. you can then install it on that computer from the flash drive.

Aug 11, 2010 | HP PSC 1510 All-In-One InkJet Printer

1 Answer

No scan with imac


Make sure that the hardware is functioning correctly.

Restart the product and the computer

Manually check the USB connection between the product and the computer

Make sure that the USB cable is connected correctly to the product

Test the USB connections and restart the computer

The USB cable is connected to a USB hub or a docking station for a laptop
or Desktop.

Fully uninstall and reinstall the HP software

Use the MSCONFIG utility to enable the Startup software
Try the scan again
If the scan is successful, the issue is resolved.

Aug 09, 2009 | HP PSC 1510 All-In-One InkJet Printer

1 Answer

I can scan, BUT I can't print. HP PSC 1500 windows 7


Go to control panel and check the printer status, Unplug the USB cable than right click on printer icon and click on delete. Once you do that make sure printer icon should be gone. Than restart the computer. Once computer is Up than connect the USB cable of printer and make sure while doing that , the printer should be powered on. After that printer icon will again reappear in contro panel.

Try printing, it should work

Jul 22, 2009 | HP PSC 1510 All-In-One InkJet Printer

1 Answer

Using multiple HP printer models with same Windows XP laptop


I doubt there is a universal driver , however you could connect directly to your pc or via a router and share it over your home /business network, and access it them that way

Feb 13, 2009 | HP Office Equipment & Supplies

1 Answer

I have a hp psc 1410v all in one i cannot get it to communucate with my computer


Go to control panel - printer and faxes and check if the printer is listed or not. Make sure the printer is set as default printer. Try different USB port and lastly uninstall and reinstall the printer.

Thanks

Jan 20, 2009 | HP PSC 1510 All-In-One InkJet Printer

1 Answer

Lost software.. download available?


Click software and driver downloads on the page below and follow instructions:

HP PSC 1510 All-in-One Printer

Dec 11, 2008 | HP PSC 1510 All-In-One InkJet Printer

2 Answers

Hp psc 1510 all in one printer


xax! as it seems u have tested a lot of thinks! :)
well, listen first of all if u have the cd of the VISTA instaligation pack u shoulld install it from there,
after that, u can tru to unplug the usb cable from ur computer so it has no conection att all, and when it says to plug ur printer, plug first into the printer and THEN into ur pc...(this is quite critical)
more over, do not be mad with the setup soft cause as it seems its not the best :S
e.g. ive instaled it 4 time to my pc cause i got an error in every step!!!


dont forget to vote!!!
Stratos

Nov 27, 2007 | HP PSC 1510 All-In-One InkJet Printer

1 Answer

My computer (PowerMac G4) doesn't communicate with my printer


Get an add-in USB PCI card.  My peripherals work on my G4.  These PCI cards will have 2.0 speed.

Nov 20, 2007 | HP PSC 750 All-In-One InkJet Printer

Not finding what you are looking for?
Kodak EASYSHARE 5500 All-In-One InkJet Printer Logo

314 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Michel Smith

Level 3 Expert

1218 Answers

Sajid Najmi
Sajid Najmi

Level 1 Expert

31 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...