Question about Atari 2600 Console

2 Answers

Atari 2600 Console Power Adapter

We have just purchased Atari 2600 Console without an adapter.
What power adapter is required volts/amps?

Posted by on

  • frezthl Dec 17, 2008

    i need an adapter too, my original died

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 231 Answers

This place sells replacement adapter (not original) for the Atari 2600.

http://atariace.com/atari/accessories.php

Posted on Dec 24, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 121 Answers

Hi.. here is a link to get you the adapter you need..
https://ssl.perfora.net/electricquarter.com/atari-2600-adapter-plug-p-44.html?osCsid=69b65dc1dbf7bd905201004572e261e4

hope this helps.. thanks.. d

Posted on Feb 22, 2008

1 Suggested Answer

  • 18 Answers

SOURCE: Atari 2600 Console Power Adapter

The Atari 2600 adapter has the following information on it:

Input: 120V AC 60Hz 12W

Output: 9V DC 500mA

Positive tip


Make sure you test the power supply before you use it. I have 2 original atari power supplies, and they are both putting out about 15V DC, which may be why my atari's aren't working anymore!

Anubis

Posted on Jun 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My son just got a atari 2600 console but it will not power up swap the 9 volt and still not power up


Well put it this way yes it a power system failure to fix this problem you basiclly will have to install a new mother board for the console from another atari 2600 console like from ebay. If you find a crappy atari 2600 console with a working motherboard you might just be able to switch it and I fix NES SNES N64 sega gamecube and atari 2600 consoles too. This has a high probility of not working if you don't know what to do or on how to fix it. 8 out of 10 it might not work after this.

Aug 21, 2011 | Atari 2600 Console

2 Answers

Own Atari 2600. Atari not responding to television. (FUZZY SCREEN) One of three problems: 1. I AM NOT CONNECTING SYSTEM CORRECTLY TO TV. please instruct me how. parts i have are: Radio...


Hello!

When powering the stuff there should be light indicated that there is a power on it. how ever if these not been observed, power adapter maybe busted. try to fix it or replace it. Please refer to the atari manual for the correct operation of your stuff.

hpe this help,
melnavz


Mar 14, 2008 | Video Game Consoles

1 Answer

How do i tellif my atari get power without the tv


Well you could just plug the console and only the ac adapter into an outlit then.

Aug 10, 2011 | Atari 2600 Console

1 Answer

Tried connecting direct to both an LCD and older set using the coaxial lead straight from the console.Cannot get anything at all.Do I need an rf modulator or no.


Quite the opposite - The Atari 2600 sends a modulated RF signal over the cable, it needs to go to the ANTENNA port of the TV, and you need an adapter. On eBay, look for
ATARI 2600 RF TV SHIELDED CABLE + ADAPTER
http://www.atariage.com/howto/connect.html is a really good guide.

Nov 26, 2010 | Atari 2600 Console

2 Answers

Does not power on anymore


Well It might be the ac adapter thats doing this so you could buy a new adapter to see if it works again usually Nintendo sega and atari consoles will work with a new ac adapter then.

Jan 17, 2010 | Atari 2600 Console

2 Answers

Atari 2600 Console Power Adapter


The Atari 2600 adapter has the following information on it:

Input: 120V AC 60Hz 12W

Output: 9V DC 500mA

Positive tip


Make sure you test the power supply before you use it. I have 2 original atari power supplies, and they are both putting out about 15V DC, which may be why my atari's aren't working anymore!

Anubis

Jan 05, 2009 | Atari 2600 Console

1 Answer

Atari 2600 junior problems


Press up on the power switch to reset the machine. Then try powering down. If that fails, accumulated dirt or general usage may be preventing the on/off slider from sliding fully to the off position. If you want to hurt your baby, take it apart - you will find the obstruction in the casing (could be as simple as a ball of lint). I wouldn't reccomend it however - the Atari 2600 was always touchy, and this is not as big of a deal as it might seem. Just unplug after every use.

Sep 14, 2008 | Atari 2600 Console

1 Answer

2600 atari


To connect your Atari to your TV, you'll need to get a "phono to f" adapter. These are available at RadioShack (part no. 278-255) for about $5.00 This adapter takes the phono plug from the Atari and changes it to a standard coaxial adapter. If your HD TV doesn't have an input for standard cable wires, you'll need to get yourself an RF modulator to switch the coax to RCA. If you have an old VCR with an unused cable input, that will work as well.

Mar 28, 2008 | Atari 2600 Console

Not finding what you are looking for?
Atari 2600 Console Logo

Related Topics:

454 people viewed this question

Ask a Question

Usually answered in minutes!

Top Atari Video Game Consoles Experts

Iron
Iron

Level 3 Expert

3018 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

WTF Chuck.....
WTF Chuck.....

Level 3 Expert

378 Answers

Are you an Atari Video Game Console Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...