Question about RCA DRD430RG DirecTV DTV Receiver

1 Answer

Remote control code to program for directv receiver

Am looking for assistance in programming my Toshiba CT90157 remote in working with my satellite channels. It turns off an on my TV, but can not get it back to work with my directv channels. Any help would be greatly appreciated. Toshiba CT-90275 remote needs Directtv receiver code to program the receiver. What is this code?

Posted by on

  • 6 more comments 
  • ANNABELLEA Feb 14, 2008

    I got a Toshiba Ragza 26LV47 with a remote CT-90275. I am trying to control my directv box to function with my new tv remote, I looked all over for codes but the manual for the toshiba states that is a 3 digit code I have tried all the codes for the box but no luck my box is either D10 o D11

  • Anonymous Mar 01, 2008

    I have the same problem. The Directv receiver I have is D12-300

  • wannabfree Jun 11, 2008

    I have the same problem. I cannot control my DIRECTV receiver with my Toshiba remote.



    My Directv receiver is a HD H21-100



    Thank You

  • noslenvidal Jun 27, 2008

    Same problem here. Remote model is Toshiba CT-90236. Receiver is H21-100



    Remote expects 4 digits code & receiver expects 5 digits (00001, 00002 & 00003)

  • danios56 Aug 07, 2008

    I have the TOSHIBA ct-90275 and cannot program it for my directv.Can anyone help me?

  • saeedalajami Oct 28, 2008

    i need the code for Starsat SR-X130D plus receiver to connect that to my universal remote :((((((((((((

  • jmcd0264 May 11, 2010

    I have an RCA DRD430RG directv receiver with a toshiba ct-9946 remote. How do I pair them up?

    Thanks.

  • Anonymous Mar 17, 2014

    Just bought a Bush DVRHS02 Combined DVD recorder and VCR, no remote control so struggling to get it to work as the manual talks about controls on Remote., also there is a green tint on screen when playing a DVD or VHS, any suggestions would be greatly appreciated

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Filmmaker:

    Uploaded 5 video answers.

  • Expert
  • 152 Answers

I have a ton of codes i need your model# of your Directtv Receiver.

Posted on Feb 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need rca crk17sa users guide for codes for Magnavox TV


Ok it took me a while. Go to this link to find the codes for you remote: 10054 is the most used code for Magnavox. I hope this helps you out. Good Luck!!!!!!!
http://www.directv.com/DTVAPP/content/remote_codes

Here's how to program your DIRECTV remote control:
  1. Press MENU on remote.
  2. Select "Parental, Favs and Setup"
  3. Select "System Setup"
  4. Select "Remote"
  5. Select "Program Remote"
While aiming remote at device, follow onscreen instructions to program remote to TV, DVD, or other device.


How to program the white DIRECTV remote to your TV
  1. Look up the control codes for your DIRECTV remote control.
  2. Make sure your TV is turned on.
  3. Slide the mode switch at top of remote to "TV".
  4. Press and hold the MUTE button. This is located above the number 1 button.
  5. While still holding down MUTE, press and hold the SELECT button until the green light at the top of the remote flashes twice.
  6. Enter the first TV code you have. The green light on remote should flash twice.
  7. Aim remote at TV and press PWR button once. The TV should power off.
  8. Once the TV is able to power off/on and control the volume, slide the mode switch at the top of the remote back to the left (DIRECTV). Your remote is now programmed.
If the TV does not power off, repeat steps 4, 5, 6 and 7, using the next code for your TV brand.
If remote control fails to program using all available codes, try scanning for the code.


How to scan for TV codes on your DIRECTV remote
  1. Make sure your TV is turned on.
  2. Slide the mode switch at top of remote to "TV".
  3. Press and hold the MUTE button. This is located above the number 1 button.
  4. While still holding down MUTE, press and hold the SELECT button until green light at the top of the remote flashes twice.
  5. Then enter 991, the green light on remote should flash twice.
  6. Point remote at TV and press CHANNEL UP button. Tap the CHANNEL UP button repeatedly until the TV powers off.
  7. When the TV powers off, press and release the SELECT button.
Note: If the green light flashes three times before TV responds, then all codes have been cycled through. Our remote controls are guaranteed to program to your DIRECTV receiver, however your TV may not be compatible with our remote control.

Mar 08, 2010 | TV Receivers & DVRs

2 Answers

Can't program rc65 directv remote to control hr21-700 receiver


I believe the codes 00001 and 00002 are valid for all DirectTV receivers.

Instructions for entering the codes are here.
Instructions for searching for the proper code if those two don't work, or for other devices, are here.
If you'd like a digital manual for your RC65, click here.

I hope that helps.

Jan 25, 2010 | Directv HR21-700 DTV Receiver

1 Answer

Direct receiver is not responding to remote


if you go to: http://www.directv.com/DTVAPP/global/contentPageIF.jsp?assetId=P4380052#h:1020.450


it has different remote codes. you would have to select "satellite setop box" also you need the model # of the receiver which can be found (normally) behind a door on the front panel of the receiver on a sticker (where the access card and reset button are) if its not a directv receiver, (hughes, etc) then it would probably be on the back of the receiver you would see a sticker with the model # of this receiver.

the first code should be 00001 follow the instructions on how to program on that website.

Apr 19, 2009 | Directv Plus DVR DTV Receiver / 100-Hours...

1 Answer

Universal remote control CODE for starsat receiver 150D


i have star sat remote sr x5100 plus. i want code to buy a new remote control

Apr 09, 2009 | RCA DRD430RG DirecTV DTV Receiver

1 Answer

How do I program a Directv remote witha Samsung Directv receiver


http://www.directv.com/DTVAPP/global/contentPageIF.jsp?assetId=P4380052#h:1020.989


there is the website, put in the name of the receiver as Samsung and make sure you are under "SATELLITE SET TOP BOX" and follow the instructions on programming. hope this helps!

Mar 30, 2009 | Samsung SIR-S300W DirecTV DTV Receiver

1 Answer

Need to program a directv philips series 2 remote


tivo button is the Directv button (tivo home) at the top of the remote. if u have the new directv remote, the tivo home button is the menu button. remote needs to be on satellite. to program codes.

Dec 20, 2008 | Philips DSR708R DirecTV / TiVo DTV...

1 Answer

Toshiba dr-2 and directv hd sat rcvr hr22


Check the manual to see if there is an automatic code search feature for your Toshiba. It may be easier to program your directv remote to operate your toshiba. You may not get the full use from either remote, but its worth a shot

Dec 01, 2008 | Arris DCT2608

1 Answer

Remote for DirecTV wont control my Toshiba VCR/DVD combo unit


Its true sorry but there isnt any codes available for combos.

Feb 19, 2008 | Directv D10 DTV Receiver

1 Answer

Remote control code


Those 2 remotes are not compatible with the newer directv receivers

Feb 09, 2008 | Directv D10 DTV Receiver

Not finding what you are looking for?
RCA DRD430RG DirecTV DTV Receiver Logo

4,702 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA TV Receivers & DVRs Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

Mike Nick

Level 1 Expert

3 Answers

Tony

Level 3 Expert

2598 Answers

Are you a RCA TV Receiver and DVR Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...