Question about Kenwood KDC-MP4028 CD Player

1 Answer

Wiring mishap with kenwood cd player

The wires are a mess, dont know which wires go where, pls give me a colour guide on where to plug the correct wires together. Thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi,

For wiring your Kenwood KDC-MP4028, please refer to the below wiring/color guide:
Red - Ignition/Accessory B+12VDC
Black - chassis/GND
Blue/White - external amplifier
Blue - motorized antenna
Brown - mobile phone mute sensor
White - Front Left +
White/Black - Front Left -
Gray - Front Right +
Gray/Black - Front Right -
Green - Rear Left +
Green/Black - Rear Left -
Purple - Rear Right +
Purple/Black - Rear Right -

Hope this be of help. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Posted on Feb 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hooking up kenwood cd player in a 2000 silverado but the wires aren't labeled coming out of the cd player. Pls help


If you use a wire harness adapter, you just have to match the colors from the Kenwood plug to the wires in the adapter. No guesswork.

Kenwood uses the CEA standard for car audio wiring:

Yellow: 12VDC constant power
Red: 12VDC key-switched power
Black: Ground
Orange/White: Illumination
Blue/White: Remote output for amp turn-on
Blue: Power antenna activation

White: Left front speaker (+)
Gray: Right front speaker (+)
Green: Left rear speaker (+)
Violet: Right rear speaker (+)

Each wire with a black stripe is a negative speaker output.

You can download owners' manuals from Kenwood's web site.

http://manual.kenwood.com/en_contents/search

Jul 16, 2015 | Kenwood Car Audio Receivers

1 Answer

IM TRYING TO MAKE MY OWN HARNESS FOR A KENWOOD KDC-MP5032 AND I DONT KNOW WHICH WIRE GOES WHERE. PLEASE SEND ME ANY INFO YOU CAN. THANK YOU FOR YOUR TIME!


the usual colours are:
  • black - ground
  • blue - power ant
  • blue/white - remote power on
  • yellow - +12v
  • red - accessory
  • orange - illumination
  • white - left front
  • gray - right front
  • green - left rear
  • purple - right rear
on the speaker ones the colours with a black strip are usually the negative -

hope ths helps

Sep 21, 2010 | Kenwood KDC-MP5032 CD Player

1 Answer

I cant figure out one of the wires on my kenwood car stereo


Hi, red = ingnition power black = ground yellow = constant +12v blue = remote. There should be 8 wires bunched 4 colours & 4 same colours with white stripes. These you will have to experiment with your cars wiring. This is just a eneral rule for most stereo wiring.
Hope it helps.

Wayne

http://techrehab.t35.com

Aug 10, 2010 | Kenwood KDC-MP435U CD Player

2 Answers

Need a wiring diagram please


wiring diagram or colour code for kenwood cd player model kdc-5108

Nov 16, 2009 | Kenwood KDC-W3534A CD Player

1 Answer

CD player wont come on was doing weird things


You have your accessory wire (red wire) and remote ran together and the yellow (constant wire ran separately in the dash?

You need the red wire to so you can use accessory and to turn off your cd player when your vehicle turns off.

You need the yellow wire to keep all your settings stored. base/treble/time clock

Just a little clarification. Your amp turns on with the remote wire (blue) wire, if that is not hooked up you will get no power to the amp.

Here's the in-dash diagram to your vehicle at the bottom of this pdf.

http://www.installdr.com/Harnesses/Ford-Wiring.pdf

You want to focus on N,O, and P

Do you happen to have an after market wiring harness? These can be bought from walmart for your vehicle. You just take the male end connect the colors together and plug end that goes to your cd player into the female end. Very easy to do.

Windshield wiper issue: http://www.allfordmustangs.com/forums/attachments/4-6l-tech/32492d1188791176-2003-mustang-fuse-box-diagram-2003-enginefuseblock01.pdf Check C1002, 1003, and 1004 under your hood.

You could also have one of these fuses out under your hood, that might cause you to lose power to everything.

http://www.allfordmustangs.com/forums/attachments/4-6l-tech/32493d1188791176-2003-mustang-fuse-box-diagram-2003-enginefuseblock02.pdf

Let me know if you need more assistance =)

Feb 01, 2009 | Kenwood KDC-MP238 CD Player

1 Answer

Trying to wire up my cd player


Check for shorts in the speaker wiring. Clip one end of a mult-meter to the ground of the car chassis, then probe each speaker wire. Did you install it? What car, did you buy the wire harness for the car, or did you hard wire it? I know pretty much ALL american made wire colors by heart, and most foreign ones too. (Het, 51 years old and doing it sinc 1980!!! So, let me know if I can help further. If YOu installed it, it may be possible that the wiring is messed up. Hit me back.

Larry T
WinonaLake, IN
http://www.cybersoundsaudio.com/cybersounds/vehiclepics.html

Jan 27, 2009 | Kenwood KDC-MP4032 CD Player

1 Answer

Wiring diagram for cd player


that actually is not for a head set, tha tis for a remote, you plug in the remote that you can buy from an audio store and mount it on the dash....

Nov 26, 2008 | Clarion DB175MP CD Player

1 Answer

Wiring for a kenwood kdc 1020 cd player


if you have the wire connector it's easy.....give the negative conection to the body of the player..find the wire from the battery with has the power supply even when the switch is off..and connect it to the yellow wire.that is for the memory...find the wire which has the power when the switch is on ,and connect it to the red wire from the player....what i mean by switch is the ignition switch... u can easily find the speaker connections...most speaker wires comes as blue,ash,green,white...there are two wires from each colour......

Nov 21, 2008 | Kenwood KDC-MP235 CD Player

2 Answers

Wiring diagram of audio for EF falcon


Since you did not list a specific vehicle make or model.

I usually find all of the wiring diagrams HERE.





Best of Luck.

Please RATE my solution BELOW.

Nov 24, 2007 | Kenwood KDC-MP208 Car CD/ MP3 Player

Not finding what you are looking for?
Kenwood KDC-MP4028 CD Player Logo

Related Topics:

265 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio Receivers Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Pablo Gonzalez

Level 3 Expert

733 Answers

Are you a Kenwood Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...