Question about Network & Wireless Adapters

1 Answer

WIRELESS PCI 54M G NETWORK LAN ADAPTER CARD 802.11 b/g INSTALLATION

I HAVE 3 COMPUTERS IN HOME.
OK-DOWNSTAIRS I HAVE A WIRELESS BELKIN G ROUNTER HOOKED UP TO MAIN DESKTOP. AND A WIRELESS SET UP ON A LAPTOP.

UPSTAIRS I JUST INSTALLED A NEW WIRELESS PCI 54M G NETWORK LAN ADAPTER CARD 802.11 b/g INTO MY OLDER COMPUTER-WINDOWS 2000 PROF. DEVICE MANAGER SAYS IT IS OK. BUT IT IS NOT WORKING. CAN YOU HELP ME CHECK SETTINGS?

OH WE HAVE BROADBAND.

Posted by on

  • chancesss Feb 05, 2008

    the main computer hooked up to wireless router and the network card in the laptop is working fine-i just need help with the desktop.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    MVP:

    An expert that gotĀ 5 achievements.

    Master:

    An expert who has achieved Level 3.

    Sergeant:

    An expert that hasĀ over 500 points.

  • Master
  • 440 Answers

Try to unplug it all modem roughter then modem roughter computer on see if its working do repair also thx nick

Posted on Feb 05, 2008

  • nick helpap
    nick helpap Feb 05, 2008

    also reset button on back of router k

  • nick helpap
    nick helpap Feb 05, 2008

    ya still do that tho

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I installed a Belkin broadcast router and my computer won't hook up to internet. My other computers (like the one I'm relaying this message) does fine. Downloaded D-link 520 drivers to a...


Go to my computer control panel network connections and see if the setup for networking is correct DHCP should work most of the time. Check the device manager and see if your nic is properly recognized. If not you might need to install drivers for the card.

mycomputer - control panel

mycomputer - view system information - hardware - device manager

Also, sign onto your router and see if the router recognizes the computer.

It should tell you how to do this in the routers manual.

May 09, 2011 | D-Link DWL-520 Wireless PCI Wi-Fi...

1 Answer

Bought a G Wireless USB Network Adapter, on install when it asks to plug it in the computer cant find it, then I get a error message that I need to instal the network card


To configure the wireless router, it needs to be connected to a computer with a LAN cable. Therefore the computer needs a LAN card and the LAN card driver installed and if you need to connect a laptop or computer to the router by wireless then the laptop or computer needs a wireless card plus the wireless card driver.
To configure the wireless router and wireless cards in the laptop or computer, please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security

Mar 06, 2010 | Belkin Network & Wireless Adapters

1 Answer

Connection wireless adapter to laptop dell


Open up PC, Plug it wireless network into a PCI slot, turn on PC, the network device will be recognized and ask for drivers, you insert the CD/DVD that came with it, or use the software you downloaded from Belkin web site and install the WiFi card.. Run the Belkin software and it is installed. reboot PC, put case side back on.

Mar 02, 2010 | Belkin (F5D7000) 802.11g/b Wireless...

1 Answer

My network adapter " broadcom 802.11n newtwork adapter" is experiencing driver or hardware related issues


I think it needs dusting. do the following:
1.Open your computers cabinet and plug out the LAN card from the PCI slot.
2 Clean the PCI slot and LAN with brush
3. Insert it again in some other PCI slot if your motherboard have .
4. Install the drivers after the windows found the hardware.
Hope it work.

Jul 14, 2009 | HP Broadcom 5751 (DZ556A) Network Adapter

1 Answer

Ralink wireless lan card not exist


You have to remove the PCI card or USB from the computer, uninstall the software. Reboot, now install the software. Power off computer. Install network card or USB, then power on computer.

The key is that you have to install software before installing hardware.

May 27, 2009 | Adapters.com BT-0333 Bluetooth USB Adapter...

1 Answer

Do i have a lan card installed on my system??


Just check it in the device manager ,, goto device manager by right clicking on my computer... if u have network adapters then u have LAN ... and if u have lan u don need drivers it will be inbuilt ...

Nov 30, 2007 | Compaq 2Mbps Wireless LAN PCI Card for...

1 Answer

Do i have a lan Card on my system??


just try to check if there is an RJ45 port at the back of ur system, then check if the drive is installed. on your desktop, right click on the "my computer icon" then select manage and then select device manager. on device manager expand the network adapters. there u can check if the driver of the lan card is installed on your system.

Nov 30, 2007 | Compaq 2Mbps Wireless LAN PCI Card for...

Not finding what you are looking for?
Network & Wireless Adapters Logo

Related Topics:

993 people viewed this question

Ask a Question

Usually answered in minutes!

Top Network & Wireless Adapters Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Justin
Justin

Level 3 Expert

2072 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Network and Wireless Adapter Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...