Question about Hotpoint Washing Machines

2 Answers

HOW CAN I GET MY HOTPOINT AQUARIUS 1400 - OFF CONSTANT TEST PROGRAM?

HOTPOINT AQUARIUS SUPER SILENT 1400 -
MACHINE IS SET TO WASH PROGRAM BUT DISPLAY IS SHOWING "TEST" AND THE MACHINE IS CONSTANTLY GOING THROUGH A TEST PROGRAM.
DOES ANYBODY KNOW WHY THIS SHOULD HAPPEN?

Posted by on

  • 1 more comment 
  • Anonymous Mar 17, 2014

    trip goes every time machine is turned on

  • Anonymous Mar 19, 2014

    Heater not working

  • Anonymous Mar 23, 2014

    no power lights

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

This works

To exit the TEST mode, press and hold down the "Start/Cancel" button until ALL of the console lights light up. Press both "Start/Cancel" and On/Off buttons simultaneously until " dOFF " appears in the display. The default setting will now appear and the machine can be used normally.

Posted on Feb 07, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

I tried that too and it works. Holding down the start and cancel button together for a bit works too.

Posted on Jan 25, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Aquarius wf620 super silent washer has "test" in


  • to de- activate press and hold the start/cancel button untill all the lights come on.
  • then press and hold the on/off and start/cancel buttons together until d-off appears
that should do it and if not get back to me, there is another way you can do it.

Jul 11, 2011 | Hotpoint Aquarius WF220 Front Load Washer

1 Answer

My hotpoint qasher/dryer aquarinus super silent wd640 1400 spin just says test on displays and does not let me wash :(


Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} According to the manual ‘TEST’ should only appear in the display when the hardware key is inserted into the rear socket of the machine ready to commence a test sequence. The only advice I can give is to turn the appliance off and remove the plug from the power socket for at least one minute then plug it back in and try it again. These machines have 3 phase motors and the heat sink on the module retains an electric charge for some time after the appliance has been switched off so be mindful if you decide to venture into the inside of the cabinet.

Jul 06, 2009 | Hotpoint Aquarius WD640 Front Load...

1 Answer

Wd640 stuck on test


hold both buttons in until dsiplay clears

Jan 27, 2009 | Hotpoint Aquarius WD640 Front Load...

1 Answer

My hotpoint ultima super silent displays 'test' but dnt run cycle


its in factory test mode, this can be set by pressing the on and start buttons together. to reset, turn on while pressing the on and start together until dOFF appears

Jan 25, 2009 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Testing Shows On Display


press and hold start/cancel button for 5 secs. Thenpress on /offbutton and start/cancel together until Doff is displayed the machine should now be ok

Nov 26, 2008 | Hotpoint Aquarius WF000 Front Load Washer

2 Answers

Aquarise + super silent WF 630 1300 spin


to removed test display press and hold start/cancel button for 5 secs. then press on/off and start/cancel together until d-off is displayed then machine will work

Oct 27, 2008 | Hotpoint Aquarius WD640 Front Load...

2 Answers

Hotpoint WT965 ultima fault code F05


I have a ultima WMD940 won't drain and comes up code F05. Please can you help my washing is piling up

Aug 27, 2008 | Washing Machines

1 Answer

Hotpoint Aquarius super silent


Try pressing the "on" and "start" button together for over 5 seconds..............or till the display vanishes. You will tell me the result...............vote too.

Mar 17, 2008 | Hotpoint Aquarius WF210 Front Load Washer

3 Answers

Hotpoint supersilent washing machine


Try pushing the "on" & "start" buttons together for 5 secs or more. If it does not clear from the display, switch of the machine for 5 mins and try again.

It would be nice if you rate me, thanks.

Dec 26, 2007 | Hotpoint Aquarius WD640 Front Load...

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

300 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

hungoverrr

Level 1 Expert

5 Answers

puggy666

Level 1 Expert

47 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...