Cant see the sound icon, no mixer balancer, no voice..

Turn the sensitivity down in the sound mixer?
Right hand mouse click on the loudspeaker icon and choose recording mixer. Adjust as required.
Hope that helps.

Hello Mithmar hi, try setting the volume for your microphone, (i'm assuming you are using X P) to do this right click the speaker icon (or the mixer icon) on the lower right side of your screen, you will go to the volume controls section, goto options, then properties, select recording. check the microphone, then click apply/ok. On the mixer there is now the microphone slider. Test your microphone by loading the sound recorder program (start, all programs, accessories, entertainment, sound recorder, press the red button) then shout to the microphone, you should see wave patterns on the recorder, your microphone is working fine. at this point let me know your progress.

Hi,
Please restart the computer and check
click on start> go to control panel >click on sound and audio devices > uncheck the mute > click on voice tab> click on volume tab under voice recording check the mute option and uncheck the mute.
Still it is not working go to this site - http://www.kellys-korner-xp.com/xp_tweaks.htm
using internet explorer and run the tweak

Good Luck..

Likely the volume got turned down or muted.

Try right clicking on your speaker icon in your tray and see if the "mixer" window comes up. Check for muting and volume levels in that window for the different audio devices.

If you can't find that window, go to the SOUND icon in the control panel and find VOICE input controls.

It may be as simple as the balance controls.

You can get to these by selectin the volume control mixer and double checing that they are set to the middle

NOTE these are not the main volume control ones but the smaller slder usually at the top or bottom of the mixer display depending on the sound mixer software used.

If it is windows 7 then double click the speaker icon and select mixer
now click on the speaker icon
select levels
at the right hand side are options for BALANCE and adjust as needed

Windows XP is as follows

ouble click on the volume control from the taskbar or sound options from control panel and the balance sliders are at the top above each volume control

in your computer trey you see a red speaker icon (reltek hd adio sound output)(if cant see read downside).
doble click this icon and you see a sound setting box.
you see upside 5 option(sound effect , mixer , aodio I/O etc.)
choose MIXER and you see two option in upside PLAY BAKE and downside RECORD see upside you see option subwoofer, center line volume . front mic, mic volume and cd volume.
you see that front mic and mic volume is muted.
remove mute and enjoy
(if you cant see icon go to this address:-
My Computer C:\Program Files\Realtek\InstallShield.
in this location you see two red speaker icon.
dobble click the icon "RTHDCPL"and now you see the icon)

check for recording mixer through your volume icon

line in will be muted unmute it

You should find it in the recording option from the mixer

your pc have load sound driver ....if no install sound driver pls install driver.......

The Samson C01U records in mono, not stereo. This is why you hear sound coming only out of one (the left) channel.

Welcome to FixYa

Your Sound Panel must look just like the columns provided in red bellow:

"Volume Control"
"Balance" - Center
"Volume" - Full
"Mute All" - Not selected

"Microphone"
"Balance" - Center
"Volume" - Full
"Mute All" - Not selected

Thank you for using FixYa. Have a nice day.