Question about Samtron 76df 17" CRT Monitor

1 Answer

Repairing the cable for Samtron 76V. (PN17LTPN/XAC)

I have a male connector to attach to it. Since the one that was with the monitor, all the pins started to break. So I severed the male connector to that one years ago, I lost that after I moved. Now I am stuck with trying to figure out which wires go to which pin. Now if you know where each wire goes to each pin. I'd really enjoy the feedback. Thanks. I been trying to fix this thing for two days, and its been 5 years since I haven't again. Thank you!

Posted by on

  • HellaTruvios Feb 05, 2008

    To unlock you will need to push on the front top of the monitor. Where the line is. It's unlocked with pressure. Push forward to unhook the lock. There is two locks, to my knowledge at the least.

  • HellaTruvios Feb 05, 2008

    Thanks, I am sure this should be all the help I'll need. Thank you very much, and thank you for helping me out!

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 84 Answers

Buy the repair manual for your particular monitor. You can download them for a small fee and they will give you the needed pin out diagrams to replace this connector.

You should find them here or perhaps here.

Posted on Feb 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Missing adapter or plug in connection to 15 balance mointor model 2015


The Balance CM2015 monitor uses a VGA connector,

http://www.ebay.com/ctg/Balance-CM2015-15-LCD-Monitor-Black-/52125929

(The above is for reference only. Not advertising)

A VGA connector is also referred to as a 15-pin D-Sub connector,

http://en.wikipedia.org/wiki/VGA_connector

This is information on a DVI cable, and DVI connector,

http://en.wikipedia.org/wiki/Digital_Visual_Interface

If this is the monitor cable you have, you need this type of adapter,

http://www.directron.com/dviadapter.html

Now LOOK closely.
This adapter has male pins that stick out, and go into a female VGA connector on the monitor. The DVI side of this adapter has socket holes, for a male DVI cable.

IF, your monitor has a male VGA connector on it, and the DVI cable you have has socket holes, you need this adapter,

http://www.directron.com/dvitovga.html

If your monitor cable is not a DVI cable, post back with the style it is.
If nothing else post how many pins are in the connector on the cable, and how they are arranged.

For additional questions please post in a Comment.
Regards,
joecoolvette

May 27, 2012 | Computers & Internet

1 Answer

Need Cable Connector for VA902b monitor


Any PC repair shop should have this standard VGA DB15HD cable. Or just go online, it is just VGA CABLE 15-PIN/3-ROW male to male.

Apr 05, 2010 | ViewSonic VA902b 19" Monitor

1 Answer

Came with 2 cables for attachment - on longer type with 2 sets of pins to middle and one side and another smaller with 2 rows of pins - problem is monitor has 2 places to attach but the smaller has 3 rows...


The monitor comes with DVI and VGA (DB15HD 3-ROW HIGH DENSITY) connectors. If your PC only have VGA (DB-15HD) output for the monitor, then you need to use VGA cable (DB-15HD Male to Male) for connection. Hope I explained clearly.

Apr 01, 2010 | ViewSonic VA712B 17" Flat Panel LCD...

1 Answer

Replacing vga cable


A VGA cable is a D-Sub 15 pin cable.
Connector information:
http://en.wikipedia.org/wiki/VGA_connector

Pinning information about midway down the page:
http://myhometheater.homestead.com/vgacable.html

Is that what you were looking for?

Mar 27, 2008 | SAMTRON 55V 15" CRT Monitor

1 Answer

Cable problem


I checked your problem which you fasing. If you are not monitor specialist after than you should try one monitor specialist in local market. First you should say to engineer that mansion origional data cable in monitor.Engineer says that original data cable is not available in market.after than if engineer pressure to you regrading for 15 pin connenctor.than you should agree for 15 pin connector because if you are only one single user than this connector will carry for one year because this connector is temprary for some time.

Nov 28, 2007 | SAMTRON 55V 15" CRT Monitor

2 Answers

Samtron 78DF signal cable conductors


This is solved by the author himself

May 30, 2007 | SAMTRON 78DF 17" CRT Monitor

6 Answers

15 pin VGA connector damaged.


i want to know that what is the color combination of vaga cable connector

Aug 28, 2006 | SAMTRON 55V 15" CRT Monitor

Not finding what you are looking for?
Samtron 76df 17" CRT Monitor Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samtron Computers & Internet Experts

William Miller
William Miller

Level 3 Expert

9042 Answers

Richard Lilja
Richard Lilja

Level 3 Expert

379 Answers

Ted Maxwell

Level 3 Expert

3519 Answers

Are you a Samtron Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...