What Brand? Dell/Toshiba/Compaq
What Model Number?
Do the lights come on? BATT / Power / HD?
Does it work when conntected to a monitor?
Comments:
Feb 22, 2008
- No display could mean several things.
1st thing, Connect to an external monitor and turn on. If it displays a picture, It may be the LCD is defective - see below.
=======================================
If you see TEXT or Windows but the screen is not lighting up. Typically it is the backlight tube.
If you see NO TEXT or WINDOWS.
Then it is usually the INVERTER, or the Cable has separated on the back of the LCD, or the cable connector to the mother board is loose.
Before pressing the motherboard connector down, look inside the jack, and see if any pins are bent (on the motherboard end).
If neither of those, it may be the video output/driver chip on the mainboard, meaning it will have to be replaced.
Hope that helps
i have a compaq laptop CQ 40. the display screen is flickering continously after i have loged in ....
(More)
i have a compaq laptop CQ 40. the display screen is flickering continously after i have loged in . please help me.
I have a Dell Inspiron 8200 with a Matshita CDRW/DVD UJDA740 and it has stopped burning cds. It now...
(More)
I have a Dell Inspiron 8200 with a Matshita CDRW/DVD UJDA740 and it has stopped burning cds. It now plays them and rips music from them but and WMP 11 it says 'Connect burner and restart program'. Can anyone help????
My Toshiba satelite has done this 2 times now I was on-line and for no reason I got a blue screen...
(More)
My Toshiba satelite has done this 2 times now I was on-line and for no reason I got a blue screen and then it shut down. I tried to reboot but I get 3 lights on the key board and the power botton light up it sounds like it is thying to boot then the lights flash 4 times then powers down?
I have an A105-s4211 and the lcs screen is messing up, it'll fade out to a cloudy black screen, but...
(More)
I have an A105-s4211 and the lcs screen is messing up, it'll fade out to a cloudy black screen, but when i press on the side of the screen and the front to sort of bend the screen the picture comes back on and works perfect, but asoon as i let go, it stops working and slowly goes back to the cloud, any idea's what might be the problem?