Question about Janome 8080 Computerized Sewing Machine

1 Answer

Left prong is broke off the machine plug.

I would like information where I might buy a replacement for the power
panel on machine body to replace broken prong.

Posted by on

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Janome Master
  • 1,388 Answers

If the power inlet on the actual machine is broken, you will need to find a local Janome dealer and see if the part is still available to order, or any sewing repair shop that deals in servicing all brands may have an old one from a deceased machine that will suit you.

I am not familiar with this model in Australia, it may have come out with a different code reference here.

Phone around locally is my suggestion, we here come from all around the world.......beyond the oceans of where any of us call home !!

Posted on Apr 25, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi. My sewing machine modle 1014 just broke the balance wheel. Where can I find to buy it please??


i did a simple on line search using the information you provided. in the web search bar i typed janome sewing machines 1014 balance wheel replacement and came right to a dealer, you should try that as well. i used bing as my search engine but you can use any i am sure.

Nov 11, 2014 | Janome Sewing Machines

1 Answer

Necchi supernova julia power problem


sounds like a sew-tric plug an motor if so under the motor's electrical connection cover there is a wiring diagram moulded onto it

Feb 24, 2014 | Necchi Sewing Machines

1 Answer

M546 brother overlocker


it's possible that when the left needle broke, it could have caused a missalignment in the machine, it would be a good idea to have the machine checked.

Nov 09, 2013 | Brother Sewing Machines

1 Answer

Need to know the wiring diagram for the 3 prong plug for model 158153


Why not just buy a new plug for about $22? I am not sure what brand you have but the plugs are easy to find online.

Jan 26, 2011 | Kenmore Sewing Machines

1 Answer

Elna supermatic...the light comes on ,,but nothing else works


Turn the machine on, press the foot control down and turn the handwheel backwards. If it sputters, the motor carbon brushes are worn to the springs and need replacing.

Next, while pressing on the foot control, try wiggling the wires around where it enters to machine and where it enters the foot control. There may be a short in the cord. If the short is at the machine, you need a new cord. If it is at the foot control, the cord can be pulled into the foot control, the shorted part cut off and the connection reattached.

If it still doesn't work, try removing the cord from the machine and placing an alligator clip test lead to two of the inlet prongs on plugging it into power. Which two prongs you ask? Try several combinations, (one will light up the lamp) CAREFUL: THE MACHINE MAY SUDDENLY TAKE OFF AT FULL SPEED, SO REMOVE THE BOBBIN, THE THREAD AND NEEDLE FIRST. if it runs, it is your foot control. If it doesn't run, it's likely the motor brushes or motor.

Dec 11, 2009 | Elna Sewing Machines

3 Answers

Light dims when you sew


the problem is that the cord that was replaced on it is too light for the sewing machine. some companies sell cords that are made with 18awg wire 18awg wire can only deliver enough electricity to run the motor sapping up all of the power from the light as soon as you push the pedal. you need to get a cord made by singer or rewire your cords with 16awg wire... 16awg wire is the standard wire for all vintage singer sewing machines it keeps the light nice and bright...... hope this helps

Aug 06, 2009 | Sewing Machines

Not finding what you are looking for?
Janome 8080 Computerized Sewing Machine Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Janome Sewing Machines Experts

Bargain Box
Bargain Box

Level 3 Expert

1388 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

165 Answers

Irene Tulloch

Level 2 Expert

449 Answers

Are you a Janome Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...