Olympus stylus 790 sw:windows vista does not recognise the devise?
New Olympus dig camera (stylus 790 sw)
downloaded the cd-rom
But when i connect usb-kabel,pc (vista) doesn't recognises "the device"?
re-installed the cd-rom several times,no result,no driver
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Consider NOT connecting your camera to your computer.
The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.
Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program.
The problem is not with the cord . But it's with the computer .
I'll give a solution assuming that you are using [ Windows XP ] as an Operating system . This can also go with [ Win 7 or Win Vista ] .
1: Go to start
2: Go to all programs
3: Go to accessories .
4: Go to system tools .
5: Click on [ restore ]
Now you will see many restoring points . Try to remember which point or time the ( Olympus Stylus ) was working fine .
6: You need to restore your system to that point or time .
7: The system will restore itself to the point you chose and will reboot .
8:After rebooting plug in your Camera USB cable to try if that worked or not . It should work . If not , then the problem is with the Camera . For that you need to reset the Camera and try again .
If that didn't help , then there must be a hardware failure with the camera and it needs to be serviced .
if you go to the olympus website www.olympus.com in the download section you are able to download the software.
but if you have a multi-card reader for your laptop just use that they are a lot quicker to use