Question about Denon AVR-1602 Receiver

2 Answers

Best Way ti connect a Denon AVR-1602 Surround Sound system with a Bell Express View Satlite reciever and Plasma TV

I have The following Components;

A New 50" Plasma Samsung TV, a Denon AVR-1602 Reciever, a Bell Express-vue Satilite Reciever, CD player and DVD Player. What is the beat way to connect these for best porformance?

Posted by on

  • 2 more comments 
  • mickey71_ Apr 10, 2008

    Sorry for the delay in responding but I just got back from work. I have a 3100 Model Bell Sat. Receiver and a Zenith DVD2251C DVD Player. I am hoping to upgrade to a HD Bell Receiver (NOT the recorder Model).

  • Rob Galayda May 11, 2010


    • Need to ask a few questions:

    • which bell receiver do you have?

    • what make and model ov DVD ro you have?

    • That way I can guide you on how to hook everything up...

    Hope to hear back from you soon...Rob

  • Anonymous Mar 23, 2014

    How to connect older tv to my denon reciever to get audio sound

  • Anonymous Mar 27, 2014

    no sound when attached to a sony bravia tv

×

Ad

2 Answers

Is the sub woolfer out powered? My sub woolfer is not

Posted on Jun 25, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 54 Answers

Lets see, 3100 has no digital out, so you need analog inputs for the audio. Best picture with the 3100, use S-video. Digital input for the DVD sound and S-video in for picture. OOPS....does your TV have a S-Video input ?. If not then you have to use the RCA standard video type connector, as this particular denon doesnt do up or down conversion to or from S-video to old style RCA.

Sorry for the late response.....Rob

PS.....the HD bell wont do you any good with this receiver nbecause it doesnt have component video inputs. Enjoy Bells' superior picture with regular TV . Its way better than cable. Rob

Posted on May 09, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Visio e370vl says "not support when iplug in my Denon avr-2310ci


dont use your reciever to switch video inputs to your tv, plug player directly into tv, use coax or optical input from player to reciever for audio

Mar 23, 2013 | Denon Audio Players & Recorders

1 Answer

RE: Denon AVR 3300 - I cannot get the system setup menu to display on Phillips P50PFP5332D tv screen? All connected components work and sound great, but I cannot see Denon's Setup menu on tv to a


I understand, it's something I've misunderstood on my denon avr-790 as well when connected to a samsung 8000 series led tv.
The answer isn't in the receiver's settings (you can be on whatever source you want on the receiver end when toggling the menu). You need to toggle through the tv's sources to find the menu (usually found on hdmi 1). I've spent towards an hour recently troubleshooting only to find that it was the tv's source that wasn't set properly and I was trying to change the receiver's settings instead of the tv's source.
Hope that helps!

Jan 16, 2012 | Denon AVR-485 Receiver

1 Answer

I have a Denon AVR-1707 with a center, 2 front speakers, and surround sound back speakers. When set to FM radio, all speakers work. When set to TV, only one side speaker works. Any ideas? It worked fine...


Follow the sound back to its source. FM is internal so it can't possibly have a cabling issue.

I imagine your TV sound ultimately originates from a cable box which has a nice juicy digital output that the Denon could use. Why route audio through a TV, like the manuals tell you, when you can get it straight to the best audio device without a detour to a TV and its dubious audio electronics?

Apr 17, 2011 | Denon AVR-1707 Receiver

1 Answer

I have a denon avr-1602 and moved recently. The audio for the DVD player connected was perfectly fine before, but after making the new connections in the new place can get video, but no audio. I...


Hi matthewgk,

It's been a while since I have used my unit and it is not plugged in presently but this may work as I recall having a similar issue a couple of years ago. Try pressing the 'input mode' button on the main unit (or on the remote) to cycle through to AUTO rather than ANALOG. If you still have issues you could try cycling through the DVD remote menu (usually on screen) and selecting the input source type while AUTO is shown on the receiver.

Regards
Matt

Sep 16, 2010 | Denon AVR-1602 Receiver

1 Answer

I just purchased a . Samsung 50


No, you would be better off sending the video signal from your sources(satellite,digital cable,DVD,BluRay player,any digital HD source,etc.)directly to your Samsung TV, and then use the fiber optic output from the TV to transfer the audio signal to your Denon receiver, or another way is to send all video signal to your TV and send all audio signal to your Denon receiver seperately, keep in mind that there really isn't a good reason to send video into a Denon receiver, that processes sound not picture! Good Luck !

Jan 05, 2010 | Denon AVR-3805 Receiver

2 Answers

Just connected sky via hdmi through denon 3310 and no sound is coming through the tv. Also do i need to have amp on to view sky via hdmi?


ensure that HDMI is selected in your sky settings.

you would not need an amp at all just to view sky, only if you were routing sound to say a surround system.

Are you only getting no sound from the tv? or are you getting sound via the amp but not from the tv?

Nov 22, 2009 | Denon AVR-3805 Receiver

1 Answer

Denon avr-1908 no picture from dvd player which is a panasonic...using hdmi cable


if your not getting a picture make sure you have change you signal setting on the reciever if you have done that. and you know your connections are right and you you are going from your dvd into the reciever and then the reciever to the tv with hdmi check you tv as well make sure you have switched your input signal to to the video source were your plugged into the tv i dont know what kind of tv you have but you may need to double check that

Nov 11, 2009 | Denon AVR-1908

1 Answer

Denon Receiver AVR 1602 not playing Dolby Digital w/ Samsung BD


Dolby signals are passed via either an RF cable or optical link. Both the receiver and player need to have these switched on and that they are passing the correct signals. You clearly found the correct setting for the TV sound link. Now you just have to find the one for the DVD player.

Jun 02, 2017 | Denon AVR-3805 Receiver

1 Answer

Play phono - vinyl records


You need to purchase a phono preamp (about $20) and then the output of the preamp can be connected to any line level input on the receiver (tape, CD, DVD etc.)

Dan

Feb 25, 2009 | Denon AVR-1602 Receiver

Not finding what you are looking for?
Denon AVR-1602 Receiver Logo

1,037 people viewed this question

Ask a Question

Usually answered in minutes!

Top Denon Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5515 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

The Knight
The Knight

Level 3 Expert

75774 Answers

Are you a Denon Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...