Question about HP Photosmart 3210 Printer

1 Answer

I need help with my hp 3100 all-in-one printer

I keep getting an error message that say's: Ink system has failed. Unable to copy, receive faxes, or print. Refer to printer documentation. Error: 0xc18a0106. I have called customer support and they tell me to upgrade to a new printer because my warranty has run out and it would be cheaper to upgrade than to repair. They did not ktell me exactly what was wrong with the unit, but had me run through a few steps in which none of them worked. Is there anything I can do myself to get my printer working again? Any help would be appreciated.

Posted by on

  • frazzledvt Feb 11, 2008

    my printer hp3210 stopped printing black text. I replaced cartridges,they are all in warranty, and tech support had me unplug, redirect, and do everything under the sun. nothing works. Any suggestions. I also get the same error message.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 54 Answers

Try to replace both color and black catriage it might work

thank u

Posted on Feb 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ink system failure


I have a message on my printer
Ink System Failure
ink system has failed -unable to copy, receive faxes,or print.
Refer to printer documentation
error Oxc19a0107

Feb 10, 2011 | HP Photosmart 3310 Printer

1 Answer

I have a message on my printer Ink System Failure ink system has failed -unable to copy, receive faxes,or print. Refer to printer documentation error Oxc19a0002


Hi
Please do this and let me know
Unplug the printer, then pressing the help and ok buttons simultaneously plug it back in.
Let me know or Call +877 889 6859

Jan 06, 2011 | HP Photosmart 3310 Printer

1 Answer

Ink system has failed. Unable to copy, receive


normally in this scenario the whole printer needs to be replaced..

Oct 22, 2009 | HP Photosmart 3310 Printer

2 Answers

I have a Ink System Failure.


IssueAn 0xc18xxxxx or 0xc19xxxxx ink system error code displays on the front panel. The printer cannot copy, receive faxes, or print. Solution
Press the On button to turn the printer off. 
Unplug the power cord from the back of the printer.
Remove all the ink cartridges.
Wait two minutes.
Plug the power cord into the back of the printer.
Press the On button to turn the printer on. 
Install the ink cartridges when prompted.
If the error code does not display, the issue is resolved.
If the 0xc18xxxxx or 0xc19xxxxx ink system error code displays on the front panel, service the printer.

Dec 20, 2008 | HP Photosmart C5180 All-In-One InkJet...

4 Answers

Ink system has failed


IssueAn 0xc18xxxxx or 0xc19xxxxx ink system error code displays on the front panel. The printer cannot copy, receive faxes, or print. 
Solution
Press the On button to turn the printer off. 
Unplug the power cord from the back of the printer.
Remove all the ink cartridges.
Wait two minutes.
Plug the power cord into the back of the printer.
Press the On button to turn the printer on. 
Install the ink cartridges when prompted.
If the error code does not display, the issue is resolved.
If the 0xc18xxxxx or 0xc19xxxxx ink system error code displays on the front panel, service the printer.

Jul 18, 2008 | HP Photosmart C6100 All-In-One Printer

1 Answer

Photosmart hp 3310xi - ink failure???


Perform the steps given in the below webpage and if the issue persists then contact HP.

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00551397&cc=in&lc=en&dlc=en&product=439491#top

Jun 05, 2008 | HP Photosmart 3310 Printer

6 Answers

Error HP Photosmart 3310. No strart print, no scanning...


I have a Photosmart C6180 all in one and get an error message 0xc18a0101 Ink System has failed. Unable to copy, receive faxes or print. Refer to printer documentation. Error: 0xc18a101.

I put new cartridges in and tried to recalibrate as mentioned by someone on the board. Can anyone help, please?

Nov 16, 2007 | HP Photosmart 3310 Printer

Not finding what you are looking for?
HP Photosmart 3210 Printer Logo

249 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96627 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...