My disc while reading make noises, and doesnt read
On any disc, it makes noise. when it does, its not reading anything. The noise happens most of the time. when im lucky, it doesnt like for 2 min. then it reads. so whennever it makes noises then it doesnt read.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Im not an expert on CD drives but I have had this case happen in many times. If it sounds like its starting then randomly stops it sound more of a hardware disk problem. You may want to try reinstalling drivers or getting a new computer.
Well the disc driver obviously works on most of your games except saints row 2. Saints row 2 is in mint condition well i have this problem too with my 360 it reads some games and it doesn't read my other ones well theirs a few ways one is by leaving the game inside of the console and shut it down wait like 5 seconds and turn it back on. Another is to make sure the laser its self doesn't have dust on it. And when you put in a disc listen to it as it spins if makes any weird scratching noise its probably the laser hitting the disc a lot of 360s disc have been getting scratched recently due to the fact in microsoft's original design of the disc drive the laser keeps on hitting the disc and scratching it so if thats the case you have to replace the disc drive. If solutions don't help let me know i might be able to help you more.
turn it on wait wen it makes de noise for a minute but wit no disc then open it move the lens back and forth very lightly if you do it to fast the ps2 might not read for a day or 2 when ur done moving the lens back and forth intel it don't move lightly any more then try a disc if it don't work do this process intel it works but wait 5 min before you do it again so the ps2 won't reck for half a day before you turn the ps2 off to do the process ithhis works for me 1st or 2nd times
Hi you will probably get constant disk errors because it is not the best console you can get. The older versions are now stopped being prossesed. My best bet is to get some rubbing alcohol.The spray doesnt really make an effect but will also make an effect.Im not sure what the effect is but your bets bet is to get rubbing alcohol.
If you have any further questions please ask me.
Turns out the rubber disc grip on the spindle simply needs to be cleaned (using an alcohol wipe). This is the part that holds the disc firm while it's spinning...the noise and failed disc reads comes from this rubber getting dirty and allowing the disc to slip. Total time to fix including disassembly was less than 15 minutes!
goto www.llama.com they have a lot of helpful information on the 360. they also have a link to a site where you can buy a guide on repairing the 360 yourself for $25.00 You could even use this to start repairing 360's in your area and make some cash!
Well, with xbox I'm not to sure, but play station2 my son stepped on his and it didn't read the disk that was in it, but it played others, just is very noisy now, you could try contacting microsoft, they are very helpful with refunds -
For more microsoft support you either contact them live through computer, email, or phone,