Question about Linksys Wireless-G WRT54GS Router (e125894)

2 Answers

Cannot connect 2 Apple computers

The aiport indicates the computers are connected to the home network but they cannot go on-line.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I will give you the answer in point's: 1st confirm the latest firmware for your router. If it is a older firmware upgraded with the latest firmware .

2) As you said that , your mac shows you are connected. In that case find the ip address what you are getting on the mac, if you do not have any ip address , then it is the firmware issue, upgrade will solve .

3) Confirm the wireless security on the router. If you are using wep, then on the airport , try to get connected using a dollar sign and the key ( $********** ). then try to connect.

Posted on Feb 08, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    MVP:

    An expert that gotĀ 5 achievements.

    Master:

    An expert who has achieved Level 3.

    Sergeant:

    An expert that hasĀ over 500 points.

  • Master
  • 440 Answers

Re take them off reset network settings go in ther defult them

Posted on Feb 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you connect D-Link DIR-655 router if using an Apple computer? The Apple computer is currently connected to the modem. I have purchased a Dell laptop PC and want the PC to be connected on a...


1. Router's LAN1 connect to Apple through Ethernet cable.

2. Open your Dell Laptop's wireless network connection and search the network and then you can connect your Dell laptop to your router through wireless connectin.

Apr 02, 2010 | D-Link Xtreme N DIR-655 Wireless Router

1 Answer

I cant connect to two computers at the same time


How to connect....

1- Two Computers:

# We are connect two computers together to share Internet, printer, scanner, files, and even programs

We can do it through either way:

1- Use A Crossover Cable And Two Network Cards.Two network cards are installed in two computers.Then use crossover cable to connect them.

2- Use a Phone Line and Two Special Adapters Sold as "Phone line network Kit". Two adapters are installed in two computers. Then use existing Phone line to connect them.

Connecting Two Computers Wirelessly:

1- Wi-Fi
2- Bluetooth
3- Infrared


Several types of fixtures exist for home networking:

1- Hubs
2- Switches
3- Routers


2- Computer with the internet

Before you can connect to the Internet and access the World Wide Web, you need to have certain equipment. In brief, you must have:

-A computer (preferably running an up-to-date operating system); -
-A modem and access to a telephone line or a local area network (LAN) that is in turn connected to the Internet; and connection software that will allow you to establish an account with a service provider and access the Internet


You Need:

Modem: This converts your digital computer information into analogue telephone signals. Phone Line: his may be your biggest expense after the equipment.

Internet Service Provider (ISP): ISP has a permanent connection to the Internet.

ADSL: a newly standardized transmission technology facilitating simultaneous use of normal telephone services, data transmission of 6 Mbit/s in the downstream and Basic-rate Access (BRA).

ADSL facilitates the simultaneous use of normal telephone services, ISDN, and high speed data transmission.

Another advantage of having an ADSL line is not missing calls while you're online, as both voice and data can be transferred at the same time.

Jun 19, 2009 | D-Link AirPlus Xtreme G DI-624 Wireless...

1 Answer

Apple AirPort cannot get IP address from cable modem using DHCP


go to applications,utilities and go to airport set up and check the settings, it could need the DHCP setting up or the old settings deleted

May 24, 2009 | Apple AirPort Extreme Router

1 Answer

2 wire


I experienced this same problem on a friend's AT&T 2WIRE 2701HG-B router. The primary computer used WinXP,sp3; I added a laptop, WinXP,sp3 and a Macbook Pro w/ Leo OS v11, successfully.

How to resolve the issue (rather, how I resolved this issue):

From the desktop computer, connected to 2WIRE:

1) Open a browser and type http://gateway.2wire.net or http://192.168.1.254. This site will automatically detect your settings and provide the necessary info., required to set up your wireless network.

NOTE: NTWK information/settings for THIS router can NOT be retrieved via traditional methods. Ignore all other information that assigns a name to your network and/or password. Follow only this wizard, for success in setting up your wireless connection.

2) Verify that your Firewall and System settings are correct and up-to-date. If not, update your software by pressing the link on the right.

3) Click the Home Networking tab (at top of page):

Locate @ the right of your screen, "Status at a Glance".
Under "Home Network", verify:
"Ethernet = x"; (where x = $1)
"Wireless = 0" (ZERO IS OKAY!)

("Zero" will change to "1, 2, 3, etc.," upon successful connection of ea. new wireless device(s) added to the NTWK).

* Once a new wireless device is initially and successfully connected to the NTWK, the LCD wireless indicator of the router will illuminate green.

4) Under "Wireless Settings":

NOTE, the network name. This is the name (of Network) that you will use to connect your wireless device(s).

The default password is the 10-digit number [in brackets] displayed on the sticker, located on the bottom of the router (directly above the UPC code, below the SN).

5) Click "Edit Settings":

In the DEVICE YOU ARE ADDING, click or type in the name of NTWK, as stated under "Wireless Settings". Next, type in the 64-bit WEP password (10-digit number displayed on the sticker, located on the bottom of the 2WIRE router).

6) Click "Verify your Home Network".

Verify the wireless device you added is displayed and has been added to the NTWK.
The Ethernet setting should still remain = 1 (or however many devices are connected to the INET via wire) and Wireless should = 1 (or more, if +1 device has been added).
NOW, the wireless LED shall be glowing the same pretty green, as all the other indicators on the router! You are now connected. Congratulations!

Feb 08, 2009 | 2wire 2700HG-B Router (2700HGB)

2 Answers

Cannot setup home wireless network between computers


Hi!
Since all computers are online, you do not need to change any setting on the router for the computers to share file or resources.

If you are using Windows XP - try this link:

http://support.microsoft.com/kb/304040

For Vista:

http://windowshelp.microsoft.com/Windows/en-US/Help/e2e03106-2546-4085-bd07-6c3ac95003111033.mspx


I hope that helps!

Good luck and have a nice say!

Dec 02, 2008 | 2wire 2700HG-B Router (2700HGB)

2 Answers

Can't connect to 3Com Office connect wireless from Apple Mac Pro


PPPoE connection is set up

1. Control Panel, double-click Network Connections. 2. Click the PPPoE connection under the Broadband group that you want to share, and then click Change settings of this connection under Network Tasks. 3. On the Advanced tab, click to select the Allow other network users to connect through this computer's Internet connection check box. 4. PPPoE connections behave in a similar way as do dial-up networking (DUN) connections, and you may want the connection to be automatically dialed when another computer on your network attempts to connect to the Internet. To do this, click to select the Establish a dial-up connection whenever a computer on my network attempts to access the Internet check box. 5. If you want to allow other network users to enable or disable the shared Internet connection, click to select the Allow other network users to control or disable the shared Internet connection check box. 6. Under Internet Connection Sharing, in Home networking connection, click the LAN (Local Area Network) connection that connects the computer that is sharing its PPPoE Internet connection to the other computers on your network.

Feb 07, 2008 | 3Com OfficeConnect Wireless 11g Cable/DSL...

1 Answer

Finding the MAC Address of a Macintosh


OSX 1. Click on the Apple menu and select the System Preferences option. 2. In the "System Preferences" window, Select Network. 3. When the "Network" Window opens, select Built-in Ethernet and/or Airport from the "Show" Menu. 4. Once you do this, look near the bottom and you will see the Ethernet Address or Aiport ID. This is the MAC Address, make note of it. OS9 and below 1. Click on the Apple menu option. 2. Go to the Utilities folder 3. Open the program called Apple System Profiler 4. Select the System Profile tab 5. Under Network Overview > Appletalk> 6. Once there you will find the Hardware address, this is the MAC Address, make note of it.

Feb 16, 2006 | Linksys EtherFast Cable/DSL and Voice...

1 Answer

Finding the MAC Address of a Macintosh


OSX 1. Click on the Apple menu and select the System Preferences option. 2. In the "System Preferences" window, Select Network. 3. When the "Network" Window opens, select Built-in Ethernet and/or Airport from the "Show" Menu. 4. Once you do this, look near the bottom and you will see the Ethernet Address or Aiport ID. This is the MAC Address, make note of it. OS9 and below 1. Click on the Apple menu option. 2. Go to the Utilities folder 3. Open the program called Apple System Profiler 4. Select the System Profile tab 5. Under Network Overview > Appletalk> 6. Once there you will find the Hardware address, this is the MAC Address, make note of it.

Feb 16, 2006 | Linksys BEFSR11 Router

1 Answer

Finding the MAC Address of a Macintosh


in OSX: 1. Click on the Apple menu and select the System Preferences option. 2. In the "System Preferences" window, Select Network. 3. When the "Network" Window opens, select Built-in Ethernet and/or Airport from the "Show" Menu. 4. Once you do this, look near the bottom and you will see the Ethernet Address or Aiport ID. This is the MAC Address, make note of it. OS9 and below: 1. Click on the Apple menu option. 2. Go to the Utilities folder 3. Open the program called Apple System Profiler 4. Select the System Profile tab 5. Under Network Overview > Appletalk> 6. Once there you will find the Hardware address, this is the MAC Address, make note of it.

Feb 16, 2006 | Linksys BEFSX41 Router (DHBEFSX41)

1 Answer

Finding the MAC Address of a Macintosh


Please follow the instructions which fits the Mac OS that is being run: OSX 1. Click on the Apple menu and select the System Preferences option. 2. In the "System Preferences" window, Select Network. 3. When the "Network" Window opens, select Built-in Ethernet and/or Airport from the "Show" Menu. 4. Once you do this, look near the bottom and you will see the Ethernet Address or Aiport ID. This is the MAC Address, make note of it. OS9 and below 1. Click on the Apple menu option. 2. Go to the Utilities folder 3. Open the program called Apple System Profiler 4. Select the System Profile tab 5. Under Network Overview > Appletalk> 6. Once there you will find the Hardware address, this is the MAC Address, make note of it.

Feb 16, 2006 | Linksys WRT51AB Wireless Router

Not finding what you are looking for?
Linksys Wireless-G WRT54GS Router (e125894) Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2259 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

Mike

Level 3 Expert

4332 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...