Washing machine i have an indesit wahing machine that comes up with an error code F 04 what is it and how do i fix it??? i was giving some info on wha to do, but i got stuck when it said turn selector to a large 'off dot' position, which i dont have one. my mahinging machine is a indesit wide 127

try here

https://www.northlondonappliancerepairs.co.uk/error-codes/indesit-error-codes/error-codes-for-indesit-washing-machines.html

Could be the program select error, but why not check all error codes and save them on the Indesit site yourself.
Error Codes Indesit Service

I have the same problem. Check this info (the below link) I found on F - 08 error for someones hotpoint washing machine. It may be the same thing. There could be standard error codes for all washing machines, maybe.

http://www.ukwhitegoods.co.uk/modules.php?name=Forums&file=viewtopic&printertopic=1&t=37910&start=0&postdays=0&postorder=asc&vote=viewresult&popup=1

I HAVE THE FAULT CODES FOR SOME INDESIT MACHINES THEY ARE ONLY SUPPLIED TO THEIR ENGINEERS BUT A MATE OF MINE WORKED FOR INDESIT/HOTPOINT (ONE COMPANY NOW) UP UNTIL A MONTH AGO , HOWEVER ,THEY ARE AT WORK & I WONT BE IN UNTIL FRIDAY IF YOU CAN HANG FIRE UNTIL THEN I MIGHT JUST BE ABLE TO HELP YOU OUT!

Hi,

This is a pressure switch error.
It still thinks the machine is empty because the switch sees no pressure (simple dip tube).

But this may be as simple as a vent hose come off.

To check,
First isolate supply, then remove screws at top rear of the machine.
Slide the lid rearwards, and remove.

The small hoses should go to the drawer area, and the pressure switch will sit at the end of one of them.
If there are any rips or damage to a hose it need replacing.
Check all hoses are where they should be.

If this doesn't work, please ask here again so I can troubleshoot further.
Thanks for using Fixya!

Dear gavinrolason,
Error code F-04 and F-05
Check the the connection of the drainage hose to your sink wastage, as it may be blocked and the drainage of water impeded
Hope it helps, this info is applicable to W840/W860 Hotpoint Machines

Regards
EngineerGR

al indesit washer have a reset pattern
switch of with on/off button
turn selector to a large 'off dot' position
wait a couple of mins then switch back on
wait 2 mins
then switch off again and turn selector to a cycle start position
wait 2 mins turn back on and let it run the FULL cycle do not mess it about.
Sometimes it takes 2 or3 attempts so be patient

If there is a fault it will appear again within the cycle and give you an error code eg E7/E1 etc note this and call a repair man he will track it from this code.

i am a recently retired engineer of 20 years, but this sounds like (based on the info given) a heater element fault, after the machine fills up and agitates a few times the heater should start, check the heater for open circuit, replace if needed, of course it just could be a wire off? if i have helped rate me please

The F002 error codes relates to a motor problem. Do you know if the motor spins ?

REPACE FLOAT SWITCH