Problem with post forward

Wrt54g can be used as either a wireless router or access point. I am not familiar with your broadband service, but if it has a data port just connect it to Internet port.

http://www.pctechbytes.com/networking/how-to-configure-a-linksys-wrt54g-router

http://www.pctechbytes.com/networking/linksys-router-password

LINKSYS ::::

NAT STRICT

Step 1 : Connect Router - Computer

Step 2 : Open Router Setup by typing http ://192.168.1.1

Step 3 : Click Applications and Gaming

Step 4 : Click DMZ

Step 5 : Select Enable and Give the IP Address of the XBOX/PS3/Wii in it

Step 6 : Click Save settings

Step 7 : Unplug the Power cord from the router and turn Off XBOX /PS3/Wii

Step 8 : Plug the power cord back to the router and wait till the lights are Solid

Step 9 : Turn on the Xbox/PS3/Wii

Step 10 : Test the Connection

=====================================================================

Else ...

Under application and gaming you can find port range forward

There you can open the ports one by one

And give the IP Address of the PS3 for all the ports opened

Need Model and Version number of your Linksys router. To find this info look at Tag on the bottom of your router, look for something like this WRT54G V8 (Model/Version). After that we can help you fix your problem. Thanks!

More information is needed about your setup.

Do you have:

cable modem <--> router <--> computer
and:
cable-telephone-box <---> telephone

or:

DSL-modem <--- VOIP adapter --> telephone
and VOIP adapter -> WAN port on WRT54G <--> computer

Please clarify.

You can go to the link below then select your router model number. It will give you a step by step

http://www.portforward.com/english/routers/port_forwarding/routerindex.htm

your SPA2102-R seems to have one ethernet connection and one internet connection.
your WRT54G-TM seems to have one internet connection and 4 ethernet connections.

What you are trying to achive is; plug a ethernet cable into the ethernet connection on your SPA2102-R then plug the other end into the internet port of the WRT54G-TM

hope this helps, I have assumed that you intend to use a DSL broadband supplier not ADSL.

if you are changing service from DSL to ADSL then your WRT54G-TM needs to be first in line configured and working. then plug the internet port from the SPA2102-R into any of the WRT54G-TM ethernet ports.

Vonage uses these ports: 5060 - 5070
10000 - 25000

First, go and call linksys's technical support. TO do it urself, go to port range forwarding, and enter the information necessary. I would call them though.

This web page has a wonderful graphic step by step to use port forward for your linksys router:

http://portforward.com/english/routers/port_forwarding/Linksys/WRT54G/default.htm

Hope this helps.