Question about Buffalo Technology WHR-G54S Wireless Router (WHR2G54S)

2 Answers

Canot connect wireless

I am having problem trying to connect wirelessly using my laptop. My desktop can connect through the router. When i try to setup the router using the setup disc, it reached step 18 and said that internet connection had been established. I tried to click "next" but a pop up said tat connection to airstation failed. Now, i can to the wireless network from the router but it only provide local network. I canot access the internet. However i can connect to the internet using my fren wireless d-link router.I am using window vista by the way. Please help me to solve tis problem. Thx

Posted by on

  • 1 more comment 
  • edle ed May 14, 2008

    I have dsl service with Supra Telecom. My desktop works fine with their Netopia modem; however, when I try to establish wireless connection for my laptop it does not work. What can you suggest? My wireless router is d-link WB3210.



    Thanks

  • Anonymous Jul 25, 2008

    Hi,

    I had the same problem but with

    Buffalo Technology WHR-G125 Wireless Router.

    Help is appriciated



    Suresh

  • maryst Jul 31, 2008

    says i am connected but get nowhere

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 103 Answers

Hi sir,

Hope this will give you an idea. Hope the wireless signal is fine when connecting to wireless router. But I pressumed there's no problem with your firewalls and basic installation procedures. And it gives me a hint that you can run using your fren wireless router. Now, check the routers name that exactly searched from Network Wireless Setup Wizard at control panel. If there's a need to configure internet connection at routers setup menu please do. Please refer also your assigned IP by your ISP, gateway, dns1 and dns2 if your connection type is Static. If it is dynamic or PPPOE and other connection type please ask assistance with your ISP for the entries.

Best regards,
Rosener Guyano

Posted on Feb 05, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Make sure that your wireless is set to access point only and not firewall mode.

Posted on Feb 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Im trying to hook my desktop up to the wireless router so that me and my dad (both with laptops) will hook up wirelessly. I tried reseting Linksys Broadband Wireless G Router and made sure all of the...


Try: Clarify - the desktop is connected with an ether net cable? Is working? Install router software on desktop to manage router. Trying to connect desktop wirelessly? Wireless card installed? Radio activated? Network detected?

Dec 31, 2010 | Linksys BEFW11S4 Wireless-B Broadband...

1 Answer

I have a dell desktop and laptop. I have satellite internet and a Linksys router. My desktop is connected to the internet modem. I have installed the router on the desktop, connecting the modem cable to...


As long as the router has wireless antenna's on it or indicates it is a wireless model then all you need to do is turn on the wireless function of the router. You do this by access the router, open a web browser and try either http://192.168.0.1 or http://192.168.0.100 one of those should be your router. Log in and go to the wireless settings. There you can enable it and configure it.

From there, as long as your laptop has a wireless network card built in, it will see the wireless network and you can just connect to it...

Thanks!
Tim

Oct 01, 2010 | Computers & Internet

1 Answer

Can't Connect Laptops Wirelessly to Linksys WRT54G2


1.Log into router (192.168.0.1) user name "admin

2. Verify wireless router name( on the computer) >>> ( on/off)
3.Note router name you are connecting to.
4.. Check the laptop do ipconfig /all to see current IP addresses.
5. Set the Desktop/laptop up in the router by WEP KEY or MAC address.
6.Note router name you are connecting to.

Jun 28, 2010 | Linksys Wireless-G WRT54GS Router...

1 Answer

I have a DIR-615 router that I have no problem connecting my laptops with internal wireless. However, trying to connect my desktop with a DWL-G620 Wireless Adapter. It detect the network but will not...


The WPA key is the encryption key that is configured in the router's wireless settings and the wireless cards in the laptop and desktop needs to be configured with this encryption setting to allow the laptop and desktop computer to communicate with the router.
You can view the encryption settings in the router's wireless settings or on the laptop's wireless card settings and then apply these encryption settings to the desktop's wireless card (ie. the SSID and the WPA encryption).

Nov 15, 2009 | D-Link Air DWL 520 802.11b (DWL-520)...

1 Answer

Connecting Laptop wireless and Desktop wired to the router


Do you need to see the desktop or just share folders from each other? If the latter then you need to do the following:

Use Windows Explorer and select a folder you want to share. Right click and select sharing and security.

On the sharing tab click on Share this folder. Enter a share name ( I like to enter the PC name _folder name; Rick1_Downloads)

Click on Permissions. If your ok with everyone using the PC's and Laptops having access then highlight Everyone and click on Full Control.

Do this on each PC and Laptop.

That should be it or darned near close.

Apr 10, 2009 | D-Link AirPlus DI-524 Wireless Router

1 Answer

Laptop connecting but not my desktop


> Try changing and creating a new wireless network name.
> Try changing your security mode like WEP to WPA or vice versa..
> Try to update you drivers on your laptop then restart your computer before connecting to your network..
> Try assinging DNS ( Domain Name Server.) ask your router manufacture for the DNS that you could use.
> Make sure you typing the correct password for your wireless network..
> Make sure you disable WI-FI protected setup and on the router.
> Try to disable Anti-virus and Firewalls on you laptop.

Feb 17, 2009 | Linksys Wireless-G Broadband Router

1 Answer

Setting up Netgear Wireless-N router


try this plug up a line to laptop to modem to check to see if you can get connected if so then make sure you are on the same network and if so then call comcast to help you setup the laptop wireless settings in sound like the settings online doesn't have the laptop enable to accept the laptop

Dec 01, 2008 | NetGear WNDR3300 - RangeMax Dual Band...

1 Answer

HP Laptop does not connect to internet unless directly


Hello dstoller,
You description is very confusing to sort exactly what is or isn't happening.Let me try to sort out what you have:

You have a Laptop

You have a Desktop

Desktop has a printer attached

You have a DSL modem with a wireless router

Laptop via ethernet: Good

Laptop via wireless: Not Good?

Desktop via wireless: Good

Not sure exactly what you are needing help with...


- Vincent

Still not sure what

Nov 22, 2008 | 2wire (1000-000005-002) 802.11g/b Wireless...

1 Answer

Connecting wireless router to laptop computer


Try changing the channel on the router. It would be better to isolate the problem first by trying to connect to other wireless networks on your laptop or having someone's laptop connect to your home wireless network.

Sep 03, 2008 | Linksys WRT54GX2 Wireless-G Broadband...

1 Answer

3 weeks ago installed netgear rangemax router along with a gateway laptop com. also a H.P. printer wireless. eveerything was working fine now printer will not work wireless and i canot get into my router...


Try the reset switch on the back of the router. Using a paperclip, hold the reste switch in for 30 secs and then power down the router. Once that is completed, you should be able to access the router config page under factory settings.

Mar 14, 2008 | Computers & Internet

Not finding what you are looking for?
Buffalo Technology WHR-G54S Wireless Router (WHR2G54S) Logo

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buffalo Technology Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Prashant M
Prashant M

Level 3 Expert

2260 Answers

hellics

Level 1 Expert

45 Answers

Are you a Buffalo Technology Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...