My Hitachi 32 HDT50 one day stopped receiving a signal from the DVD player. It was shortly after (a few weeks) a power outage, but the tv is on a surge protector. i've tried switching cables, inputs, and DVDs, but the tv says "no signal". i don't have this hooked up to cable, both otherwise the menu functions on the tv work.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
infrared board may have a fault. its in the front part on the board with the buttons. the infrared receiver may be going or gone it looks like a square led. that picks up the signal light from the remote.
can't seem to get my son's 19" tv/dvd combo set to run a movie
it continues to go thru loading then pops up and says no disc. while the whole time it is in the player.
I have treid unplugging the set, I have tried pushing all these buttons and no luck.
Last week our electric service was out for a whole day, and it seems it was around that time this happened. any suggestions?
Problem: Hooking up Hitachi UT42X902 to a Wii Solution: Even few technicans understand the issue because they have a hard time comprehending the Hitachi UT42X902 Director Series only has 1 HDMI jack and no RCA connections. I have both a Wii and UT42X902. At one point when I had a 4-way call with Hitachi, Nintendo, and Onkyo trying to figure this all out. So after several miss-steps, here is what I did and it worked… I ended up buying an Onkyo TX-SR606 AV Receiver Amplifier-Tuner which has "uplink" capability. (Do not buy the TX-SR506 or other Onkyo models they do not have the right uplink capability to work the Wii on the UT42X902 Director Series, I already made that mistake and the store would not take the 506 back by the time I got everything I needed to connect the system.) I then bought a off Nintendo market Red/White/Blue/Green/Yellow HD or HDMI compatible (for the Onkyo side) on one end and Wii compatible on the other (sorry I don’t remember the technical name for the cable but they are pretty common and Best Buy and other electronics stores have it).I connected the cable to my Wii and the 5 ended side of the cable to the Onkyo.My CATV satellite box and DVD player are also connected to the Onkyo with Monster 1000HD (10.5 Mbps) HDMI cables.The Onkyo is connected to the Hitachi UT42X902 also via a Monster 1000HD (10.5 Mbps) HDMI cable. The Wii works perfectly with this setup. You may have to go into some menus to set up the sound (I do not have external speakers yet). Good luck.I usually am not on this site but will try to monitor this site every few days for the next few weeks so post is you have questions, and I will try to help. Disclaimer: I am not a TV tech and do not sell, represent any TV, Receiver-tuner-Amp, websites, cables, TV channels, services or other related products, nor do I own stock in any of these companies. I am a mere mortal girl who wanted to use her Wii Fit on her big screen TV.
there is no cable slot. the monitor is not a receiver. it has no tuner in it. it will need a signal from a tuner box. and that must be fed to the tv with an hdmi cable or a dvid cable for hd to work. see your manual for further information on cables. see your cable supplier for information on hd boxes available in your area. if you do not buy hd service, you will not get an hd signal. so you will see little difference from a non hd device. your dvd player may have hd capabilities, but will also need the same cable to deliver true hd signal. the good news is that its fixable by using the right equipment. good luck mark