Question about Belkin (F5D7230-4) Router (587009)

1 Answer

Belkin wireless router

Belkin router keeps changing ip address of my dsl and i cant get on the internet plz help

Posted by on

  • derekf100 Feb 03, 2008

    Thank you i'l try to get it figured out

  • derekf100 Feb 03, 2008

    hey i got it working thanks alot man

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi,

Your Belkin router is normally configured to get a dynamic IP Add from your Internet provider unless otherwise configured. Most ISP's network where clients/subscribers connect (through DSL) has a DHCP server that hands out this IP adds. If your router keeps on changing its WAN IP add, it may presumably be because:
1. Your router keeps on rebooting or powering on/off and everytime it turns on, it is given a new IP add;
2. Your ISP's DHCP server keeps on renewing its lease on the IP add given to your router.

Corrective measures would entail:
a. Do a full hard reset of your router and go through the installation setup again. Of course this would revert all settings/configuration to factory default; and/or
b. Contact your ISP and explain your concern.

In some cases, the router's MAC address has an issue that the ISP's DHCP is keeping a hard time recognizing it. this can be corrected with a firmware update.

Hope this be of help/idea. Pls post back how things tunrs up or should you need additional information.

Good luck and kin regards.

Posted on Feb 03, 2008

  • Louie  Role
    Louie Role Feb 04, 2008

    You're more than welcome, glad to be of assistance and appreciate the rating.

    Cheers.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On belkin surf router clicked on set as access point. then i tried to change it but my computer cant get internet from the router so i cant access the belkin homepage. can u help


the only thing you need to do is reset your router to go the IP address original 192.168.2.1
because when you setup it as a access point the router change the Ip Address.

restore the router to factory default settings, please do the following:

1. Unplug the router's power supply
2. Press and hold the reset button on theback of the router
3. Keep the reset button depressed and, at the same time, plug the power supply back in
4. Keep the reset button depressed for another 10 seconds
5. Release the reset button

do this for 3 times and you will acces your router.


Good luck

Please rate me techbelkin

Aug 02, 2010 | Belkin Wireless Surf Router (F7D2301)

1 Answer

How can i secure a BELKIN WIRELESS G ROUTER


Is there any computer connected to the router ?
If not then you will need to connect the computer to the router.
Do not change any wireless settings on the router with the wireless computer.
you will need to connect the computer to the router with the Ethernet cable.
check the IP address of the computer.
open the router set up page of the router.
Here you can change the wireless settings of the router.
Now once you change the network anme and security on the router, you will need to connect to the wireless network on your wireless computers.
Click Here for step by step instructions

Apr 09, 2010 | Gateway Belkin 54g Wireless DSL/Cable...

1 Answer

Every time i hook up the wireless router to the dsl router it doesnt find the internet ( its is a embarq 660 series dsl router and i have a belkin N1 wireless router)


the problem you are facing is due to the double nat issue(the embarq modem provides the ip address in the range of belkin router, that is 192.168.2.1)...hardwire the pc to the lan port of router.
login to the router setup page(type 192.168.2.1 in IE)
in router setup page, click on lan settings and change your lan ip to 192.168.5.1....the problem ll get resolved...if still the status is not connected, switch off the router and modem and switch on it after a minute....it ll get fixed

Feb 12, 2010 | Belkin (F5D8231-4) Wireless Router...

2 Answers

I followed the instruction but can't seem to connect to the internet, do i need a separate modem or is the one in my regular computer enough. i have belkin G wireless router. i have tried everything....


If you are trying to connect wireless you will need a wireless card. Routers are very peticular about the way they are set up. Unhook everything turn everything off and reboot computer, and run the software disc that came with the router. Plug the dsl into the the Blue colored port or Wlan then reboot computer and then plug cable into computer. This should work.

Nov 21, 2009 | Belkin (F5D7633UK4A) Wireless Router

1 Answer

Belkin54g default gateway problems and connecting to router page


reset your Router via pin whole at its back then set the config of TCP/4 and obtain Ip automaticaly and obtain DNS automaticaly... later set your settings according by 192.168.1.2 without changing IP and then turn off you router ... turn it on after 5 to 10 min .. thank you

Jun 24, 2009 | Gateway Belkin 54g Wireless DSL/Cable...

1 Answer

Configuration of Belkin Wireless Router F5D6231


Whoops, found it. http://cache-www.belkin.com/support/dl/f5d6231-4_manual.pdf

If I were setting this up for myself or a customer, I'd keep the Airtel IP's and let it be the DHCP server. To do this, you pick a fixed IP address for the Belkin, something like 192.168.1.251. Log into the Belkin and change the LAN IP address to that and turn off DHCP. Those instructions start on pdf page 34.

Now, plug one of the 4 ports into the Airtel, and from a computer connected to the network type in 192.168.1.251 in Internet Explorer. It should get you to the Belkin where you finish setting it up for wireless security and password from page 38.

You won't use the WAN port.

Carl
.

May 31, 2009 | Belkin Wireless Cable/DSL Gateway Router

1 Answer

My Belkin G Wireless Router cant even get passed step 1. My lap top recieves the signal but their is no internet! Help please


Since your unable to access internet through the router(wireless) ,& globe light is flashing--I suggest you to refresh the network list and connect to your network again still if it won't work then you need to Re- configure it. Because your Modem(cable/dsl) is working fine. Check the ip address of your computer. if its invalid then you need to do the "reset" on router (ip address should be 192.168.2... range).
Or else you can call (toll free number) for belkin for reconfiguration
Hope this suggestion helps for you both...


Apr 11, 2009 | Belkin (F5D7230-4) Router (587009)

1 Answer

I secured my wireless network but have forgotten the password


hey what you can do is you can reset the entire router... by using the reset button on your belkin router... Or else you can also access the router by using the following IP address in the internet exlorer...

try 192.168.1.1 or 192.168.1.0 & then go to the wep settings & reset the router or change the password for the router...

Jan 17, 2009 | Gateway Belkin 54g Wireless DSL/Cable...

2 Answers

Belkin router and ps3


Hi Srini here ,

There could be a problem with the wireless configuration on ur belkin router.

Go ahead and type the following in the command prompt of ur computer.

ipconfig

:-This will list out the ip address and the default gateway of the computer
:-Make a note of Default Gate way.
:-Type the default gate way address in to the address bar of the internet explorer.
:-It will take u to the router configuration page.
:-it might ask u to enter router password.(Enter it)
:-In the router page u could see wireless settings options on the lefthand side of ur router confiuration page.
:-Make it appropriate accordingly
:-if u do not know what to do with wireless settings ..then send me ur product details ..will tell u further querries..

Most of the time the wireless device do not connect to router due to wrong "Wireless network key"
:Make sure you have same wireless netwrok settings in the devices as in the wireless router.

:-Send me ur product details and ur setting details like

ISP(Internet Service Provider):-
Brand Name of the modem:-
Model no. of the belkin router:-

If u would like to resolve ur problem soon then send me all details..



Apr 22, 2008 | Gateway Belkin 54g Wireless DSL/Cable...

Not finding what you are looking for?
Belkin (F5D7230-4) Router (587009) Logo

515 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

steve morris
steve morris

Level 3 Expert

1673 Answers

Christopher Thrash

Level 3 Expert

425 Answers

Are you a Belkin Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...