How do i set the hands on my watch to match the digital time its a promaster sst and has world time the time for england is correct but i cant get the hands to match

To determine the exact model and specifications of your Citizen Eco-Drive, flip the watch to the reverse. On the case back will be extensive information about your timepiece. You're looking for the "movement caliber," a four-character combination of letters and numbers, separated from the seven-digit "case number" by a hyphen.
Next step, visit this links:
- citizenwatches.com.au/instruction-manuals
- citizenwatch.com/COA/English/settings.asp

Hope this helps (remember to rate this answer).

Some Renato anidigis are world timers tracking second times and time zones. On my Vulcan World timer for example, pressing the crown allows you to select and set a second city and time zone for the digital display while the analog dial continues to show the primary local time you entered when you did the initial setup. If you want both displays to show the same time, simply set the same city for both displays. To set the secondary digital display on mine, after pressing the crown, CITY would blink, and I would choose the same city and time zone again rather than let the indicator rest on a different one at random.

cant set hands to match digital time

Copy http://www.citizenwatch.com/COA/English/settings.asp

into your search engine and you should arrive at the Citizen web site for setting instructions. Insert the information asked for and you should be able to download instructions.

Click on my profile (escapement), then click on Tips and Tricks. There you will find links to all watch manuals.Rate me, please .

Click on my profile (escapement), then click on Tips and Tricks. There you will find link to all citizen watch manuals. Rate me, please.

Find Citizen manuals in my tips.

It may well be that the digital time displayed on the LCD is correct, but the hands (referred to as analog time in the manual) do not match.
If this is the case, to set the so called analog time:
Press the lower left button six times to enter HS (hand setting) mode.
Then press and hold the upper left button until the display starts to flash.
You can now use the two buttons on the right to move the hands forward or backwards to exactly the same ime as the digital LCD display.
When finished adjusting the hands press the upper left button one last time to exit.

I too was confused at first at setting the second hand after reading the directions. I read your post in searching for a solution, then I figured it out. Check the watch face, the second hand is operating using military time. (24 hr. time) You will see 24 hour time embedded on the face.
For example: if you wanted to set both hands to be at the same time to test this. At say 10 p.m. set the second time hand to 22 for 2200 hrs. (10 p.m.) Let's say you woke up at 7 a.m. The second hand would be at 0700 (Embedded on watch face) then at noon it would say 1200 on the watch face... I now use the normal hands for local time and set the 24 hour hand for my home time.
I hope this helps.