Question about Pioneer PRO-700HD 64" Rear Projection Television

2 Answers

Pioneer PRO-700HD HDTV problem

My pioneer hdtv receiver that I installed in the PRO-700HD has never worked reliably. I would like to buy a different brand of hdtv receiver (like the TIVO hdtv or series 3 receivers. My question is: can I use that receiver with an OTA antenna and plug it into the video input (either video 1 or video 2) using the component cable assembly and receive high definition performance approximating 1080i ?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 64 Answers

The short answer is YES. The tivo series 3 supports OTA HD programming and Component HD video up to 1080i. Here is a spec chart for the series 3:

http://www.tivo.com/whatistivo/Series3/s3specs.html

I hope this answer your question... good luck

Posted on Feb 02, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,067 Answers

Ya u just plug in hd antenna in qam in antenna in cox cable style then scan for chs in tvs menu ok

Posted on Feb 02, 2008

  • 1 more comment 
  • nick helpap
    nick helpap Feb 02, 2008

    sum chs are 1080 i sum are only 720 p like fox

  • nick helpap
    nick helpap Feb 02, 2008

    if it dont have off air antenna samsung sells a digital top box at best buy to get it in coumpoiunt cable tv must have off air input if it have built in hdtuner ok

  • nick helpap
    nick helpap Feb 02, 2008

    rear projection tho wont show hd like it should only plmasa will then 2nd lcd ok

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pioneer Pro 700HD picture distortion


horizontal capacitor parts should be replaced...

Dec 31, 2009 | Pioneer PRO-700HD 64" Rear Projection...

1 Answer

All my inputs create a rapidly rolling screen.


EITHER you have bad filtor capacitors in 5 & 9 volt circuits or you have bad electrolitic capacitors in vertical circuit. J.D.W.

Jun 18, 2009 | Pioneer PRO-700HD 64" Rear Projection...

2 Answers

Pioneer Pro-700HD Mirror Broken


Thanks for trying… partstore.com was actually the website that I originally tried ordering from. I feel lame for not including that tidbit of info on my original post because I didn't want to give that site a bad rap. After a bit more reasearch I discovered this site: http://www.highreflectivemirrors.com/ they carry the replacement for only $120 with free shipping and with only a few clicks I purchased it via PayPal. I am currently awaiting delivery and will post again if for some reason it doesn't work out.

Oct 17, 2008 | Pioneer PRO-700HD 64" Rear Projection...

1 Answer

Power problem on Pioneer Pro-700HD


The failure is not on the power supply but the convergence amplifiers STK ICs have the 24 volts shorted.
If that fuse is blowing, de-solder the convergence ICs and put a new fuse to power up the TV; you should see distorted video when the TV powers up and the fuse should not blow.
The service manual migth not help much in this case since the failure is easy to pin point.

Good Luck.

Oct 03, 2008 | Pioneer PRO-700HD 64" Rear Projection...

3 Answers

Tony Fidaleo's Pioneer PRO-700HD


Once I look at the schematic diagram, I might be able to know the part that is blowing that fuse.

Jul 28, 2008 | Pioneer PRO-700HD 64" Rear Projection...

1 Answer

TV not working


need mor info the tv when turn on after 15 or 30 minuts works fine ?

Mar 21, 2008 | Pioneer PRO-520HD 53" Rear Projection...

1 Answer

Panel Door for the Pioneer Elite Pro-91


I am still awaiting someone to give me advice on how to proceed, or where I can go to get help. I have contacted Star Electronics here in Suwanee and the owner, Nafiz came out and took my chassis back to the shop with him. His prices are very reasonable and he is really pleasant to work with. I hope it all works out. Please keep me informed if you have any other suggestions.

Thanks,
Mz_O

Feb 20, 2008 | Pioneer PRO-700HD 64" Rear Projection...

1 Answer

Blue lamp climbs up on a curve from center of screen


convergence sys. Usually they use STK ICs in there, replace them.


Mr Bob

Dec 22, 2007 | Pioneer PRO-700HD 64" Rear Projection...

Not finding what you are looking for?
Pioneer PRO-700HD 64" Rear Projection Television Logo

Related Topics:

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

zorbrack

Level 1 Expert

19 Answers

Are you a Pioneer Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...