DeLonghi Debige 2440 Electric/Gas Double Oven Fan Failure Light

you will need to change the motor
This video will show you how to replace fan oven element in your
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.

if the temp indicator light comes on and/or oven fan circulates then its most likely the heating element. if neither then its thermostat or selector switch...

If the fan is working o/k, and it it is an electric oven, then the oven element has probably failed.

It is usually located at the rear of the oven compartment behind a removeable cover.
Hopew this helps you.

You can request a manual from the manufacturer or you can get one online in Delonghi website by quoting the model and serial # of the product.

http://www.fixya.com/support/r4964670-get_manual_most_any_electronic_device

We just moved in to a place that has this oven, if you use the setting with the fan with a circle round it, seems to get hot! Don't know what the other is for though!

Hope it helps!

Pete

I just installed one in my house. I found that when you start the lower (gas) oven you need to turn the dial all the way on to 500*, push the knob in (you should hear the igniters clicking), then even when you see flames coming out of the burner, continue the ignition for 10 to 15 seconds. It should continue to stay lit thereafter.

Bake- Normal convection- both upper and lower heating elements.

Conv. Bake- Semi-forced convection- both upper and lower elements, heat is then distributed throughout the oven via the fan.

Broil- radiation- The heat is radiated by the ifrared broil element.

Broil & Fan- Radiation and Ventilation- The radiated heat from the infra-red broiling element is distributed throughout the oven via the fan.

It is probably and electrical service issue. If this is a North American unit, it uses two electrical circuits to provide power. You must find and reset the breakers and check that the wiring is operating as intended. Less likely: It could also be a manufacturing defect. DeLonghi uses screw compression connections on some products. Sometimes, they don't work well.

yOU SHOULD NOT HAVE HEAT COMING FROM YOUR OVEN DOORS. MAKE SURE GASKETS ARE INTACT AND YOU OVENS ARE LEVEL.