Question about SanDisk 1GB Cruzer Titanium USB Flash Drive (413072) Hard Drive

3 Answers

Cannot get my USB memory stick to install on XP

Which files need to be in which folders to make XP install a generic USB memory stick.
Also are thre any settings that need to be checked?

Thanks

Posted by on

  • Rob_LA Feb 11, 2008

    I have a sandisk cruzer, titanium 512mb.

    Model: SDCZ3 512

    I have used this to store massive amounts of data that I frequently need to access.

    Recently, when I plugged the device into my computer's USB, I received the following message:
    "USB Device Not Recognized"

    After double clicking on this message, I got the USB Root Hub. The last item on the tree stated:
    "Unknown Device."

    I double-clicked on the unknown device, and in the Device Status box, received the following message:
    "No Drivers installed for this device. If you are having problems with this device,
    click Troubleshoot to start the troubleshooter."

    I attempted to troubleshoot, but the device remains unrecognized. How can I access the data I have stored on this device?

  • rakesh joshi Jun 10, 2013

    "USB Device Not Recognized"

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have a sandisk cruzer, titanium 512mb. Model: SDCZ3 512 I have used this to store massive amounts of data that I frequently need to access. Recently, when I plugged the device into my computer's USB, I received the following message: "USB Device Not Recognized" After double clicking on this message, I got the USB Root Hub. The last item on the tree stated: "Unknown Device." I double-clicked on the unknown device, and in the Device Status box, received the following message: "No Drivers installed for this device. If you are having problems with this device, click Troubleshoot to start the troubleshooter." I attempted to troubleshoot, but the device remains unrecognized. How can I access the data I have stored on this device? I have even tried to install the drivers automatically, but it would not istall succesfully.

xolani.

Posted on Mar 07, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

"USB Device Not Recognized"

Posted on Jun 10, 2013

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,554 Answers

Your motherboard chipset drivers will give you the proper drivers for the usb and management.
it will auto install any needed drivers if it can recognize the stick.
you will have no special drivers needed

Posted on Feb 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Format transcend hard drive to MAC


Easy.... Plug in to USB Port.
Experiment with USB Memory Stick if uncertain.
Use "Disk Utility" located in Utilities folder in Applications Folder. Format for Apple OS Extended (Journaled) if using for Apple Files or Fat32 to transfer data files to & from Windows PC

Oct 04, 2014 | Transcend Hard Drives

1 Answer

Ssd not reconized


click start control panel administrative tools computer management device manager scroll down universal serial bus controllers you could see a yellow question / exclamation mark? ! or a red X

you will need to update/reinstall drivers

right click to reinstall drivers


if you can see your ssd drive but its not working

ports (com&lpt) right click update driver


if this fails to fix the problem


use CMD
this will differ depending on your operating system


click 'start'
run
type "CMD" using xp


click start type in "CMD" press ENTER using windows 7


the type ''xcopy e:\source_folder f:\destination_folder /e /i /h
'' <-- this is only an example!

The /h is just in case there are hidden files. or

click start control panel scroll to folder options view place a tick in show hidden files folders and drives


The /i creates a destination folder if there are multiple source files.

after you copy files from memory stick
reformat your memory stick (too refresh all the memory)
then, after reformat.. goto your backup folder then copy all the files you backed up and paste to their ORIGINAL Folders! :D

Hope this helps.

Dec 01, 2012 | Hard Drives

1 Answer

I'm trying to move files from old computer to new computer.


The easiest way is to use an USB memory stick, plug this USB memory stick into the XP computer and copy the files from the XP computer to the USB memory stick, then remove the USB memory stick and plug it into the Windows 7 computer and copy the files from the USB memory stick to the Windows 7 computer.

Jul 14, 2012 | Hard Drives

4 Answers

How to convert 2gb sd card into 4gb


How to convert 1 or 2GB memory stick into 4GB?
Just follow the simple instructions:
Step1: Insert your memory stick in USB port
Step 2: Open the Drive increaser software folder (download the software)
Step 3: Rename the Pendrive or memorystickimage_thumb%25255b35%25255d.png?imgmax=800
image_thumb%25255b32%25255d.png?imgmax=800
Step 4: Open Drive Increaser 2 icon from the Downloaded folder.
image_thumb%25255b6%25255d.png?imgmax=800
Step 5: The opened file is asks USB drive Name. (Before enter the name first Rename the Memory stick or Pen drive). Just enter the renamed pen drive name. Ex: 2341
image_thumb%25255b16%25255d.png?imgmax=800
Step 6: After that, it will ask USB pendrive letter (Ex: H or I or J). Repeat this two times
image_thumb%25255b43%25255d.png?imgmax=800
Step 7: After Drive letter entry some process will be done with Red color like this image
image_thumb%25255b49%25255d.png?imgmax=800
Step 8: Finally it shows Done Please enter any key to done.
image_thumb%25255b56%25255d.png?imgmax=800

Now your Pen drive is 4GB
image_thumb%25255b63%25255d.png?imgmax=800

Jan 12, 2012 | Kingston (DTIU3/2GB) 2 GB USB Hard Drive

1 Answer

I need to put my photo,s onto a memory stick,dont know how to,i have a cruzer slice 2gb,thank you


I assume that you want to save photos to your memory stick from your computer. Follow this simple steps;
1. Connect the memory stick to one of the usb ports on your computer. (wait for few seconds)
2. Open the "My Computer" and check for a new drive detected. If you had assigned a name to your memory stick, you'll see it with the name or just check out the new drives detected (cruzer has a built-in application which you'll see it as another drive on your computer, you'll not be able to open it, it's only an image/read-only).
3. You can save the images/photos in two simple ways, (a). Open the folder where you saved your photos, right-click on the photo "send to" and then move your mouse towards the memory stick name and select it, refer to the picture below; d26b7ec.jpg

You can do the same with a folders or another files. Or you can select the photos you would like to copy to your memory stick which are saved in a folder on your computer, copy them and open the pendrive/memory stick directory, paste them into it.
4. After you are done, click on the usb icon on the taskbar and again click "safely remove usb mass storage" or similar messages. You'll be presented with another message that you could be able to remove the usb device.
I hope you can follow this instructions, i've tried to simplify, so that you can understand. Well, if you have problem following these, please let me know.
Good luck.
Thanks for using FixYa.

Jun 20, 2010 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

1 Answer

How do i save to my memory stick i have a cv on my wordpad that i would like to save to memory stick


save it first to your computer. plug your USB flash drive to the USB port. it will automatically run. once the folder of the memory stick is already open. left click on your CV press ctrl+c. and then click on the memory stick folder, then press ctrl+v. or u can simply drag the file going to the memory stick folder.

Apr 02, 2010 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

2 Answers

Need to download all files from pc to memory stick


Stick the memory stick into the USB port, next wait for the instructions, open my computer next select the memory stick open it, finally select the file you need to copy to the memory stick, and dump them in it

Mar 26, 2010 | Kingston Technologies 512MB DataTraveler I...

1 Answer

How do I download to a usb flash drive (memory


if you mean put files on it. you go to start--my computer and look for the drive that is your usb. likely named sandisk. double click on it so that the drive folder opens. select the item you want to put on the usb stick. left click on it and hold down the button. drag the item to the usb folder and release the mouse button. it will copy the file to the drive.
if you mean downloading from the internet. when it asks you to save the file. browse to the usb drive and click save.

Sep 02, 2009 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

1 Answer

Dane 2gb memory stick 'write protected'


click start click to open on my computer you should see your usb drive E: right click select properties there will be an array of options select the sharing tab option then advanced sharing make sure you have a tick in the share this folder box then click permissions make sure you have all 3 boxes ticked full control changes and read in windows 7


click start control panel user accounts click on the administrators account if you have made one or you will have to create one in windows XP

click start right click on my computer select open
Right click the icon of your usb drive (It should be E:/ or something)
Click Properties in the menu that comes up
Click the Sharing tab
Click permissions
And finally, click Allow next to Full Control.


hope this helps you

Jan 14, 2009 | Dane-Elec DaneElec 4GB USB Drive Copper...

1 Answer

Usb stick


Hi travlyn,

If you are using Windows XP or Windows Vista, you just need to plug it into a free USB port on your laptop or desktop computer. The OS will automatically find the hardware, then install it. A popup will show up asking what you want to do. You can select there open the folder to open up the contents of the drive. Otherwise you can just close this up and just goto MY COMPUTER and access the USB stick from there.

The USB drive should be ready to receive data, you can actually drag or drop files into it or copy paste the items into the drive. Or if you are making documents or spreadsheets you can directly use the drive to save files.

It's very easy, you should try it out once you're in front of your computer.

Hope this helps!

Peace! :)

Oct 21, 2008 | Kingston (DTIU3/2GB) 2 GB USB Hard Drive

Not finding what you are looking for?
SanDisk 1GB Cruzer Titanium USB Flash Drive (413072) Hard Drive Logo

Related Topics:

761 people viewed this question

Ask a Question

Usually answered in minutes!

Top SanDisk Hard Drives Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

laikexpert
laikexpert

Level 3 Expert

281 Answers

Tony

Level 3 Expert

2598 Answers

Are you a SanDisk Hard Drive Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...