- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
One cause could be a different signal frequency, where are you located? if you are in USA, and are using an Australian or European Wii, or vice-versa, there is your problem.
Another possible cause could be a mixed cable setup, check the video connectors to see if you connected a cable or two on the wrong plug.
Google "Wii Homebrew" and read up on this amazing work people have put so much time and effort on to make it possible to make your Wii region-free and play software Nintendo didnt design. You will have to check what version of firmware the Wii has installed. This is easy though as all you do is open up the menu and look in the upper right hand corner. It should say 3.2E for a PAL [European Wii], 3.2U for NTSC [USA, Canada, and Mexico], 3.2 J for NTSC [Japan]. If it says 4.0 then you will have to wait for someone to find an exploit because Nintnendo has fixed the access point [the way you can install homebrew and start it] in this version of firmware. Just google it and read up on it. Best of luck and hope you dont have 4.0.