Question about SkyScan 86709 Atomic Wall Clock

3 Answers

Manual Information/Owner Guide

Where do I find a Manual for my clock so I can set the time & date manualy as it keeps wanting to dispay naval time, My clock is a skyscan digital display of the time. date, moon cycles, and indoor tempeture, wall/ or table top with four setting buttons on back for SET,+,ALM,SNZ, the front is silver frame.grayish/bluish with frame break between time and date,ect..

Posted by on

  • 4 more comments 
  • MINO12 Mar 28, 2008

    I HAVE A SKYSCAN ATOMIC CLOCK MODEL 28700 I PURCHASED AT SAMS I CANNOT SEEM TO SET TIME AFTER THE TIME CHANGE IN MARCH. PLEASE HELP. NEED MY CLOCK SOON

  • Anonymous Jun 30, 2008

    I am having exactly the same problem. We lost the manual and can't figure out how to get it to MST. Craftylady4u

  • albschwarz Jul 29, 2008

    Need help to set the day & date.

  • revmichelle Oct 21, 2008

    I need a users manual for Skyscan 86715 to set the clock

  • Anonymous Dec 13, 2008

    Where do I find a Manual for my clock (86715) so I can set the time & date
    manually My clock is a skyscan
    digital
    display of the time. date, moon cycles, and indoor tempeture, wall/ or
    table top with four setting buttons on back for SET,+,ALM,SNZ, the
    front is silver frame.grayish/bluish with frame break between time and
    date,ect..

  • emilybh4 Dec 13, 2008

    Where do I find a Manual for my clock (86715) so I can set the time & date
    manually My clock is a skyscan
    digital
    display of the time. date, moon cycles, and indoor tempeture, wall/ or
    table top with four setting buttons on back for SET,+,ALM,SNZ, the
    front is silver frame.grayish/bluish with frame break between time and
    date,ect..

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

In order to toggle display of Temperature, Seconds, Day of Week, and Month, hold + and press Set once. Release and repeat to move through the various display configurations.

Posted on Apr 07, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Please check the following website for all the info and faq.

http://skyscan.info/content/index.php?option=com_content&task=view&id=35&Itemid=40

Also,

If you have lost the outside temperature on the clock display after replacing the transmitter battery then do the following:

1. Make sure you have good batteries installed in the remote transmitter
2. Remove the batteries from the main clock and keep them out until the clock display disappers.
3. Re-install the batteries in the clock.
4. Wait until the display returns and includes the outside temperature display as well.
5. Set the clock again for current time/date etc.
6. Bingo. You are in business.

FixerUpper

Posted on Dec 19, 2008

So where do I get the manual?

Posted on Jun 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Desktop U.S. Atomic clock - Model: SN002 need to set time, date and time zone


Google (U.S. Atomic clock)(SN002)(manual) without parens.

Nov 06, 2016 | Clocks

2 Answers

How do I reset time and date on SioScan Atomic Clock? I need Arizona time zone - i.e. no daylight savings time


Put it into settings and then adjust time/date. It's not related in any way to temperature.

Apr 24, 2015 | Clocks

1 Answer

How do I adjust the settings on a 625-236 atomic clock


If you have a Howard-Miller 625-236 atomic clock, do you need to change the time zone only or manually set the time?

To set the time zone, press Mode (furthest left on the back of the clock) to get to the Alarm Time Mode. Then press Set (2nd from the left) to change the time zone. Then press Adjust (the middle button) to select the correct time zone. Press Mode again to exit the settings mode. To manually set the time, you need to remove the battery from the clock. Then reinsert the battery after 30+ seconds. Press and hold Set until the hour begins to flash, then press Adjust to change the time. Press and hold to quickly change the hour. Then press Set to change to the minutes and use Adjust to set the current minutes. Repeat this routine to set the seconds, month, date and year. Press Mode to exit to the Time mode.

The manual is available here: http://www.theclockdepot.com/howard-miller-625-236-techtime-operations-manual.pdf .

I hope this helps.

Cindy Wells

Oct 06, 2014 | Clocks

1 Answer

Skyscan model 27010 B


You can set it up manualy ,see the info of your model in the link below,some mmodel they have same set up as others,see the picture ,which looks more like your clock.
Cheers

http://skyscanatomicclocks.com/site/owners-manuals/

Nov 07, 2011 | SkyScan 86709 Atomic Wall Clock

1 Answer

88900 Atomic Clock does not read time and temperature.


Batteries must come out of both the temperature sensor (transmitter) and base (clock and temperature display). Leave out for about 4 minutes. Replace the batteries in the temperature sensor FIRST and set it about 5 - 10 feet away from the base. Replace the batteries in the base and leave them both set without touching any buttons for at least 15 minutes (usually only takes 5 minutes or so). The temperature should start to display. You can set the clock manually to the correct time and have it get the updates via radio in the evening or night. Should work after all this just fine. (have done it alot of times this way over the years)

Good luck.

Mar 20, 2009 | SkyScan 86709 Atomic Wall Clock

1 Answer

Have a radioshack atomic wall clock model #


1. Hold down WAVE/SET for about 2 seconds to enter the setting mode.

2. The time zone and DST (Daylight Savings Time) blink. Press + to select your time zone. Press - to turn DST On or Off. The default setings are PST and DST On.

3. Press WAVE/SET again to confirm the setting and enter the year setting mode.

4. The year digits blink. Press + or - to select the year.

5. Press WAVE/SET to confirm the year setting and enter date setting mode.

6. The date digits blink, press + or - to select the time.

7. Press WAVE/SET to confirm the date and enter time setting mode.

8. The time digits blink, press + or - to select the time.

9. Press WAVE/SET to confirm time setting and enter the clock and temperature setting.

10. The time format and temperature blink. Press + to select between 12Hr and 24Hr format. Press - to select between Celsius and Fahrenheit.

11. Press WAVE/SET to confirm whole setting.

SIGNAL: To aquire the signal for the first time, place the clock near a window facing Fort Collins, CO. If it fails, it will try again every 3 hours.

I hope this helps. I work for radioshack and i had a few extra minutes while at work.

Brett.

Mar 11, 2009 | SkyScan 86709 Atomic Wall Clock

1 Answer

SkyScan 87801 how to reset time


Keep pushing the set button until dst shows on the date window then see the clock window it will read on or off press the + button for on or off.

Sep 15, 2008 | SkyScan 86709 Atomic Wall Clock

1 Answer

OUTDOOR TEMPERATURE


Please check the following website for all the info and faq.

http://skyscan.info/content/index.php?option=com_content&task=view&id=35&Itemid=40

Also,

If you have lost the outside temperature on the clock display after replacing the transmitter battery then do the following:

1. Make sure you have good batteries installed in the remote transmitter
2. Remove the batteries from the main clock and keep them out until the clock display disappers.
3. Re-install the batteries in the clock.
4. Wait until the display returns and includes the outside temperature display as well.
5. Set the clock again for current time/date etc.
6. Bingo. You are in business.

Sep 03, 2008 | SkyScan 86709 Atomic Wall Clock

3 Answers

Want to set the clock


Each time you press the set button on the back it selects one of the items that you can set. For example if the "month" is selected by pressing the "set" button then press the "+" key to change it from 1->2->3->4 etc. Each time you press "+" key the month will go up by one. Stop when you reach the correct month. You can do the same for each item including the time zone and daylight savings time and whether you want your temperature to be in Celcius or Farenheit. Hope this helps...

FixerUpper

Sep 15, 2007 | SkyScan 86709 Atomic Wall Clock

Not finding what you are looking for?
SkyScan 86709 Atomic Wall Clock Logo

3,188 people viewed this question

Ask a Question

Usually answered in minutes!

Top SkyScan Clocks Experts

buzz flewhart
buzz flewhart

Level 3 Expert

655 Answers

The Knight
The Knight

Level 3 Expert

68223 Answers

Pieter Vleeshouwers

Level 3 Expert

1410 Answers

Are you a SkyScan Clock Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...